Reviews Separate Logic Voltage Support

USB Logic Analyzer Device with USB Cable 5MHz 24MHz 8CH 8 Channel UART IIC SPI Debug Logic Analyzer Professional Microcontroller Device Network Analyzing Set for Ardu-ino FPGA ARM M100 SCM

  • ...y USB resources before the 4 buffers are filled. For these reasons, the logic analyzer cannot always work at the sampling frequency of 24M for a long time, depending on the computer performance, the availability and latency of the USB bandwidth, and other devices that are occupying the USB drive..
  • The normal working voltage of the logic analyzer is below 5.5V, the voltage below 1.5V will be regarded as low level, the voltage between 1.5V and 5.5V will be regarded as high level, the maximum withstand voltage is 7.5V, so please pay attention to the test Voltage..
Check Stock

Flexicution [Explicit]

  • The bi-directional logic level converter is a small device, which can safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time..
  • This level converter works with 2.8V and 1.8V devices, it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage..
  • Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side..
Check Stock

Star Trek The Original Series Logic Of Spock Text Poster T-Shirt

  • The bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time.
  • Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.
  • 3.It can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage.
Check Stock

Juried Engineering TC4011BP Quad 2 Input NAND Gate Breadboard-Friendly (Pack of 5)

  • Product Category: Gates (AND / NAND / OR / NOR) , Logic Family: LS , Logic Type: Bipolar.
  • High Level Output Current: - 0.4 mA , Low Level Output Current: 8 mA, Propagation Delay Time: 15 ns @ 5 V.
  • Supply Voltage (Max): 5.25 V , Supply Voltage (Min): 4.75 V.
  • Maximum Operating Temperature: + 70 C , Minimum Operating Temperature: 0 C , Operating Supply Voltage: 5 V.
  • Package / Case: PDIP-14 , RoHS: Yes , Number of Circuits: Quad, Number of Output Lines: 1 , Number of Lines (Input / Output): 2-IN / 1.
Check Stock

2pcs USB Logic Analyzer Device with USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 SCM

  • ✹✹The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions..
  • ✹✹Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • ✹✹Input voltage range: -0.5V to 5.25V.
  • ✹✹ART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..
  • ✹✹his item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software, but this item is not an official Saleae product. This item is also supported by the free software by Sigrok called PulseView..
Check Stock

Aoicrie USB Logic Analyzer Device with EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug Professional Microcontroller Debug USB Powered FPGA for ARM FPGA M100 SCM

  • This item is an logic analyzer designed to be compatible with Logic Analyzer software, The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input High Voltage: 2.0V to 5.25V, Input Impedance: 1Mohm || 10pF (typical, approximate).
  • A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high, Works with 5V, 3.3V, 2.5V, 2.0V systems. May work with 1.8V but not recommended.Error/Accuracy: pulse-width measurement: +/- 42ns (at 24MHz)..
  • UART, SPI, IIC and other communication debugging, 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols.Suitable for single chip development,ARM system development,FPGA development..
Check Stock

DBParts New for 20PCS SN74HC10N DIP-14 74HC10 74HC10N Triple 3-Input NAND Gates

  • Product Category: Gates (AND / NAND / OR / NOR) , Logic Family: LS , Logic Type: Bipolar.
  • High Level Output Current: - 0.4 mA , Low Level Output Current: 8 mA, Propagation Delay Time: 15 ns @ 5 V.
  • Supply Voltage (Max): 5.25 V , Supply Voltage (Min): 4.75 V.
  • Maximum Operating Temperature: + 70 C , Minimum Operating Temperature: 0 C , Operating Supply Voltage: 5 V.
  • Package / Case: PDIP-14 , RoHS: Yes , Number of Circuits: Quad, Number of Output Lines: 1 , Number of Lines (Input / Output): 2-IN / 1.
Check Stock

UpBright 12V AC/DC Adapter Compatible with LogicMark Guardian Alert 911 GA911 Emergency Button Pendant Model 30511 30911 Logic Mark HHD12-300 HH012-300 HHD12300 Power Supply Cord Battery Charger

  • World Wide Input Voltage 100-240VAC 50/60Hz.OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP:....
  • UpBright New Global 12V AC / DC Adapter Compatible with LogicMark Guardian Alert 911 Emergency Button Pendant Model 30511 Logic Mark 12VDC Power....
  • Fits LogicMark Guardian Alert 911 GA911 Emergency Alert System 30911 Base Unit Logic Mark.
  • Logic Mark Model: HHD12-300 HH012-300 HHD12300 HH012300....
Check Stock

Terasic DE10-Lite

  • ANTI-INTERFERENCE & FASTER: This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed. The transmission baud rate is 9600..
  • PROGRAMMABLE IN LADDER LOGIC LANGUAGE: Program is written in ladder logic programming language, supports ladder logic programming language programming, downloading and monitoring, supports for GX-Developer, GX-work2..
  • SUPPORTS HMI CONNECTION: Supports HMI connection. Programming port is the port for program upload, download and HMI communication..
  • 16 POINT INPUT & 16 TRANSISTOR OUTPUT: The PLC board supports 16 point input and 16 transistor output. Y0-Y3 4 channels output 100k, 200MA, externally added with freewheeling diode up to 3A and Y4-Y17 for 24V, 3A..
  • WIDELY USED: Widely used for fields of printing, metallurgy, food, textile, packaging, home, building materials, plastics, chemicals. The industrial control board is powered by DC 24V. Do not input AC or 220V voltage..
Check Stock

HiLetgo USB Logic Analyzer Device With EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug

  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input Impedance: 1Mohm || 10pF (typical, approximate).
Check Stock

NOYITO USB Logic Analyzer Device with USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug

  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input High Voltage: 2.0V to 5.25V003cbr003e.
  • Input Impedance: 1Mohm || 10pF (typical, approximate).
Check Stock

Comidox 1Set USB Logic Analyzer Device Set USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 Hot

  • This item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software, but this item is not an official Saleae product. This item is also supported by the free software by Sigrok called PulseView..
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz..
  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions..
  • A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high..
  • UART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..
Check Stock

Graphtec America GL240 Data Logger

  • 10 Channels for Voltage, Temp, Humidity, Pulse and Logic Measurements.
  • Isolated Input System Ensures Signals are Not Corrupted by Other Channels.
  • Supports 20mV to 100 Volts, Thermocouple Type: R, S, B, K, E, T, J, N and W and 4 Pulse or Logic Channels with Optional Cable (#B-513).
  • WLAN Compatible Using GL100-WL and Optional Wireless LAN Unit (B-568).
Check Stock