Reviews Sewer Drain Hose

Doggie Doo Drain Dog Waste Sewer Line Attachment

  • Screw in Doggie Doo Drain to sewer/septic clean-out and remove Doggie Doo Drain plug.
  • Place waste in Doggie Doo Drain cylinder and rinse down with hose, replace Doggie Doo Drain plug.
Check Stock

POHIR Sewer Jetter Kit for Pressure Washer 100 ft Hydro Drain Jetter Cleaner Hose with 1/4 Female NPT Button Nose Rotating Sewer Jet Nozzle and Pressure Washer Adapter 4000 PSI Drain Cleaner Hose

  • Sewer Jetter Kit for Pressure Washer - This water jet drain cleaner can clear up many types of clog! Package includes: 1 × sewer jet hose 100ft, 2 ×....
  • Includes a Pressure Washer Sewer Drain Jetter Hose - Reinforced 100 FT drain cleaning hose, working pressure up to 4000 PSI & burst pressure to 10000....
  • Includes Sewer Jetter Nozzle Kit - Made of stainless steel. These 3 different shaped jetter nozzles have different functions. 1 × Button nose nozzle....
  • Includes 2pcs M22 to 1/4 NPT - Convert metric M22 14mm female thread to 1/4" female NPT, and then convert this drain cleaner hose to a pressure washer....
  • Includes a m22 male to male adapter - Made of solid brass. Used as a hose extension adapter to combine two jetter hoses for cleaning long lines..
Check Stock

Hourleey Sewer Jetter Kit for Pressure Washer 1/4 Inch NPT 100 Ft Drain Cleaning Hose Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle 4000 PSI

  • Package include: 100 ft drain cleaning hose with 1/4" NPT male connector on the end, Orifice 4.0 button nose, M22 quick connector to 1/4" female....
  • Durable jetter hose: Small-diameter, flexible sewer hose with a connector that allows hoses and nozzles to pass through sewer lines. PE pipe, PVC....
  • Button nose sewer nozzle: 1 front jet located at 0 degree, which can flush the blockage. 3 rear jet at 33 degree, flush away debris loosened by the....
  • Rotating sewer nozzles: 3 rear jets at 33 degree, The nozzle is easy to slide into the drain and sewer lines to clean and flush debris. Orifice: 4.5..
  • Widely application: Suitable for many electric / gas-powered pressure washers up to 4,000 PSI. Hourleey sewer jetter hose can be connected to pressure....
Check Stock

WEOSMIRA Pressure Washer Sewer Jetter Nozzles,4 Pieces, Pointed,Button Nose,Rotating and Corner Jetting Sewer Nozzle,Different Models,Stainless Steel,1/4 Inch Quick Connector,Orifice 4.0, 4.5, 5.5

  • ✿This kit includes four different sewer jetter drain cleaning nozzles. Suitable for different cleaning situation..
  • ✿Applications: The water jetting sewer nozzles are always use to clean indoor or outdoor drainage of many types, combined with any type of pressure washer & a sewer jetter hose, such as house drainage line, clogged toilet, clogged sink, industrial pipe and tube cleaning, general sewer drain cleaning etc. Helpful to unclog various types of indoor and outdoor drainage devices, solve many blockage problems such as oil blocks, fine sand or other obstruction.
  • ✿Durable material: The 4 nozzles are made of quality stainless steel, corrosion resistant rust resistant and durable for long term use..
  • ✿Pressure up to 5000PSI, Hot water up to 310 F..
  • ✿Can be connected to 1/4” sewer jetter hose. ❤❤The nozzles are only used for Pressure Washers connected to a sewer jetter hose,Not fit for Garden hose or Water hose. If any question, please feel free to contact us..
Check Stock

Xiny Tool Sewer Jetter Kit for Pressure Washer 1/4 Inch NPT Drain Cleaning Hose Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle 4000 PSI 100 FT

  • Widely application -- Suitable for many pressure washers up to 4,000 PSI. This sewer jetter hose can be connected to pressure washer pump with....
  • Package include -- 50 ft drain cleaning hose with 1/4" NPT male thread on the end, 4.0 orifice button nose, Rotating nozzle, M22-14mm quick connector....
  • Durable sewer hose -- flexible sewer hose with small diameter that allows hoses and nozzles to pass through sewer lines. PE pipe, PVC coating,....
  • Orifice: 4.5 rotating nozzle -- With 3 rear jets at 33 degree, the nozzle is easy to slide into the drain and sewer lines to clean and flush debris..
  • Orifice 4.0 button nose -- 1 front jet located at 0 degree, which can flush the blockage, the 3 rear jet at 33 degree, flush away debris loosened by....
Check Stock

