Reviews Shaft Mounted

LED Mini Black Arrow Motorcycle Turn Signal Indicator Directional Lights Front/Rear Pair (2 Blinkers) for Aprilia, Buell, BMW, Harley, Honda, Kawasaki, KTM, Moto Guzzi, Suzuki, Triumph, Yamaha

  • Brand New! Sold as a pair. Package includes 2 turn signals. Black in color, arrow shaped, LED light, motorcycle turn signal indicator blinkers. Can be used/mounted on the front and rear as turn signals, brake lights, running lights, or stop lights..
  • Each turn signal indicator blinker has 2 wires and 2 lenses. The front lens is clear with a honeycomb design and the rear side marker lens is smoked amber colored. Each turn signal has 12 leds which give off a very bright amber color when activated. Lights are E-marked meaning they are of the highest quailty having met and exceeded European ECE regulations.
  • Turn signal indicator blinkers are 100% weather-proof and made to resist and handle all types of weather in any type of climate including ice, rain, and snow. Turn signals also have rubber mounted studs and a metal threaded mounting shaft which can help prevent them from being damaged..
  • Dimensions: Overall length (without shaft): 4″ (102mm), Diameter of lens (at longest point): 1″ (25mm), Height of Lens: 2.75″ (70mm), Diameter of shaft: 9/32″ (7mm), Length of shaft: 1″ (25mm).
  • Will fit on most Aprilia, BMW, BSA, Buell, Harley, Honda, Moto Guzzi, KTM, Kawasaki, Suzuki, Triumph, Yamaha models. (Please check that the len....
Check Stock

Walter 12D013 Mounted Point - A-3 Type, A36 Grit Abrasive Grinding Bit for Die Grinders, Pointed Grinders, Shaft Machines

  • Abrasive Grinding: the mounted point is made from finest abrasive grain to ensure long life and a uniform finish. This grinding bit delivers smooth operations with superior performance.
  • Functions: the grinding mounted point is used for fitting, shaping, enlarging holes and other finishing tasks. The unique design of the abrasive point makes it suitable for fine grinding even in confined spaces.
  • Applications: this abrasive mounted point is designed to fit die grinders, point grinders and other flexible shaft machines. The abrasive grinding point is dressed for perfect balance without run-out or vibration.
  • Features: allow the abrasive grinding bits to cut faster and produce a better surface finish. You can use the dressing stones to extend the tool life.
  • Specifications: the finishing mounted point with 1 in. diameter and 2-3/4 in. length is extended by precisely centered 1/4 in. shaft. The metal grinding bit can be used on stainless steel at a maximum speed of 16100 rpm.
Check Stock

Gryphon Studio Stained Glass Grinder

  • ...Mini Automatic Portable Stained Glass Grinder Water Ceramic Glass Machine DIY Desktop Grinding Tool.
  • ►Easy to operate：Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need to apply a layer of lubricant inside.The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.Fixed grinding wheel on the shaft with hexagonal wrench clockwisely..
  • ►Safety Use：Voltage: 110V, 0.1A,Power: 65W,Rotating speed: 4200r/min,Color: Red,Inside the rotary shaft (the fine shaft of the grinding head) diameter: 0.7cm, Grinding wheel inner diameter: 0.79cm.
  • ►Multifunction：Suitable for grinding glass,ceramics and other hard and brittle material.Mini size and easy to carry.Stable and reliable performance.Automatic water available for some sizes(5/8” 1”).New design switch avoid electronic conduction.Glass, ceramics, such as grinding hard brittle materials.Grinding variety of geometric shapes: plane, curve, rounded corners, slope, etc..
Check Stock

Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Flexible Shaft Power Drill Extension with 1/4-Inch keyless Chuck Carded Flex Attachment Adapter Cable Shaft for Rotary Grinder Woodworking Tool Black - By RamPro

  • ✓The flexible shaft lets you see your progress while the sander moves on the contours of your work piece. The Installation of the flex shaft is....
  • ✓Specification: Equipped with a highly flexible extension 1/4-inch scroll chuck and The shaft is intended to be used around 10,000 rpm, mainly for....
  • ✓Quality: The front handle of the flexible shaft is made of strong rubber. This flex shaft can be mounted, which is simple and easy to install, just....
  • ✓Design: The flex shaft’s high quality and vibration-free design is optimally matched to the motor. Ergonomic pen design with a smooth rubber....
  • ✓Satisfied Service and Guarantee - Enjoy a smooth & frustration-free experience with our 100% Satisfied Service in one Month! If you have any....
Check Stock

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

HandsEase 3.175mm Flex Shaft adapter Attachment Flexible Power Drill Extension Cable Chuck for Dremel Rotary Grinder Woodworking Tools with Wrench Gold

  • Dremel flex shaft ergonomic pen design with smooth metal surface makes easy, comfortable carving, sanding and polishing, especially for a long time....
  • HandsEase flex extension no need to match the specifications of the electric grinder interface. As long as your electric grinder or electric drill can....
  • The flex shaft installation is convenient and simple, only need the connector handle be clamped to the electric grinder..
  • The flex shaft connector needs to be connect by electric grinder.(This flex shaft does not have a machine, please choose another machine)..
  • Rotary tool flex shaft can used with polishing kits, drill bits, wire brushes, countersinks, flap wheels, mounted stones and grinding wheels..
Check Stock

TB Woods 2517 TL25171 Taper Lock Bushing, Cast Iron, Inch, 1\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock