Reviews Servo Motor Drive
Audio-Technica AT-LP120XUSB Direct-Drive USB Turntable (Black) with Knox Gear Vinyl Record Cleaner Kit
- BUNDLE INCLUDES: Audio-Technica AT-LP120XUSB Direct-Drive Analog and USB Turntable (Black) and Knox Gear Vinyl Record Cleaner Kit.
- DC SERVO MOTOR: Direct-drive, servo motor with fully manual operation.
- SELECTABLE: Selectable 33/45/78 RPM speeds.
- ALUMINUM PLATTER: Professional-grade anti-resonance, die-cast aluminum platter with felt mat.
- HEADSHELL: AT-HS6 universal 1/2"-mount headshell and AT-VM95E Dual Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus.
Check StockOrion AstroTrack Drive for EQ-1 Equatorial Telescope Mount
- Economical motor drive provides hands-free celestial tracking for small telescopes.
- Cordless DC servo motor works on Orion EQ-1 and Min-EQ mounts.
- Adjustable drive speed control knob allows precise tracking of both solar system and deep-sky objects.
- Ideal for short-exposure piggyback and planetary astrophotography with small telescopes.
- Requires 9V battery, which provides approximately 35 hours of motorized operation.
Check StockVATOS Spirit Brushless 52km/h High Speed RC Cars 1:16 Remote Control Monster Truck 4WD All Terrain Off-Road 2.4Ghz Shockproof Waterproof RTR Hobby Cars for Intermediate Hobbyist (1:16)
- ... strength, anti-impact PA material chassis and Reinforced Body Frame make the RC car not east to break. Aluminum alloy damping springs, widened suspension system and vacuum rubber tires, all-terrain adaptation, whether on rugged slopes or rough mountain roads are as usual.
- 【UPGRADE DIGITAL SERVE】: 3-wire digital Servo, 1.8kg pull force, 300 pulses per second, compared with analog servo, digital servo provides higher accuracy and better fixed power, faster response, Softer and faster acceleration and deceleration. Digital servo provides higher precision and better fixed power and anti-shake function.
- 【MORE PARAMETERS】: 2 speed mode, 4 wheel drive,2.4Ghz, 80-90m control distance, 7.2V, 60-70 mins charging time,15 mins max speed running time, 6 months free return guarantee.
Check StockLego Mindstorms Ev3 Large Servo Motor
- The EV3 Large Servo Motor is a powerful motor that uses tacho feedback for precise control to within one degree of accuracy. By using the built-in rotation sensor, the intelligent motor can be made to align with other motors on the robot so that it can drive in a straight line at the same speed. It can also be used to give an accurate reading for experiments. The motor case design also makes it easy to assemble gear trains..
Check StockBarnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder
- [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
- [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
- [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
- [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
- [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check StockVEVOR Fabric Cutter 125mm Rotary Fabric Cutter 39mm Cutting Height Wireless Electric Rotary Cutter All-Copper Motor with Low Noise Adjustable Speed Electric Scissors for Cutting Fabric and Cotton
- 【PREMIUM QUALITY】- The blades are made of high-quality, sharp steel blades, sharp-cut and durable. The life of the fabric cutter has been greatly improved because it adopts the advanced servo motor as a power system as well as the direct-drive gearless transmission mode..
- 【ERGONOMIC DESIGN】- The handle of the rotary fabric cutter adopts the ergonomics design with reasonable structure and more comfortable to hold. Miniature high-torque drive blades and non-reduction gearing make the motor energy efficient..
- 【HIGH SAFETY PERFORMANCE】- The outer cover of the blade is equipped with a protective cover. The thicker design is safer and prevents accidental injury. Miniature high torque servo motor as a power system, no carbon brush sparks can be applied in places with open flame restrictions, eliminating fire hazards..
- 【SHARPENING DEVICE】- The electric rotary cutter is designed with a sharpening stone device. The sharpening stone can be replaced as needed without disassembling the blade, which is fast and convenient..
- 【WIDE APPLICATION】- The electric scissors for cuttin....
Check StockMiuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project
- Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
- Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
- Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
- NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
- How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.
Check StockTeam Associated Apex2 Sport A550 Rally Car RTR ASC30126 Trucks Electric RTR 1/10 Off-Road
- 2.4GHz 2-channel radio W/ dvc (dynamic vehicle control) receiver.
- High-torque, Metal-gear Reedy servo with spring style servo saver.
- Water-resistant high-power Reedy Brushless speed control with T-plug connector and LiPo low voltage cutoff.
- Realistic method wheels with 12mm front and rear hex-drive nuts.
Check StockFEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M
- HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
- GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
- SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
- HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
- STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock4Pcs MG996R Servo Metal Gear Torque Digital Servo Motor for Smart Car Robot Boat RC Helicopter
- MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed, tension and accuracy all increase..
- Compatible with most standard receiver connector: Futaba, Hitec, Sanwa, JR..
- Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
- Stable and shock proof, metal gear, connector wire length 300mm..
- Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft for DIY..
Check StockACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
- The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
- SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
- The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
- Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check StockTeam Associated 1/10 DR10M 2 Wheel Drive No Prep Drag Car Team Kit ASC70029 Trucks Electric RTR 1/10 Off-Road
- 2.4GHz 2-channel radio W/ dvc (dynamic vehicle control) receiver.
- High-torque, Metal-gear Reedy servo with spring style servo saver.
- Water-resistant high-power Reedy Brushless speed control with T-plug connector and LiPo low voltage cutoff.
- Realistic method wheels with 12mm front and rear hex-drive nuts.
Check StockFEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More
- HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
- GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
- SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
- HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
- STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock