Reviews Sfp Converter

Gigabit Ethernet Multi-Mode LC Fiber Media Converter (SFP SX Transceiver Included), up to 550M, 10/100/1000Base-Tx to 1000Base-SX

  • Seamless Conversion of Copper to Fiber – This media converter kit includes a multimode 1000BASE-SX SFP module(850nm), which enables you to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa.
  • Extend Transmission Distance – By using this ethernet fiber media converter, you can extend link distance up to 550 metres/ 1804 ft via OM3/OM4 multimode fiber (MMF).
  • Plug and Play – Hot-swappable design makes this fiber converter easy to install and troubleshoot for newbies.
  • 1.25G Gigabit Connection – 10/100/1000Mbps Auto-Negotiation RJ45 Port Supporting Auto-MDI/MDIX and Half-Duplex / Full-Duplex Transfer Mode.
  • What You Get – 1* Gigabit Ethernet SFP to RJ45 media converter.
  • 3-year Warranty, Free Lifelong Technology Support.
Check Stock

1.25G/2.5Gbps Two Ports SFP OEO Mode Converter, SFP Repeater (without Transceiver)

  • [How to Use] Singlemode and Multimode converted by transceivers, Dual Fiber and Single Fiber converted by transceivers, SFP to CWDM SFP converter..
  • [Multirate] Support for SFP transceivers with data rates from 100Mbps to 2.5Gbps through two SFP slots. (Important: Use matching speed modules in SFP1 and SFP2 only.).
  • [Protocol Transparent] Compliant with all protocols, as long as the data rate is correct..
  • [Easy Installation and Use] Modulization configuration design, support hot-swappable, plug and play. LED indicators for P1, P2, POWER can dynamic feedback link connection state and fault detection to easily monitor network status..
  • [Warranty] 3-year warranty and lifetime technical support..
Check Stock

10 Gigabit Fiber to 10G Copper UTP Ethernet Media Converter - Open SFP+ 10Gb Slot - 10G Base-T to 10G Base-R - Cat7 UTP 1m Cable in Set - 10 Gbps Gbit Fiber Optic Converter

  • 10G Base-R (Open SFP+ 10G slot) to 10G Base-T UTP Copper RJ-45 port Fiber Media Converter.
  • Convert & Extend Copper Distance of Your High Speed 10gbps network connect far beyond – your SFP+ fiber transceiver distance is the only limit now.
  • Supports any SFP+ 10G transceiver of your choice, be it Single or Multimode, or even WDM single optical fiber type – it’s pure Open SFP+ slot.
  • Important!: 10G base-T RJ-45 UTP port will autoadapt (autosense) to 1000Base-T, 2.5G Base-T, 5G Base-T and 10G Base-T connection at user side, but....
  • You Get Free 1m (3.28 ft.) UTP Cat7 (10G Network Ready) UTP RJ-45 patchcord in set with every 10G Media Converter!.
Check Stock

StarTech.com Singlemode (SM) LC Fiber Media Converter for 1Gbe Network - 10km - Gigabit Ethernet - 1310nm - with SFP Transceiver (ET91000SM10)

  • ETHERNET OVER FIBER EXTENSION: Use this full / half duplex fiber media converter to convert and extend a Gigabit Ethernet connection up to 10km (6.2mi) using singlemode LC fiber cable..
  • INCLUDES SFP: For added convenience, this IT-grade network fiber media converter includes an SFP transceiver (mini gbic), enabling an 1310nm LC single mode Gigabit fiber connection..
  • MAXIMUM DURABILITY: Built to withstand harsh environments, this rugged media converter has a durable steel housing, and has an operating temperature range of 0°C-50°C (32°F-122°F)..
Check Stock

GiTi SFP 10G SFP+ DAC Cable, 10GBASE-CU Twinax SFP+ Cable Direct Attach Copper(DAC) Passive Cable Cisco Compatible for SFP-H10GB-CU0.5M Ubiquiti D-Link Supermicro Netgear Mikrotik, 0.5m (1.64ft)

