Reviews Shaft For P79irons

Tuba Flex Grinder

  • The iron core is soft, durable and flexible to rotate.
  • Flexible shaft is especially suitable where the machines cannot be moved.
  • When using the flexible shaft, the machine starts from the lowest gear, and does not start directly at high speed, which will increase the core loss of the flexible shaft.
  • Pay Attention To : Straightening the flexible shaft as far as possible can prolong the service life.
Check Stock

Martin SDS 2 Quick Disconnect Bushing, Ductile Iron, Inch, 2\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 2 1/2 Quick Disconnect Bushing, Ductile Iron, Inch, 2.5\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin E 2 3/8 Quick Disconnect Bushing, Ductile Iron, Inch, 2.38\ Bore, 3.834\ OD, 2.62\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 1/4 Quick Disconnect Bushing, Ductile Iron, Inch, 1.25\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

DASBET 13pcs Slide Hammer Dent Puller Set with 10lbs Slide Hammer Universal Slide Hammer Auto Body Truck Repair Tool Kit

  • Extra Durable: Heavy duty drop-forged carbon steel construction, tempered and treated with black oxide to resist rust and corrosion for added durability. 10 lb Sliding hammer plated silver, beautiful and long-last.
  • Function: The automotive dent puller is designed to dents form auto body, it repairs the auto body without the inside panel and upholstery..
  • Easy To Use: Solid steel shaft with knurled handle for a sure grip. A long shaft allows a more powerful pulling force. Perfect for both home and business. Solid steel shaft with a knurled handle for a sure grip and a long shaft allows a more powerful pulling force. Perfect for both home and business.
  • Wide Application: This dent puller set can work on most cars and trucks. Removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsteries.
Check Stock

Martin J 100MM Quick Disconnect Bushing, Ductile Iron, Metric, 100 mm Bore, 130.75 mm OD, 114.3 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 24MM Quick Disconnect Bushing, Ductile Iron, Metric, 24 mm Bore, 71.42 mm OD, 49.21 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

MUXSAM 10pcs .370 Black Golf Tapered Ferrules Compatible for Irons Shaft Universal with Single Silver Ring

  • Color:Black. Single Silver Ring Looks So Cool.
  • Golf Iron Ferrules With Single Silver Ring For Iron Shaft.
Check Stock

FEXON Automotive Dent Puller with 13LBS Universal Slide Hammer Auto Body Truck Repair Tool Kit Repair Frame Set with Carrying Case 15PCS

  • ...uller set can work on most cars and trucks. Removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsteries. Comes with a portable plastic case for added protection and transportability..
  • 【EASY TO USE】Solid steel shaft with knurled handle for a sure grip. A long shaft allows a more powerful pulling force. Perfect for both home and business. Solid steel shaft with a knurled handle for a sure grip and a long shaft allows a more powerful pulling force..
  • 【QUALITY ASSURANCE】Heavy duty drop-forged carbon steel construction, tempered and treated with black oxide to resist rust and corrosion for added durability. Use this set on most cars and trucks on door panels, bumpers, fenders, side panels, and roofs..
  • 【WHAT YOU WILL GET】Package include: 1pc handle, 1pc washer, 5pc hasp iron, 1pc long tube hasp iron, 1pc cast iron hammer, 1pc right angle flat steel, 1pc hex taping adaptor, 1pc hex taping screw holder, 1pc taping screw, 1pc connector hasp iron, 1pc double barreled. Versatile puller assortment lets you handle all kinds of pounding and pulling operations..
Check Stock

TB Woods Type JA JAM14MM Sure-Grip Bushing, Metric, 14 mm Bore, 34.9 mm OD, 25.4 mm Length, 198 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 198 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

KUNTEC 13Pcs Automotive Dent Puller with 10lbs Slide Hammer Auto Body Trucks Repair Garage Tools Set

  • Automotive Dent Puller removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsteries.
  • 10-lb. Malleable steel shaft with knurled handle for sure grip. A long shaft allows a more powerful pulling force.
  • This dent puller set can work on most cars and trucks. Perfect for both home and professional mechanic work.
  • Heavy duty drop-forged carbon steel construction, tempered and treated with black oxide to resist rust and corrosion for added durability.
Check Stock

Lifstar 2-1/2-inch Diameter Nylon Pulley, Rope Pulley for Outdoor Clotheslines - Fits 1/4-inch Rope, 4 Pieces

  • 5.95" OUTSIDE DIAMETER , FITS 1-1/8" SHAFT DIAMETER. 1/4 KEYWAY IS STANDARD FOR 1-1/8" SHAFT, 182T & 184T FRAME MOTORS. KEYWAY NOT INCLUDED..
  • THIS CAST IRON DOUBLE GROOVE PULLEY TAKES 2 BELTS AND INCLUDES THE " H " STYLE TAPERED BUSHING..
  • GROOVES WILL FIT THE FOLLOWING V-BELT TYPES ( 3/8" TOP WIDTH 3L / 3LK) (1/2" TOP WIDTH 4L / 4LK / A / AK / AX ).
  • THE TAPERED BUSHING LOCKS ONTO YOUR MOTOR SHAFT AS YOU SCREW DOWN THE LOCK SCREWS, RESULTING IN A SUPER TIGHT INDUSTRIAL TAPERED LOCK..
  • MOTOR PULLEY IS MADE OF CAST IRON, THE H BUSHING IS MADE FROM C45 STEEL WITH BLACK OXIDE FINISH..
Check Stock