Reviews Set Various Control Parameters

DJI Part 14 Command Unit for Ronin-S Gimbal

  • The Ronin S/SC pan/tilt control module is equipped with a display screen and five-dimensional buttons. It integrates pan/tilt setting functions such as motor, working mode and control settings, and can directly use the creative functions. It is easy to set the Ronin S without a mobile device. /SC Parameters and control PTZ shooting..
  • Use the screws on the body of the pan/tilt control module to install only the Ronin-S ports on either side. After installation, turn on the Ronin-S power and the gimbal control module can work..
  • Colossal photography: Set the relevant parameters according to the camera type and select Quick Start, then set the start point and end point of the shooting, and the camera will start shooting after startup. The screen displays the number of shots and the completion progress..
  • Time-lapse photography: Set the relevant parameters according to the camera type and select quick start, and then set the start and end points of the shooting. If the shooting point is delayed, the start and end positions are the same.
  • if the shooting trajectory is delayed, the start and end positions are different. The camera will start shooting after booting up..
  • You will receive: Ronin S/SC PTZ control module*1.
Check Stock

Juried Engineering LM393AP LM393 Precision Dual Differential Comparator, Industrial Grade IC DIP-8 Breadboard-Friendly (Pack of 20)

  • The module is made of high‑quality components and processed with stable performance. It can be widely used in various voltage measurement and control applications..
  • The controller presets 5 different functions and can customize and add other specific functions according to the user's needs..
  • Increase the automatic power saving function, the user can set it autonomously. All setting parameters can be saved automatically, and the setting contents will not be lost when power is off..
  • The voltage monitoring module is a multi-function voltage monitoring controller that uses an industrial-grade microcontroller as the main control unit with a wide measurement range and high accuracy..
  • The user can set the upper voltage limit and the lower voltage limit. Measurement range is 0-100V DC, measurement accuracy +/-0.1V. Newly added 0-99.9 seconds delay pull and 0-99.9 seconds delay off function..
Check Stock

Timer Relay DC 12V 24V Time Delay Relay Controller Board, PEMENOL LCD Display Digital Timer Switch Trigger Cycle Timer Module for Smart Control Power On-Off Controller

  • ★LCD Display Shows a Variety of Parameters: The current mode and parameters are clear at a glance, very clear, simple and practical. In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system. In P4 ~ P7 mode, short press the DOWN key to switch the display content (running time/cycle number).
  • ★Support Button Trigger Control: The relay module delay power off and trigger delay cycle timing circuit switch Support button trigger control, high and low level trigger, switch control, suitable for most occasions.
  • ★With Reverse Connection Protection: This trigger delay cycle timing circuit switch has a key pause function, with reverse connection protection, the reverse connection does not burn.
  • ★Support UART Data Upload and Parameter Setting: You can set different OP, CL, LOP parameters, these parameters are independent of each other and saved separately. All set parameters are automatically saved after power-off. For more details, please read the user manual.
  • ★Automatic Sleep Function: In the running interface (P0~P7 mode), long-press the pause button to start or close the automatic sleep function (L-P selects on to start the sleep function, abou....
Check Stock

INTBUYING GP-403 Automatic Bottle Label Heat Shrink Packaging Machine Cling Shrink Tunnel Film Wrapping Packaging Sealing Machine Continuous Shrink Wrap Machine 220V

  • ✔【Intelligent Operation】 GP-403 bottle mouth label thermal shrink packaging machine can be set various parameters according to different materials, through speed, tunnel temperature and air system, using high precision temperature control meter and solid state voltage regulator combined temperature regulation mode makes a great power saving effect..
  • ✔【Stainless Steel Body】The body is made of stainless steel for durability and longer service life.High quality structure design, with uniform thermal circulation and great label shrinkage effect..
  • ✔【Easy to Operate】Through the control panel, conveyor belt speed, shrinkage temperature and other working parameters can be set, it is very convenient and simple to operate..
  • ✔【Perfect Effect】Adjust the temperature of the shrink position of the label to keep smooth surface of the label.It can be used with production line.Adopt stepless variable speed to transport products, it is more stable and makes more beautiful packaging effect. Can work continuously for a long time..
  • ✔【Appliction】GP-403 Shrink Wrap Machine is applicable to bottles less than 4.1 inches in diameter and less than 13.8 inches in height, The height can be adjusted by height adjustment knob.Bottle mouth label heat shrink....
Check Stock

Yamaha Genos 76-Key Digital Workstation

  • The color touch screen allows you to easily see the state of Voice and Style assignments and quickly access and adjust a wealth of features and settings.
  • Assignable Knobs allow you to manipulate various effects and parameters on Voices, Styles and more, in real time.
  • Assignable Sliders can be configured to control a wide variety of parameters allowing for quick, on-the-fly control during your performance, or while fine tuning your production.
  • The CFX Premium Grand Piano Voice recreates the power and tone of Yamaha's flagship CFX concert grand piano.
  • Revo! Drums take advantage of unprecedented multi-dynamic sample layers and round-robin sample cycling to produce the most realistic MIDI drums ever created.
Check Stock

Square D EHB14020AS Remote Control Circuit Breaker, 20A, 1-Pole, 277V

  • PARAMETERS: Rated Working Voltage: AC100V-240V.
  • MULTI FUNCTIONS: This circuit breaker has voltage, current, power threshold setting, adjustable leakage parameters, electrical parameters, reading of electrical degree measurement, powerful current statistics function..
  • SENSITIVE SIGNAL: The circuit breaker with high sensitive signal acceptance meets various environmental requirements, remote control of electrical equipment such as homes, schools, shopping malls, offices, irrigation farms, water pumps, rental houses, etc..
  • DATA DISPLAY: The computer can be connected with the RS485 port of the switch, and the parameters such as voltage, current, active power, reactive power and leakage value can be read while controlling the switch..
  • AFTER-SALES GUARANTEE: Please feel free to contact us for any questions, and we will do our best to help you!.
Check Stock

CNC Router Engraver 4 Axis USB 1.5KW VFD 6040 CNC Engraving Drilling Milling Carving Machine 3D Cutter Desktop DIY Artwork Woodworking With Remote Controller

  • 【ENGRAVER MACHINE PARAMETERS】(Note: When you receive this machine, please contact us to send you the Operation Video and Mach3 Software.] X Y Z....
  • 【CONTROL BOX PARAMETERS】Operating Voltage: AC 110V.
  • Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive.
  • 【PREMIUM MACHINE】The 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can....
  • 【CAN CONNECT WITH COMPUTER】The mini router frame is movable. The machine can connect with computer as other external device such as printer ,....
  • 【WORK WITH VARIOUS MATERIALS】This Engraving machine can work with various materials(metallic & non-metallic), such as: wood, pmma or other....
Check Stock

[2 Pack] DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LCD Display / 5V Micro USB, Smart Home Controller

  • 【Multifunction Timer Relay】Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc..
  • 【Load Range】Operating voltage: DC 6V - 30V, support micro USB 5V power supply. High level trigger: 3V - 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable)..
  • 【Reverse Protection】Built-in a diode to provide protection against accidental reverse polarity for the circuits..
  • 【Sleep Mode】If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up..
  • 【Parameter Setting】OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time..
Check Stock

Rsrteng CCTV Camera Tester, 4K IP Camera Tester CVBS Camera Tester 7inch IPS Touch Screen Support POE 4K H.265 HDMI 8GB TF Card DC 5V/12V/24V Output IPC Tester IPC-9800Plus+

  • 【IP Camera Tester】Network camera tester support max 12MP 4K H.265/H.264 IP PoE Camera test. Powerful network tools to help you detect and set various network parameters.Support UTP cable test, POE test RJ45 TDR cable test. Its portability, user-friendly design and many other functions make the IPC camera tester an essential tool for all installers..
  • 【Analog CVBS Camera Tester】Support BNC input, NTSC/PAL (Auto adapt). PTZ control, RS485 control, Baud 600-115200bps, compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic etc.IP& CVBS test at the same time, converter test from analog to digital with dual test window..
  • 【Security Tools】The POE function of the network camera tester built-in special tools for Hik and DH, support batches of fast setting of Hik and DH cameras. At the same time, it has built-in OVIF test tool and other brand camera test tools, which can be compatible with most existing cameras. Use it to make your installation simple and efficient..
  • 【More parameters Camera Tester】7 inch IPS touch screen, 1920*1200 resolution. built-in 7.6V/7800mAh 59.28Wh battery. Dual Ethernet port 10/100/1000Mbps, Support RS485, Audio I/O, HDMI output, WiFi, DC output:24V/2A,12V/3A,5V/2A, LED lamp, Uses Android system, so yo....
Check Stock

Rsrteng CCTV Camera Tester, IPCXS-U 4K IP Camera Tester CVBS Camera Tester 7inch IPS Touch Screen Support POE WiFi H.265 HDMI Output 8GB TF Card DC 5V/12V/24V Output IPC Tester