  • Product Feature: 10Gb SFP+ to SFP+ DAC twinax passive cable 0.5m(1.6ft). 30AWG. High quality chip, fast transmission and low power consumption. All sfp+ dac cables come with dust cover and anti-static packaging..
  • Strict Quality Test: Each DAC cable must pass the signal integrity test and compatibility test before shipment. Compliant to SFP+ MAS, SFF-8432 and RoHS compatible. I/O Connector designed for high speed differential signal applications..
  • Widely Compatible: GiTi SFP 10Gbase sfp+ dac cable is compatible for Cisco SFP-H10GB-CU0.5M, Meraki, Ubiquit, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Linksys, Broadcom, Zyxel, etc..
  • Cost-saving & Effective: 1*twinax cable + 2*SFP+ connectors is equivalent to a 2*10G sfp+ optical module plus an optical fiber jumper, budget-saving, environmental-friendly, stability and durability, no need to expose interfaces and repeated plugging and unplugging..
  • Applications: 10g sfp+ cable is widely used in fiber switch, router, server,firewall, NIC, media converter, data centers, storage area networks, network attached storage, and other fiber optic equipments with SFP+ ports etc..
Check Stock

Wiitek SFP+ to RJ45 Copper Modules, 10GBase-T Transceiver Compatible for Cisco SFP-10G-T-X, Ubiquiti, Netgear, Mikrotik, Unifi (Cat 6a/7 or Better, 30-Meter)

  • WIDE COMPATIBILITY:This 10G Copper SFP+ Transceiver is 100% compatible for Cisco SFP-10G-T-X, Ubiquiti, D-link, TP-LINK, Supermicro, Netgear, Mikrotik, Unifi and Other Open Switches, connecting 10g ethernet Switch, Edge Router, media converter.
  • CABLE DISTANCE:10GBase-T SFP Module supports Links up to 30m using Cat 6a/7 or Better Cable , works for 5GBase-T, 2.5GBase-T using Cat 6a/7, and 1000Base-T using Cat 5e cable or better(10G SFP+ Ports).
  • PROTOCOLS: 10Gb RJ45 SFP Compatible SFF-8431 and SFF-8432 MSA , IEEE 802.3az.
  • Each Module is individually 100% tested on the 10G RJ45 Ethernet Switch before delivery.
  • HOT SWAPPABLE:Hot-swappable transceivers that plugs into an 10Gb SFP+ port,plug and play,no need to power down if installing or replacing.
  • SUPPORT: 30 Days Free-returned, 3-year Product Quality Assurance, Free Lifelong Technology Support..
Check Stock

Add On 1GBS 1 RJ-45 to 2 Sfp Port

  • Add On transceiver/media converter - Network (RJ-45) - 1x PoE+ (RJ-45) ports - multi-mode, single-mode - Gigabit Ethernet - 1000Base-X, 10/100/1000Base-T - 2 x expansion slots - SFP - 2 x SFP slots.
Check Stock

CreativeKIT GLC-SX-MM,1.25G SFP 1000Base-SX, 850nm MMF, 550m DDM Transceiver for Cisco Meraki Ubiquiti and Other Open Switches

  • Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C,Output Power: -8.2~-1dBm,Receiver Sensivity: -11.5dBm,Interface: LC.
  • Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
  • Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
  • Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
  • You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).
Check Stock

Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (3M, OM3-5Pack)

  • ... dual small form factor LC connectors are designed for 10 Gigabit applications in SAN networks and data centers.
  • OM3 LOMMF (laser optimized multi-mode fiber) rated.
  • Compatible with all multimode 50/125 micron fiber cabling Connects to VCSEL laser network equipment such as SFP+ transceivers, Ethernet switches, media converters, industrial Ethernet devices, and optical fiber NIC’s.
  • ★ WIDELY USED — It is Suitable for SFP transceivers and media converters, compatible with HUAWEI and Cisco, such as Cisco Compatible 10GBASE-SR SFP+ Transceiver Module, Cisco SFP-10G-SR Gigabit Interface Converter SFP Module, Cisco SFP-10G-SR 10GBase-SR SFP+ Transceiver, Cisco Compliant 1000BASE-SX SFP Transceiver Module GLC-SX-MM-OEM, Cisco MGBSX1 Gigabit SX Mini-GBIC SFP Transceiver, Cisco GLC-SX-MMD, Cisco Gigabit SX Mini-GBIC..
Check Stock

Digital Optical Audio Cable Toslink Cable - [Cotton Braided Jacket,Durable and Flexible]EMK Fiber Optic Cord for Home Theater, Sound bar, TV, PS4, Xbox & More (6.6Ft/2m)

  • ... dual small form factor LC connectors are designed for 10 Gigabit applications in SAN networks and data centers.
  • OM3 LOMMF (laser optimized multi-mode fiber) rated.
  • Compatible with all multimode 50/125 micron fiber cabling Connects to VCSEL laser network equipment such as SFP+ transceivers, Ethernet switches, media converters, industrial Ethernet devices, and optical fiber NIC's.
  • ★ WIDELY USED — It is Suitable for SFP transceivers and media converters, compatible with HUAWEI and Cisco, such as Cisco Compatible 10GBASE-SR SFP+ Transceiver Module, Cisco SFP-10G-SR Gigabit Interface Converter SFP Module, Cisco SFP-10G-SR 10GBase-SR SFP+ Transceiver, Cisco Compliant 1000BASE-SX SFP Transceiver Module GLC-SX-MM-OEM, Cisco MGBSX1 Gigabit SX Mini-GBIC SFP Transceiver, Cisco GLC-SX-MMD, Cisco Gigabit SX Mini-GBIC..
Check Stock

ECHOGEAR 10U Network Rack - Wall Mountable Heavy Duty 4 Post Design Holds All Your Networking & AV Gear - Open Frame Design Includes 2 1U Vented Shelves & Mounting Hardware

  • ✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up to 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant.10 Pack.
  • ✅Wide Compatible: For Cisco SFP-10G-T-S, Meraki, MikroTik, Ubiquiti UF-RJ45-10G, Unifi, Fortinet, Netgear, D-Link, TP-Link and Other Open Equipments with 10G SFP+ Port..
  • ✅Hot-pluggable: PLUG and PLAY,operating temperature range: -20℃ to 70℃. Widely used in Switches, Server, Routers, NIC, Media Converter,and other fiber optic equipments..
  • ✅Low Power Consumption: The power consumption is only less than 2.5 Watt, that can save costs wisely. Low EMI. Each sfp+ module is individually done test before packing..
  • ✅After-sales service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support..
Check Stock

StarTech.com USB C to Fiber Optic Converter - Open SFP - 1000BASE-SX/LX - Windows / Mac / Linux - USB Ethernet Adapter - USB Network Adapter (US1GC30SFP)

  • Connect to a GbE network through your laptop’s USB-C port using the Gigabit SFP of your choice.
  • USB C to Fiber Optic Converter with open SFP slot compatible with MSA compliant SFP modules (1000BASE-SX/LX).
  • Fiber-to-the-desk connectivity (FTTD) maximizes network security, reducing the risk of data leaks for sensitive information, without compromising network speed and reliability.
  • USB C Ethernet Network Adapter with certified drivers for Windows / macOS / Linux.
  • USB 3.0 to Gigabit Network Adapter provides a fiber network connection to portable laptops or tablets (bus powered) with plug and play functionality and Wake-on-LAN support / SFP Adapter.
  • CONNECTIVITY TOOLS: Provided with this device, the application improves performance and security, featuring MAC Address Changer & Wi-Fi Auto Switch utilities.
Check Stock

StarTech.com Industrial Fiber to Ethernet Media Converter - 1Gbps SFP to RJ45/ Cat6 - Singlemode/Multimode Optical Fiber to Copper Gigabit Network - 12-56V DC - IP-30/ -40 to +75C IMC1GSFP

  • INDUSTRIAL FIBER TO ETHERNET MEDIA CONVERTER: Extends & converts 1Gbps fiber to RJ45 copper w/ hardened operating temp -40C to 75C.
  • OPEN SFP SLOT: Compatible with any standard SFP and can be used for multimode or single mode fiber connections.
  • ROBUST DESIGN: Industrial Gigabit Network Media Converter w/MTBF of 500,000+ hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum....
  • TECH SPECS: 1 Gbps | 12V-56VDC | Single Mode SMF & Multi-Mode MMF Fiber | 16K Jumbo Frames | LFP | IP-30 Housing | DIN or Wall Mountable | Terminal....
Check Stock