Reviews Shaft Sleeve

uxcell 4mm Drive Shaft, L250mm Shaft, L200mm Sleeve, D36mm Propeller, Fit for 3.17mm Motor Shaft

  • The material OF SHAFT - stainless steel..
  • SIZE - suit for motor shaft diameter: 3.17 mm.
  • drive shaft size: 250 x 4 mm (length*diameter).
  • shaft sleeve size: 200 x 9.5 mm (length*outer diameter).
  • NOTE - there are bearings between the shaft and the shaft sleeve, it could hold on high strength and speed in a whirl..
  • APPLICATION - compatible with DIY model..
  • PACKAGE CONTENT - 1 x Drive shaft assemble kit..
Check Stock

Bettomshin Drive Shaft w Propeller and Universal Joint for RC Boat, L200mm Shaft, L150mm Sleeve, D36mm Propeller, Fit for 3.17mm Motor Shaft

  • 【Parameters】- Shaft length: 20cm/7.8".
  • Suit for motor shaft diameter: 3.17mm/0.12".
  • 【High Quality】- RC boat propeller shaft kit is made of stainless steel,corrosion-resistant,wear-resistant and good sealing..
  • 【Feature】- There is bearings between the shaft and the shaft sleeve, it could hold on high strength and speed in whirl..
  • 【Application】- The propeller shaft is suitable for the different types of boats ,simulation compatible with DIY RC model, such as RC boat toy ,RC submarine and so on..
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Heyiarbeit Drive Shaft Fit for 2mm Motor Shaft w Propeller and Universal Joint for RC Boat, L100mm Shaft, L50mm Sleeve, D36mm Propeller

  • 【Parameters】- Shaft length: 10cm/3.94".
  • Suit for motor shaft diameter: 2mm/0.08".
  • 【High Material】- Remote control boat propeller shaft kit is made of stainless steel, which has good corrosion resistance and wear resistance, and has good sealing performance.
  • 【Advantages】This RC boat drive shaft assemble kit is composed of high quality materials, with speed anti-impact plastic propeller which with light weight and small size designing, is a Good choice for the repairing and replacing of your rc boat..
  • 【Application】- The propeller shaft is suitable for the different types of boats ,simulation compatible with DIY RC model, such as RC boat,RC submarine and so on.
  • 【Note】- This ship assembly is equipped with a bearing between the shaft and the shaft sleeve, which can maintain high strength and high speed when rotating.
Check Stock

Wiseco 74.0Mm Black Anodized Piston Ring Compressor Sleeve By Jm Auto Racing (Rcs07400)

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 7/8" to 1" diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

VGEBY Bicycle Pedals 2pcs Mountain Bike Pedals Non‑Slip Aluminum Alloy Bicycle Platform Flat Pedals

  • Lightweight and durability -- CNC aluminum alloy body, strong and durability. Integrated cutting process, lighter weight, and integrated cutting is not easy to break..
  • With 5 anti‑skid nails -- Stainless steel anti‑skid nails grab the feet and have 5 anti‑skid nails on each side to strengthen the grip and make riding easier..
  • Professional design -- 14mm universal threaded port, chromium‑molybdenum steel shaft universal interface, easy to install, the shaft is firm and not easy to loosen..
  • Waterproof and dustproof -- The sealed shaft sleeve is waterproof and dustproof, anodized, it is not easy to rust, and it is not afraid of daily wind and rain..
  • Good performance -- Chrome‑molybdenum steel shaft, built‑in nylon DU shaft sleeve, high‑speed bearing, saving effort during riding..
Check Stock

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Southwest Speed New 55-56 Chevy Factory Replacement Clutch Pedal KIT TRI-5 1955 1956 150 210 BEL AIR Nomad Includes Pedal Cross Shaft Sleeve BUSHINGS SPACERS Return Spring Bracket Retainer

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Kit that includes a Clutch Pedal Cross Shaft Sleeve, Two Nylon Bushings, Cross Shaft Steel....
  • This Southwest Speed clutch pedal kit is a reproduction of the original clutch pedal parts used on all 1955-1956 Chevy Passenger Cars with manual....
  • Kit Includes: > Southwest Speed Clutch Pedal Cross Shaft Sleeve (SWS # 650-4658) > Southwest Speed Clutch Pedal Cross Shaft Sleeve Nylon Bushings (SWS....
  • Southwest Speed Clutch Pedal Return Spring Bracket (SWS # 650-4662) > Southwest Speed Clutch Pedal Splined Output Arm (SWS # 650-4664) > Southwest....
  • Applications: > 1955-1956 Chevy Bel Air > 1955-1956 Chevy 150 > 1955-1956 Chevy 210 > 1955-1956 Chevy Nomad > 1955-1956 Chevy Sedan Delivery.
Check Stock

X AUTOHAUX 1\ to 1 1/8 Inch -1/4\ Engine Shaft Sleeve Adapter Kit with Step Key for Car

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1" to 1 1/ 8 inch -1/4" diameter. It comes with 2.05" step key..
  • [ ] Made from cold rolled stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

VGEBY Bicycle Pedals 2pcs Mountain Bike Pedals Lightweight Non‑Slip Sealed Bearing Bicycle Platform Flat Pedals

  • Lightweight and durability -- CNC aluminum alloy body, strong and durability. Integrated cutting process, lighter weight, and integrated cutting is not easy to break..
  • With 5 anti‑skid nails -- Stainless steel anti‑skid nails grab the feet and have 5 anti‑skid nails on each side to strengthen the grip and make riding easier.Chrome‑molybdenum steel shaft, built‑in nylon DU shaft sleeve, high‑speed bearing, saving effort during riding..
  • Easy to install -- 14mm universal threaded port, chromium‑molybdenum steel shaft universal interface, easy to install, the shaft is firm and not easy to loosen..
  • Waterproof and dustproof -- Sealed shaft sleeve is waterproof and dustproof, anodized, it is not easy to rust, and it is not afraid of daily wind and rain..
  • Satisfaction Guarantee -- If you are not satisfied with our product received, you can apply for unconditional return within 180 days..
Check Stock

Bapmic Mechatronics Sealing Sleeve and Double D Gasket Compatible with BMW E60 E65 E66 E70 E71 E90 335i

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4"to 7/8" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

SKF 99353 Speedi Sleeve, SSLEEVE Style, Inch, 3.543in Shaft Diameter, 0.526in Width

  • Price For: Each Item : Shaft Repair Sleeve Sleeve Material : Stainless Steel Width on Shaft : 0.526" Shaft Dia. Range : 3.540 to 3.546" Installation Depth : 1.750" Flange Dia. : 4.000" Overall Width : 0.667" Country of Origin (subject to change) : Mexico.
  • The package length is 15.494 centimeters.
Check Stock