Camco 20 Ft (43051) Sidewinder RV Sewer Hose Support, Made From Sturdy Lightweight Plastic, Won't Creep Closed, Holds Hoses in Place - No Need for Straps

  • The ultimate protection and support for your sewer hose: The 20 feet Sidewinder RV Sewer Hose Support by Camco lifts and cradles your sewer hose while in connection from your RV to the dump station. It keeps your sewer hose off the ground and prevents potential damage or punctures to your RV or camper sewer hose by safely nesting it in heavy duty plastic.
  • Hassle free preparation and setup: Conveniently ready to use straight of the box with no assembly required. Comes complete with winding sidewinder RV sewer hose support, and orange custom fit storage handle that clasps on to your compressed Sidewinder for simple toting and handling.
  • Lightweight yet durable and sturdy frame: This all plastic design, creates a lightweight and weatherproof product made to last long. It is constructed with a rust and corrosion resistant plastic material that is durable enough to carry your hose over the roughest terrains.
  • Designed for simplicity and reliability – Designed with deep cradles and grooves that will secure your sewer hose in place without having to use frustrating straps. Once sewer hose support is extended to the desired length, will remain in place without creeping closed. Flexible design allows this support to curve around and avoid obstacles with eas....
Check Stock

Camco 43031 10ft Sidewinder RV Sewer Hose Support, Made from Sturdy Lightweight Plastic, Won't Creep Closed, Holds Hoses in Place - No Need for Straps

  • The Ultimate Protection and Support for Your Sewer Hose: The 10 foot Sidewinder RV Sewer Hose Support by Camco lifts and cradles your sewer hose while in connection from your RV to the dump station.
  • It keeps your sewer hose off the ground and prevents potential damage or punctures to your RV or camper sewer hose by safely nesting it in heavy duty plastic.
  • Hassle Free Preparation and Setup: Conveniently ready to use straight of the box with no assembly required.
  • Comes complete with winding sidewinder RV sewer hose support, and orange custom fit storage handle that clasps on to your compressed Sidewinder for simple toting and handling.
  • Lightweight Yet Durable and Sturdy Frame: This all plastic design, creates a lightweight and weatherproof product made to last long.
  • It is constructed with a rust and corrosion resistant plastic material that is durable enough to carry your hose over the roughest terrains.
  • Designed for Simplicity and Reliability: Designed with deep cradles and grooves that will secure your sewer hose in place without having to use frustrating straps.
  • Once sewer hose support is extended to desired length, will remain in place without creeping closed.
  • Flexible design allows this support to curve around and avoid obstacles with ease.
Check Stock

Camco 43041 15ft Sidewinder RV Sewer Support | Made from Sturdy Lightweight Plastic | Won t Creep Closed & Holds Sewer Hoses in Place Black

  • The Ultimate Protection and Support for Your Sewer Hose: The 15 feet Sidewinder RV Sewer Hose Support by Camco lifts and cradles your sewer hose while....
  • Hassle Free Preparation and Setup: Conveniently ready to use straight of the box with no assembly required Comes complete with winding sidewinder RV....
  • Lightweight Yet Durable and Sturdy Frame: This all plastic design, creates a lightweight and weatherproof product made to last long.
  • Designed for Simplicity and Reliability: Designed with deep cradles and grooves that will secure your sewer hose in place without having to use....
  • Increased Sewer Hose Drainage Angled to help in drain sewer hose contents, it is 7.25 inch at its highest point and 4 inch at its lowest.
Check Stock

Tool Daily Sewer Jetter Kit for Pressure Washer, 50 FT Hose, 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle, 3600 PSI

  • Sewer jetting kit include 50 feet sewer jet hose, button nose sewer jet nozzle, rotating sewer jetter nozzle, corner sewer nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick coupler plug..
  • Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4" high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp. Bend radius of the hose is 4.3 inch..
  • Corner Sewer Jetter Nozzle: 1 water sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner..
  • Button Nose Sewer Jet Nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0.
  • Rotating Sewer Jetter Nozzle: 3 backward rotating blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide into sew....
Check Stock

