Reviews Serial Board

KEYESTUDIO Mega Plus 2560 R3 Board for Arduino with Type-C USB Cable, 1.5A Output, More Powerful MCU Contoller Board

  • This Mega Plus board can work like the Arduino Mega R3 2560 but it is more powerful and has more pins.
  • The USB-to-Serial chip of this board is stable and compatible CP2102.
  • Up to 5V, 1.5A output, can drive drive high-current devices like servo and motor.
  • Additional SPI communication interface, IIC communication interface, Serial communication interface(4 channel).
  • Serial2 (D17 is RX2, D16 equals to TX2), Serial3 (D15 is RX3, D14 is TX3), D0 and D1 are connected to MCU.
  • The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available.
  • How to use: Search for "keyestudio wiki KS0499" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!.
Check Stock

AITRIP 10PCS PCF8574 PCF8574T IO Expansion Board I/O Expander I2C Evaluation Develop Module

  • The PCF8574 IO Expansion Board provides general-purpose remote I O expansion via the two-wire bidirectional I2C-bus (serial clock (SCL), serial data (SDA)..
  • The main resources: PCF8574, I2C interface, the 8-bit parallel.
  • Typical applications: for I / O resource constraints the MCU I / O expansion.
  • PCF8574T expansion board applicable to a variety of platforms including AVR / ARM.
  • PCF8574T PCF8574 IO expansion board support I2C bus cascade (by pin header row seat docking methods can be used simultaneously multiple I2C modules).
Check Stock

ACEIRMC 3pcs IIC I2C TWI Serial LCD 2004 20x4 Display Screen Blue + IIC I2C Module Interface Adapter for Raspberry Pi Arduino (Blue)

  • The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures.
  • LCD2004+I2C 2004 20x4 2004A Blue/Green screen HD44780 Character LCD /w IIC/I2C Serial Interface Adapter Module for arduino.
  • It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL)..
  • Compatible with all devices with I2C interfaces, such as for Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more..
  • please check which chip you have on i2c interface. (Before you upload the code to the control board, please download the LiquidCrystal_I2C library).
Check Stock

KEYESTUDIO Plus Board for Arduino UNO R3 with Type-C USB Cable, 3.3V 5V 1.5A Output Current, More Powerful Controller Board

  • The KEYESTUDIO Plus board can work like the Arduino Board but it is more powerful and has more pins.
  • The USB to Serial chip of this board is stable and compatible CP2102.
  • extend serial communication and I2C interface, 6 PWM and 6 analog ports.
  • special DC-DC design provides up to 5V 1.5A, can drive high-current devices like servo and motor.
  • The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available.
  • How to use: Search for "keyestudio wiki KS0486" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!.
Check Stock

SainSmart USB 4 Channel Relay Automation (5V)

  • NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
  • Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
  • Module with overcurrent protection and relay diode freewheel protection..
  • NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
  • NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.
Check Stock

Norcold 621991001 Refrigerator Power Board Kit

  • Norcold Refrigerator Power Board Kit/Eg2.
  • If you match the picture of the board up with your current one, it will be very evident if this is not the board you need.
  • Fits all N611, N610, N811, & N810 models with a serial number below 9056491..
Check Stock

HiLetgo Smallest SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot Onboard with Antenna 3.7~4.2V

  • Mini GSM / GPRS breakout board is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission..
  • The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode..
  • It communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands..
  • AT command interface with "auto baud" detection..
  • TTL serial port for serial port, you can link directly to the microcontroller.
Check Stock

Techomey Propane Refrigerator for camper, Propane Fridge 1.4 Cu.Ft, Gas Refrigerator 12 V/110V/GAS LPG, 3 Way Refrigerator, Quiet Compact Rv Refrigerator for Semi Truck, Truck, Camper Van, Rv, Garage, Black

  • Refrigerator Control Board Kit - 2-Way, Black, With Optical Control/ Power Board/ Control Adapter/ Thermistor Wire.
  • Replacement For Norcold N621/ N821 Series Refrigerator With Serial Number Below 9126824 And N623/ N823 Series Refrigerator With Serial Number Below 8970880.
  • Package Dimensions: 10.25 x 10.25 x 3.38 inches.
Check Stock

KEYESTUDIO Pico IO Prototype Expansion Board for Raspberry Pi Sheild DIY Kit

  • The Keyestudio Pico IO prototype expansion board works with the Raspberry pico board..
  • It can expand IO ports of the pico board..
  • There are two IIC ports, a serial communication interface , three analog ports and six digital ports..
  • This sensor board simplifies the circuit and makes it easy to connect with commonly used sensors. You can stack a Raspberry Pi pico board onto this shield..
  • KEYESTUDIO Technical Support - If there are any problems during use, please feel free to contact us and we will respond quickly to technical support..
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

Aoicrie 16x2 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter, IIC I2C TWI 1602 Serial LCD Module Display, for Mega 2560

  • IIC I2C TWI 1602 Serial LCD Module Display for R3 Mega 2560 16x2..
  • Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line)..
  • Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly..
  • With a potentiometer used to adjust backlight and contrast.Power supply: +5V, Address of the module: ox27..
  • Widely Applications: LCD display module based on the popular HD44780 controller, works great with for Mega2560 board and other micro-controllers..
Check Stock

Pmnianhua Wall Mounted Folding Desk,Floating Wall Desk Hanging Computer Table for Wall Bedroom Small Space (Pink+White)

  • 【Sturdy structure】 Our wall-mounted computer desk is made of solid wood multilayer board material, which is strong and durable enough to meet your daily needs..
  • 【Ample Storage Space】Features multiple storage compartment, our computer desk provides spacious storage for you to store and display you items..
  • 【Space Saving】Wall mounted and fold up design make our computer perfect for compact space, it offers an ideal space-saving solution for those who want to store essential items and keep the room clean..
  • 【 Elegant & Modern Appearance】Clean lines and stylish design add a modern feel to your home or office, simple appearance make our foldable computer desk matches other furniture very well..
  • 【Size and installation】: The specification is: 32.36" L x 16.77" W x 35.43" H, the product provides an English version of the installation diagram, each board has an installation serial number, install according to the installation serial number order!.
Check Stock

EVISWIY PL2303TA USB to TTL Serial Cable Debug Console Cable for Raspberry Pi 3 Pack

  • 【Built-in PL2303TA Chipset】- this usb to ttl serial cable with built-in PL2303TA chip is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port..
  • 【Wide OS Support】- this usb ttl serial cable is supported by most common OSes such as win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux. (please refer to http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41, and then download the Prolific 2303 driver). If you are running Linux, drivers are already included in the kernel, no need to install anything..
  • 【Power Output】- this usb debug cable can be configured for either v5 or v3.3 power output. Built-in PL2303 chipset has an on-board DC-DC converter..
  • 【Wide Application】- this pl2303 usb ttl cable widely used for laboratories, product testing and low cost MCU communications etc..
Check Stock