Reviews Servos Truck

Flysky FS-GT3B RC Transmitter Receiver 2.4Ghz 3 Channel, Rc Car Remote Controller with Flysky GR3E Failsafe Receiver - HOBBYMATE

  • Flysky Fly Sky gt3b radio transmitter Remote Controller with gr3e receiver for rc car, rc truck, rc crawlers, and rc boat..
  • Working frequency between 2.40GHz-2.4835GHz has been divided into 160 frequency points, each system uses 16 points and 160 hopping frequency to avoid frequency jamming.
  • FlySky rc GT3B Radio Transmitter will work with most if not all servos on Rc Car, Rc Truck, Rc Boat.
  • Unique ID for each transmitter: the receiver will automatically check ID after successful pairing, and this dramatically increases the ability of anti-jamming..
  • Model Memory Servos Normal / Reverse Steering Trim / Throttle Trim / Dual Rate / End Point / ABS Settings / EXPO Settings.
Check Stock

INJORA RC Transmitter 2.4GHz 6CH Controler and Receiver with Gyro Remote Inside Receiver for 1/8 1/10 RC Car Boat Tanks Crawler TRX4 SCX10 Upgrade Parts

  • Flysky Fly Sky gt3b radio transmitter Remote Controller with gr3e receiver for rc car, rc truck, rc crawlers, and rc boat..
  • Working frequency between 2.40GHz-2.4835GHz has been divided into 160 frequency points, each system uses 16 points and 160 hopping frequency to avoid frequency jamming.
  • FlySky rc GT3B Radio Transmitter will work with most if not all servos on Rc Car, Rc Truck, Rc Boat.
  • Unique ID for each transmitter: the receiver will automatically check ID after successful pairing, and this dramatically increases the ability of anti-jamming..
  • Model Memory Servos Normal / Reverse Steering Trim / Throttle Trim / Dual Rate / End Point / ABS Settings / EXPO Settings.
Check Stock

ANNIMOS 25kg RC Digital Servo Large Torque High Speed Full Metal Gear Waterproof 180 Degree Control Angle Red

  • ✔New Model:DS3225MG 25kg Servos.More torque,higher speed.
  • ✔Power cord is longer up to 17.7inches(45cm),and also send with a 25T adjustable metal servo arm.
  • ✔Equipped with high precision potentiometers and high-resolution digital chip,ensure stable performance, fast response, strong anti-interference ability,low noise,fast heat dissipation.
  • ✔Best for your DIY Project:compatible with 1/8 and 1/10 scale crawler,truck,buggy,robotic arm,and any application where standard servos are used.
  • ✔Dimensions:1.57 x 0.78 x 1.59in (40 x 20 x 40.5 mm).
Check Stock

2Pcs Vgoohobby Metal 25T Servo Horn Steering Arm for Standard Servo Motors Compatible with Traxxas TRX4 Axial SCX10 Tamiya 1/10 RC Crawler Truck (Red-Black)

  • Compatible with Futaba Savox Emax HSP Power HD Xcore & other popular prand servos motor (DO NOT Compatible with Hitec JR Servos).
  • Fit for 1/10 scale rc crawler car ,for example,these are compatible with Traxxas TRX4 Axial SCX10 SCX10 ii Tamiya CC01 90046 1/10 rc crawler truck.
  • 25 Tooth Spline with M3 Threads,compatible with mostly standard servo motors..
  • 2 Mounting Positions:18mm & 22mm (Measured From Hole Center To Hole Center).
  • Small size and lightweight,easy to install..
Check Stock

2Pack Vgoohobby Aluminum Alloy RC Double Hole 25T Steering Servo Arm Horn Compatible with Recat Axial SCX10 90046 Traxxas TRX-4 1/10 RC Crawler Climbing Car (Red-Black)

  • Compatible with mostly 25T standard servo motors.Compatible with Futaba Savox Emax HSP Power HD Xcore HSP TowerPro MG & other popular prand servos motor(DO NOT Compatible with Hitec JR Servos).
  • Fit for 1/10 scale RC crawler,for example,these 25T servo horn are compatible with Traxxas TRX4 Axial SCX10 SCX10 ii Tamiya CC01 90046 1/10 RC crawler truck.
  • 25 Tooth Spline with M3 Threads,Double-sided mounting hole design..
  • Hole Distance: Approx.20mm / 24mm (Measured From Hole Center To Hole Center).
  • Color:Red-Black/Gold-Black/Silver-Black(Optional).
  • Small size and lightweight,easy to install..
Check Stock

