Reviews Shaft Driven Motorcycles

212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40/41/420 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter

  • Package Included: 1 x 3/4″ Driver clutch bore, 1 x Overall Diameter 6″ (5/8″ driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate. (As Pictures Shown).
  • Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. 3/4″shaft with flat key.
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton and clones, Kohler, Lifan, Robin, and Tecumseh motors.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM.
  • however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments.
  • Replace Part Number: Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75.
Check Stock

Electric Pto Clutch Repl Grasshopper 606242

  • Fitment:Grasshopper 388767, 388769, 606242, 388771, 388768, 604183, 71379, Kees 7058295, Prime 7-06270, 7-06279, Massey Ferguson 58925, 7058925, McCulloch 58925, 7058925, Craftsman 35520.
  • Fitment: Ariens 00574200, 574200, 09407700, 990003, 990004, 990300, 09049000, Gravely 09049000, Warner 5218-147, 5218-214, 5218-257, 5218-26, 5218-58, 5218-67, 5218-1, 5218-33, 5218-238,.
  • Fitment: Toro Z320 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z325 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z350 2000 (SN 200000001-200999999) 2001 (SN 210000001-210999999), Z355.
  • Its working is totally depends upon the centrifugal force created by the driving member (engine or motor). The centrifugal force is used to engage the clutch with driven shaft. As the engine starts rotating, it produces a centrifugal force which makes the sliding shoes to move outward. Since the drum is connected to the driven shaft, so the power is transmitted from the engine shaft to the transmission shaft and finally to the load..
  • To ensure this part goes with your machine you should always go by the model number and serial number, which is normally found under the seat of your riding mower..
Check Stock

AlveyTech 5/8' Shaft Series 30 Torque Converter Driven Clutch for Coleman KT196 & CK196 196cc 6.5 Hp Go-Karts

  • This Comet TAV2 Series 30 style driven or secondary clutch pulley works in conjunction with a 3/4" shaft driver clutch and an asymmetrical drive belt..
  • Our 5/8" shaft Series 30 torque converter driven clutch for the Coleman KT196 and CK196 196cc 6.5 Hp go-kart is a high-quality aftermarket component of the go-kart's drive system..
Check Stock

TAKPART Electric Lawn Mower PTO Clutch for Warner Grasshopper Snapper Toro 5218-1 5218-67 388769 606242 7058925YP 105-1671

  • Fitment:Grasshopper 388767, 388769, 606242, 388771, 388768, 604183, 71379, Kees 7058295, Prime 7-06270, 7-06279, Massey Ferguson 58925, 7058925, McCulloch 58925, 7058925, Craftsman 35520.
  • Fitment: Ariens 00574200, 574200, 09407700, 990003, 990004, 990300, 09049000, Gravely 09049000, Warner 5218-147, 5218-214, 5218-257, 5218-26, 5218-58, 5218-67, 5218-1, 5218-33, 5218-238,.
  • Fitment: Toro Z320 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z325 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z350 2000 (SN 200000001-200999999) 2001 (SN 210000001-210999999), Z355.
  • Its working is totally depends upon the centrifugal force created by the driving member (engine or motor). The centrifugal force is used to engage the clutch with driven shaft. As the engine starts rotating, it produces a centrifugal force which makes the sliding shoes to move outward. Since the drum is connected to the driven shaft, so the power is transmitted from the engine shaft to the transmission shaft and finally to the load..
  • To ensure this part goes with your machine you should always go by the model number and serial number, which is normally found under the seat of your riding mower..
Check Stock

140H Coupling Rubber Assy for Excavator Doosan DH300 CAT E330B Komatsu PC300

  • The shaft couplings are mechanical component that connect the drive shaft and driven shaft of a motor, etc., in order to transmit power..
  • Shaft couplings introduce mechanical flexibility, providing tolerance for shaft misalignment. As a result, this coupling flexibility can reduce uneven wear on the bearing, equipment vibration, and other mechanical troubles due to misalignment..
  • The size is complete and the surface is smooth, convenient for use. The flexible connection design can absorb vibration and compensate for radial, angular and axial misalignment..
  • This shaft coupling features simple structure and compact size, it is convenient for installation..
  • It is commonly used to connect 3D printer, actuating motors, stepping motors, encoders, machine tool, etc..
Check Stock

Traxxas 82024-4-Tan TRX-4 Sport: 4wd Electric Truck with TQ 2.4GHz Radio System

  • Traxxas 82024-4 - TRX-4 Sport 1/10 4x4 Crawler RTR, Tan.
  • Features: Tough, Lightweight Pickup Truck Body with Low profile bumpers for increased clearance Trail-Tuned XL-5 HV Waterproof Electronic Speed Control Powerful Titan 21T reverse rotation motor with internal cooling fan Portal Axles: Steel Gears, Improve axle geometry and reduce strain on driveshafts Rigid Steel Frame: 1.5mm thick steel frame rails increase torsional rigidity Drivetrain: Full-time shaft driven 4-wheel drive Innovative Battery Compartment: Hinged b.
  • Includes: (1) TRX-4 Sport RTR (1) Radio System (1) Motor (1) ESC Complete Instruction Manual.
  • Specs: Length: 21.93 Front Track: 9.78 inches Rear Track: 9.78 inches Wheelbase: 12.28" Front & Rear Shock Length: 3.54 inches (90mm) Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Crossmembers Drive System: Shaft Driven 4WD Gear Pitch: 32P Hex Size: 12mm.
  • Part number(s) included (in factory packaging): 82024-4.
Check Stock