Tool Daily Sewer Jetter Kit for Pressure Washer, 100 FT Hose, 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle, 4400 PSI

  • Sewer jetting kit include 100 feet sewer jet hose, button nose sewer jet nozzle, rotating sewer jetter nozzle, corner sewer nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick coupler plug..
  • Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4″ high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp. Bend radius of the hose is 4.3 inch..
  • Corner Sewer Jetter Nozzle: 1 water sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner..
  • Button Nose Sewer Jet Nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0.
  • Rotating Sewer Jetter Nozzle: 3 backward rotating blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide i....
Check Stock

Xiny Tool Sewer Jetter Kit for Pressure Washer, 50 FT 1/4 Inch NPT Drain Cleaning Hose, Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle, 4000 PSI

  • Widely application -- Suitable for many pressure washers up to 4,000 PSI. This sewer jetter hose can be connected to pressure washer pump with American standard M22 and 1/4" connector. It can also be connected to pressure washer wand via the 1/4" quick connector..
  • Package include -- 50 ft drain cleaning hose with 1/4" NPT male thread on the end, 4.0 orifice button nose, Rotating nozzle, M22-14mm quick connector to 1/4" female thread, 1/4" quick connector to 1/4" female thread and PTFE tape.
  • Durable sewer hose -- flexible sewer hose with small diameter that allows hoses and nozzles to pass through sewer lines. PE pipe, PVC coating, Dual-layer terylene reinforcement, can resist weather, oil, ozone and abrasion..
  • Orifice: 4.5 rotating nozzle -- With 3 rear jets at 33 degree, the nozzle is easy to slide into the drain and sewer lines to clean and flush debris..
  • Orifice 4.0 button nose -- 1 front jet located at 0 degree, which can flush the blockage, the 3 rear jet at 33 degree, flush away debris loosened by the front jet..
Check Stock

Tool Daily Sewer Jetter Kit for Pressure Washer, 1/4 Inch NPT x 100 FT Hose, Sewer Jetting Nozzle Button Nose, Orifice 4.0, 4400 PSI

  • Sewer jetting kit contains sewer jet hose, button nose sewer jet nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick connect plug..
  • Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4″ high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone..
  • Sewer jetting hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp..
  • Button nose sewer jet nozzle: 1 front jet at 0° that clears blockages in the clogged pipe. 3 rear jets at 33° flush out debris loosened by the front jet. It is easy to slide into sewer lines and drain pipes. The jets move the nozzle through the pipe and provides an even cleaning. Ideal for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Orifice 4.0..
  • The sewer jet hose can connect to pressure washer gun or wand with 1/4’’ quick connect plug. It also can connect to pressure washer pump (water outlet) with coupler attached (M22 female to 1/4’’ female NPT coupler)..
Check Stock

RIDGE WASHER Sewer Jetter Kit for Pressure Washer, 50 Feet Hose, 1/4 Inch, Drain Jetting, Laser and Rotating Sewer Nozzle, 4000 PSI, Orifice 4.0, 4.5

  • ★Including sewer jet hose, laser sewer jet nozzle (button nose), rotating sewer jetting nozzle, M22 female to 1/4 inch female NPT coupler and 1/4 inch quick connect plug. Working Pressure is rated to 4400 PSI. Burst Pressure is rated to 11000 PSI..
  • ★50 FT sewer jet hose is ISO 9001 Certified and it is made of 3 parts. Inner tube is made of thermoplastic polyester. Cover layer of is made of thermoplastic polyurethane, able to resist oil, weather, ozone, and abrasion. Reinforcement layer is chemically bonded of 1/4 high tenacity polyester textile braid. Sewer jetter hose has a solid end which connects to sewer nozzle. The other end is swivel which releases stress between sewer hose and gun / pressure washer oulet..
  • ★Rotating sewer jet nozzle has 3 backward spouts that is easy to slide into drain pipes and sewer lines. The orifice is 4.5. Laser nozzle has 1 front jet and 3 rear jets. The 1 front jet at 0°spray angle can clear blockages and 3 rear jets at 33°spray angle can flush out debris loosened by the front jet. The orifice is 4.0..
  • ★The sewer jetter hose can connect to pressure washer pump with M22 coupler (female M22 to female 1/4” NPT). It can also connect to trigger gun or pressure washer wand with 1/4” quick disconnect plug..
Check Stock