25T Servo Horn Arms RC Metal Aluminum Steering Servo Arm for Standard & High Torque Servo Motors Compatible with Traxxas TRX4 Axial SCX10 Tamiya 1/10 RC Crawler Truck (Gold-Black)

  • It can be works on Futaba, Savox, Emax, HSP, Power HD, Xcore & other popular prand servos motor(Except Hitec and JR Servos)..
  • 2 mounting positions: 18mm and 22mm (measured from hole center to hole center), you can choose the mounting position according to your needs..
  • 25T spline & M3 threads, compatible with mostly standard servo motors..
  • CNC machining makes it precise in size and stable in performance..
  • Suit for 1/10 scale rc crawler car ,for example, compatible with Traxxas TRX4 Axial SCX10 SCX10 ii Tamiya CC01 90046 1/10 rc crawler truck etc..
Check Stock

Traxxas 8247X Metal Servo Horn, Silver

  • Available 25 spline counts to fit most servos as Futaba Savox Power HD HSP MG995 MG996 etc..
  • Fit for Traxxas, Axial SCX10, SCX10 II, AX10, Wraith, Redcat, Tamiya, HSP, HPI, Wltoys 1/10 1/8 RC Crawler truck.
  • CNC machined with 6061 anodized alloy for precision and strength.
  • 12mm, 16mm and 20mm threaded mounting holes for adjustability.
Check Stock

ICQUANZX Servo Tester 3CH Digital Multi Servo Tester RC Aluminum Shell Servo Tester ECS Consistency Speed Controler Checker for RC Helicopter Car Boat

  • High Quality: Aluminum shell, durable and lightweight, easy to operate buttons.
  • 3 modes to check servos or ESC, manual mode, neutral mode, automatic “window wiper” mode.
  • It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency ,also can compare their reaction time respectively.
  • Great for CCPM applications:Servo Tester can connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos.
  • It can use the electric speed controller (ESC) as a signal generator.
Check Stock

GT Power Servo Teste 3CH Digital Multi Servo Tester RC Aluminum Shell Servo Tester ECS Consistency Speed Controler Checker for RC Helicopter Car Boat

  • High Quality: Aluminum shell, durable and lightweight, easy to operate buttons.
  • 3 modes to check servos or ESC, manual mode, neutral mode, automatic “window wiper” mode.
  • It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency ,also can compare their reaction time respectively.
  • Great for CCPM applications:GT Power Servo Tester can connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos.
  • It can use the electric speed controller (ESC) as a signal generator.
Check Stock

Pastall 6PCS 25T Aluminum Servo Horns M3 Threads Metal Steering Arm for RC Car Truck Buggy Airplane

  • ❤ 25T Spine for Futaba and Power HD Servos..
  • ❤ Adjustable type servo arm,includes two steel bolts to secure the split-clamp onto the servo output..
  • ❤ For Vehicle Type: for Buggy, Car, Truck, Truggy.
  • ❤ Hard aluminum construction for precision and durability..
  • ❤ Better than most of the plastic material,Pack of 6..
Check Stock

Flysky FS-GT3C 2.4GHz 3-Channel 3CH Surface Radio R/C RC Car/Boat Transmitter TX

  • FLYSKY GT3C Radio Controller and Receiver is designed for most of popular rc cars, rc truck, and rc boat, it will work with digital servo, and analog servos..
  • 2.4G Radio Controller Radio Transmitter & GR3E Receiver.
  • Comes with a rechargeable battery a USB charge cable..
Check Stock

ANNIMOS 35KG Coreless Digital Motor Servo 7.4V High Speed High Torque Stainless Steel Gear Waterproof Standard Baja Servos 180 Degrees

  • Used For: 1/10 1/8 scale Crawler / Buggy / Truck and any application where waterproof standard servos are used.
  • High precision potentiometers and High-resolution digital chip, stable performance, strong anti-interference ability, fast response, high precision, control is more delicate and smooth operation.
  • Full waterproof servo to maintain good water tightness in wet conditions..
  • Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm).
Check Stock

10PCS ShareGoo 25T Aluminum Servo Horns Arms M3 Threads Metal Steering Arm for RC Car Truck Buggy Airplane-Red

  • Suitable for MOSTLY 25T Standard Servo Motor.For example,Compatible with Towerpro,HSP,HD power,Futaba, Axial ,Savox,Xcore,Standard Servos Motors, MG995 MG996R MG946R ,S3003 etc servo.
  • Adjustable type servo arm,includes two steel bolts to secure the split-clamp onto the servo output..
  • Hard aluminum construction for precision and durability..
  • For RC Scale Type: for RC buggy, rc car, rc truck, rc truggy.
  • Better than most of the plastic material,Pack of 10.
Check Stock