J.W. Winco 15MGP5 EN519.1 Plastic Cylindrical Handle

  • Hand knob: Techno polymer plastic (Polyamide), black matte finish.
  • Eliminates the need for a thread on the shaft.
  • These cylindrical handles are driven over a lever using a plastic mallet. The shaft end should be slightly rounded or chamfered (30°).
Check Stock

J.W. Winco 12MGP3 EN519.1 Plastic Cylindrical Handle

  • Hand knob: Techno polymer plastic (Polyamide), black matte finish.
  • Eliminates the need for a thread on the shaft.
  • These cylindrical handles are driven over a lever using a plastic mallet. The shaft end should be slightly rounded or chamfered (30°).
Check Stock

MPH Mini Speedometer w/ Indicator Lights 2240:60 & Tachometer 1:4 - Black - LED

  • 003cp003eUniversal mechanically driven mini speedometer and tachometer with 12V LED backlights. Perfect set for custom builds & cafe bikes with a clean minimalist look.003c/p003e.
  • 003cp003e003cstrong003eNOTE:003c/strong003e Tachometer ratio is 1:4. Do your research on what ratio you need before purchase. 2240:60 Speedometer ratio works with most all Japanese motorcycles including Honda, Kawasaki, Suzuki & Yamaha.003c/p003e.
  • 003cp003e003cstrong003eSpeedometer Specifications:003c/strong003e 4 LED indicator lights & dial back light. Mechanically driven. Ratio 2240:60. Measures in MPH (0-140 MPH)003c/p003e.
  • 003cp003e003cstrong003eTachometer Specifications:003c/strong003e Mechanically driven. Ratio 1:4. 0-12000 RPM003c/p003e.
  • 003cp003e003cstrong003eDimensions:003c/strong003e Diameter: 2.5" | Depth: 2"003c/p003e.
  • 003cp003e003cstrong003eSpeedometer Wiring:003c/strong003e Hi Beam: (+) Blue Wire. (-) Blue/Black Wire | Neutral: (+) Green Wire. (-) Green/Black Wire | Oil Pressure: (+) Red Wire. (-) Red/Black Wire | Turn Signal: (+) Yellow Wire. (-) Yellow/Black Wire | Back Light: (+) Orange Wire. (-) Black Wire003c/p003e.
  • 003cp003eCheck Product Description For More Information003c/p003e.
Check Stock

Power Steering Pump Remote Reservoir GM Type 2 Style Natural

  • Shaft has 0.665" O.D. Press-fit Pulley not included.
Check Stock

Motovecor Go Kart Torque Converter for Predator 212 Clutch Set, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, 3/4' 218353A, (0.75' 10T 40/41)-Upgrade

  • Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75.
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75.
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end..
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches.
Check Stock

Ace Pumps FMC-150F-HYD-206 Hydraulic Driven Centrifugal Pump, Flanged, for Open Center Systems Up to 16 GPM (60.6 LPM), 1-1/2" x 1-1/4"

  • MOUNTING VERSATILITY: The location of the pump is not tied to the PTO or engine drive shaft.
  • the pump can be mounted in a variety of locations to suit application requirements.
  • Customized Performance: A hydraulic driven pump can produce higher pressures than PTO or belt driven pumps.
  • EASY MAINTENANCE: On a hydraulic driven pump there are no belts to align or break. Separate pump and hydraulic motor shafts simplify repair and replacement.
  • All pumps are equipped with easily replaceable Viton mechanical seals.
  • They can hold constant pressure at varying engine speeds on closed center hydraulic systems.
Check Stock

Zipbolt Handrail to Newel Post Connector — 13.810 Staircase Railbolt, Banister Post Fastener with 5mm Hex and Wood Plugs, Durable, Easy Installation for Residential and Commercial Use

  • EASILY CONNECT HANDRAILS TO NEWEL POSTS – Attaching handrails to newel posts is no longer a hassle. The patented UT gear-driven mechanism speeds up handrail to newel post installation by eliminating the tedious steps of conventional techniques. The slipfix railbolt's open channel allows the housing to be dropped directly onto the shaft, eliminating the need for cumbersome nuts and washers..
  • FAST INSTALLATION – Perfect for quickly connecting stairway post joints. Assemble the rail bolt shaft and gear housing in the rail, install the keyhole disc, insert the railbolt and push it downwards, then tighten with the included 5mm hex bit using a screwdriver or cordless drill. NOTE: Impact drivers should not be used when tightening the gear housing..
  • A COMPLETE PACKAGE – The package includes everything you need to attach a handrail to a fixed stairway post. It contains 2 slipfix rail bolts, 2 wood plugs, and 1 hex bit (5mm). Use the instructions on the packaging to guide yourself through the installation process..
  • DURABLE CONSTRUCTION – Made with quality steel for maximum durability, these Zipbolts were created by professionals for residential and commercial use. They provide a solid and stable connection without the frustration of traditional methods..
Check Stock