  • 【IP Camera Tester】Network camera tester support max 12MP 4K H.265/H.264 IP PoE Camera test. Powerful network tools to help you detect and set various network parameters.Support UTP cable test, POE test. Its portability, user-friendly design and many other functions make the IPC camera tester an essential tool for all installers..
  • 【Analog CVBS Camera Tester】Don't support AHD CVI TVI SDI camera test! only support CVBS input, NTSC/PAL (Auto adapt). PTZ control, RS485 control, Baud 600-115200bps, compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic etc.IP& CVBS test at the same time, converter test from analog to digital with dual test window..
  • 【Security Tools】The POE function of the network camera tester built-in special tools for Hik and DH, support batches of fast setting of Hik and DH cameras. At the same time, it has built-in OVIF test tool and other brand camera test tools, which can be compatible with most existing cameras. Use it to make your installation simple and efficient..
  • 【More parameters Camera Tester】7 inch IPS touch screen, 1920*1200 resolution. built-in 7.4V/7000mAh battery. Ethernet port 10/100/1000Mbps, Support RS485, Audio I/O, HDMI output, WiFi, DC output:24V/1A,12V/3A,5V/2A, LED lamp, Uses Andro....
Check Stock

KETOTEK Digital Thermostat Outlet Plug Temperature Controller Outlet Socket 120V Heating Cooling Control 110V 15A Celsius/Fahrenheit Display

  • 【Relay output, easy to use】 Plug-and-play design, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V±15% AC.
  • 【Easy to program】 Just set start temperature and stop temperature, this plug in thermostat will work in heating or cooling mode. Temperature control range:-72℉~176℉(-40℃~120℃), temperature control accuracy: ±1%. Celsius and Fahrenheit can be converted. This digital temeprature controller also supports temperature calibration if needed..
  • 【Timing function】 F01 Cycle Timer mode.
  • F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time..
  • 【More functions】 3m NTC 10K temprature sensor probe. Large LCD display. Temperature calibration. Reset function. Data storage function that all parameters set can be saved after power off..
  • 【Wide Range of Application】This temperature controlled outlet plug is widely used for greenhouse, reptile, incubato....
Check Stock

Rsrteng CCTV Tester,IPC-1910C Plus with Cable Tracer 8MP AHD CVI TVI CVBS IP Camera Test 8K HD Display Video Monitor 4 inch IPS Touch Screen IPC Tester Support H.265 POE PTZ RS485 Replace 1800ADH

  • ...t batches of fast setting of Hik and DH cameras. At the same time, it has built-in OVIF test tool and other brand camera test tools, which can be compatible with most existing cameras.Support PoE 48V, maximum power 25.5W, UTP cable test, POE/PSE test.Powerful network tools to help you detect and set various network parameters..
  • 【More parameters&Cable tracer】 : With 4 inch IPS touch screen, 960x640 resolution. built-in 7.4V/2600mAh/19.24Wh rechargeable battery.Normal working time 9 hours.Dual Ethernet port 10/100Mbps,Use Cable tracer to quickly find out the other end of the RJ45 or RJ11 cable from the messy cables in security maintenance and network engineering. Confirms ntework cable location, verifies cable continuity, and detects cable faults. Cemera tester Dimension/Net weight 3.93 x 6.29 x 1.77 inch/0.36kg(0.8lbs)..
  • 【100% Satisfaction Guarantee】Continue to browse our web page wi'll get more detailed parameters.We tested every cctv camera tester before we sent it to the Amazon warehouse, to ensure that you will not receive defective products. We offer 24h technical support and 1 year warranty. If there are any issues, pls feel free to contact us..
Check Stock

KT100 Humidity Temperature Controller 120V 10A Fahrenheit Digital Thermostat Humidistat Control Switch Direct Output with 1.5m Temperature Humidity Sensor

  • 【Dual temperature humidity controller, Great DIY tools】KT100 can work with independent heater or cooler, humidifier or dehumidifier, with °F display . You can connect it to different places as you need, Make them more special..
  • 【Easy setting, wide range】KT100 Thermostat Humidity control the equipment by setting the start/stop temperature/humidity. with -58~176°F temperature range, humidity control range is 10~99%RH..
  • 【Various Function】KT100 Thermostat Hygrometer regulator can set the compressor delay time(0~5min) to make the cooler delay start. By setting high/low temperature/humidity alarm value to keep the home appliance, hatch, greenhouse,ventilator fan, freezer, smoker,and other appliances save..
  • 【Data storage and reset function】All parameters setting can be saved after short circuit and power off, and it also can be reset as requirement..
  • 【Calibrate function】±1°F/±3%RH Control Accuracy with (-30~30°F) Temperature Calibration, (-30~30%RH) Humidity calibration, make the all process more accurate, keep the temperature humidity in desired range..
Check Stock