Reviews Servo Drive Motors

Celestron CGX Computerized German Equatorial Mount and Tripod

Micro Machines Playtronic MAX

• Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
• Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
• This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
• The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
• The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..

Kiro&Seeu L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board Compatible with Arduino Duemilanove Raspberry Pi

• This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip..
• Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel..
• Tested compatible for Arduino Mega, Diecimila & Duemilanove..
• 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter..
• Multi-function, easy to operate, a strong driver library support and feature updates..

Lego Mindstorms Ev3 Large Servo Motor

• The EV3 Large Servo Motor is a powerful motor that uses tacho feedback for precise control to within one degree of accuracy. By using the built-in rotation sensor, the intelligent motor can be made to align with other motors on the robot so that it can drive in a straight line at the same speed. It can also be used to give an accurate reading for experiments. The motor case design also makes it easy to assemble gear trains..

WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)

• 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
• 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
• 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
• 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
• Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.

CenryKay MG90S Servo, Helicopter QC Module 9G Servo Motor Metal Gear Micro Servo Motor Smart Robot Helicopter Plane Boat for Arduino Raspberry Pi Project(6PCS)

• Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
• Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
• This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
• The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
• The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..

2-Pack Metal Aluminum 25T Servo Horn Steering Arms for 1/10 1/8 Scale RC Trucks Cars Buggies Airplane Replacement Upgrade Parts Blue

• Compatible with:25T Spline & M3 threads,Compatible with Mostly Standard Servo Motors for HSP,Power HD,Futaba, Axial ,Savox ,Xcore, MG995 MG996R MG946R....
• The Double Arms：47x10x7.5mm (Hole centers at 12 and 20mm from the servo output.).
• The Short Arm：28x10x7.5mm(Hole centers at 12 and 20mm from the servo output.).
• Spare part:The RC 25T Servo Horn Steering Arms Easy and convenient to install and remove.Better than most of the plastic material..

Aluminum Long 25T Servo Horn w/5 Mounting Holes for Futaba Savox Servo,2-Pack

• 24T Spline & M3 threads,Compatible with Hitec Servo Motors.
• Aluminum CNC machined for precision,anodized finish.
• Includes two steel bolts to secure the split-clamp onto the servo output.
• Dimension:35x15x6mm (Hole centers at 20 and 24mm from the servo output.).

10PCS ShareGoo 25T Aluminum Servo Horns Arms M3 Threads Metal Steering Arm for RC Car Truck Buggy Airplane-Red

• Suitable for MOSTLY 25T Standard Servo Motor.For example,Compatible with Towerpro,HSP,HD power,Futaba, Axial ,Savox,Xcore,Standard Servos Motors, MG995 MG996R MG946R ,S3003 etc servo.
• Adjustable type servo arm,includes two steel bolts to secure the split-clamp onto the servo output..
• Hard aluminum construction for precision and durability..
• For RC Scale Type: for RC buggy, rc car, rc truck, rc truggy.
• Better than most of the plastic material,Pack of 10.

Hobbypark Aluminum Servo Horn 25T Steering Arm Upgrades for Traxxas 1/10 Scale RC Crawler Car,Replacement of 8247X (Red-Black)

• Replace 8247X, 25T Spline & M3 threads, Compatible with Traxxas 1/10 Crawler Car,fit Mostly Standard Servo Motors,Such as Futaba, Power HD,Axial,Savox ,Xcore, HSP, TowerPro MG JX DS3218MG Servo Motors and So on..
• 2 Mounting Positions - 18mm & 22mm (Measured From Hole Center To Hole Center).
• Aluminum CNC machined for precision,Anodized,Easy upgrade from the original part.
• 100% New, Genuine HobbyPark RC Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service..

Hobbypark 5-Pack M3 25T Aluminum Metal Servo Horn for Futaba Savox Xcore HL HSP HD Servo Motors

• 25T Spline & M3 threads Compatible with Mostly Standard Servo Motors.
• Aluminum CNC machined for precision,anodized finish.
• Includes two steel bolts to secure the split-clamp onto the servo output.
• Dimension:35x15x6mm (Hole centers at 20 and 24mm from the servo output.).

Wei Jiang Transformer Leader Class MPM-03 Bumblebee

• At an incredible 19" tall when in robot mode, the TRANSFORMERS Autobot leader is awe inspiring in size and capability..
• In collaboration with Hasbro - Robosen brings your favorite TRANSFORMERS hero, Optimus Prime, to life with a fully immersive experience through voice activated actions, mobile app controls, and endless hours of creative and fun ways to program Optimus Prime to walk, punch, blast, drive, and convert at the swipe of your finger, or command of your voice!.
• Includes Battle Axe and Blaster, Charging Cable, Instruction Guide & Travel Case, and 2 built-in rechargeable batteries..
• Authentic G1 design with detailed emblems, chrome accents and lighting throughout. Built in speakers and 1 microphone bring Optimus Prime to life!.
• Optimus Prime is built premium throughout, with the world's most advanced collection of premium materials assembled together with over 5000 components, 60 microchips and 27 servo motors making this a one-of-a-kind, Collector’s experience!.

Adeept AD002 4 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

• 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
• 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
• Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
• 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
• 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..