Reviews Sensor Cfl

Woods 59405WD Indoor/Outdoor Light Control Socket With Photocell

  • DUSK to DAWN SENSOR - Equipped with photosell sensor, the light sensor socket is able to turn on/off at dusk to dawn basics, turning your standard light fixture into a automatic dusk to dawn light(Note: Make sure there is no obstacles between the sensor and light source).
  • EASY TO INSTALL - No wiring and programming needed, just screw your light bulb into Light socket, and screw it to the light fixture, make sure the dawn to dusk sensor faces nature light source, for indoor use or under shelter if use outside.
  • OFF DELAY FUNCTION - In order to prevent the bulbs from flickering repeatedly if there is a sudden strong light source, the light bulb socket adapter is programmed with a off delay function which allows the bulb to be off by the light sources lasting for 60S or longer.
  • COMPATIBLE Bulbs - Can be used with Incandescent, CFL, LED, and Halogen bulbs, Incandescent Bulb ≤ 100W, CFL/LED Lamp ≤ 30W, perfect for porch lights, front door lights, garage door coach lights, etc, clear light cover recommended.
  • PROTECT YOUR HOME - When you're away from home, your lights can be automatically turned on and off, detering intruders effectively, and you'll love coming home to having your porch lights on.
Check Stock

Ademco 997 Ceiling-Mount PIR Motion Detector

  • CEILING OCCUPANCY SENSOR uses passive infrared technology, PIR motion sensor to automatically turn ON/OFF lights. This motion sensor features a bright LED indicator when the sensor senses motion..
  • OCCUPANCY SENSOR Two interchangeable Fresnel lenses for perfect detection based on application needs. This allows the sensor to cover any ceiling height from 8 feet to 50 feet..
  • EASY INSTALLATION This ceiling motion detector only requires a 1/2 inch knockout cutting material costs and installation time..
  • MULTI-LEVEL, 360 degree interchangeable lens. Compatible with LED, incandescent, CFL lighting. Easy adjustable sensitivity control via DIP switch. Adjustable sensitivity 50%-100%..
  • LARGE SENSOR RANGE Up to 2800 sq. ft coverage, 360 degree field view, Operating temperature (32 – 131°F), 120VAC 0 - 800W Ballast or Tungsten, UL-Listed, 1-year warranty..
Check Stock

Leviton R02-IPS02-1LW White Single Pole Wide View Motion Activated Light Control

  • For use with incandescent and LED/CFL loads.
Check Stock

DEWENWILS Light Sensor Socket for Light Fixtures, Automatic Dusk to Dawn Light Bulb Sockets, Compatible with Incandescent/CFL/LED/Halogen Bulbs, 2 Pack

  • LIGHT SENSOR - Equipped with photocell sensor, this light socket is able to turn on/off at dusk to dawn basics, turning your standard light fixture into a automatic dusk to dawn light，no need to remember to adjust it by yourself (Note: Make sure there is no obstacles between the sensor and light source).
  • OFF DELAY FUNCTION - In order to prevent the bulbs from flickering repeatedly if there is a sudden strong light source, the product is programmed with an off delay function which allows the bulbs to be switched off after the light sources lasting for 60S or longer.
  • EASY TO INSTALL - No wiring and programming needed, just screw your light bulb into Light Control, and screw it to the light fixture, make sure the sensor faces nature light source, for indoor use or under shelter if use outside.
  • Compatible Bulbs - Can be used with Incandescent, CFL, LED, and Halogen bulbs, Incandescent Bulb ≤ 100W, CFL/LED Lamp ≤ 30W, perfect for porch lights, front door lights, garage door coach lights, etc, clear light cover recommended.
  • PROTECT YOUR HOME - When you're away from home, your lights can be automatically turned on and off, detering intruders effectively, and you'll love coming home to having your porch lights on.
Check Stock

Lutron MS-VPS2-WH Maestro 250 Watt Single Pole Vacancy Sensor Switch, White

  • Automatically turns lights off when room is unoccupied.
  • Meets California Title 24 and other sensor code requirements.
  • Up to 250 W incandescent, halogen, electronic low voltage.
  • To automatically turn lights on AND off, please see Lutron’s occupancy sensor switch, MS-OPS2-XX.
  • The vacancy sensor will only turns off with lack of motion, not on with motion.
Check Stock

ENERLITES High Bay 360 Degree Passive Infrared (PIR) Ceiling Occupancy Motion Sensor, 1200-2800 sq. ft. Coverage, 120-277VAC, Commercial/Industrial Grade, MPC-50H, 8 Pack

  • CEILING OCCUPANCY SENSOR uses passive infrared technology, PIR motion sensor to automatically turn ON/OFF lights. This motion sensor features a bright LED indicator when the sensor senses motion..
  • OCCUPANCY SENSOR Two interchangeable Fresnel lenses for perfect detection based on application needs. This allows the sensor to cover any ceiling height from 8 feet to 50 feet..
  • EASY INSTALLATION This ceiling motion detector only requires a 1/2 inch knockout cutting material costs and installation time..
  • MULTI-LEVEL, 360 degree interchangeable lens. Compatible with LED, incandescent, CFL lighting. Easy adjustable sensitivity control via DIP switch. Adjustable sensitivity 50%-100%..
  • LARGE SENSOR RANGE Up to 2800 sq. ft coverage, 360 degree field view, Operating temperature (32 – 131°F), 120VAC 0 - 800W Ballast or Tungsten, UL-Listed. 1-Year Warranty.
Check Stock

TOPGREENER TDOS5-W Motion Sensor Light Switch, PIR Sensor Switch, Occupancy Sensor Light Switch, Motion Sensor Wall Switch, 500W 1/4HP, Neutral Wire Required, Single Pole, White

  • Sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room.
  • Motion sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements.
  • Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs.
  • Delay times: 15 sec (Test), 10 min, 20 min, 30 min. Adjustable range.
  • NEUTRAL WIRE REQUIRED, 1,200 square feet coverage, 180 Degree View.
  • 120VAC, 500W Incandescent, Halogen, Fluorescent, LED, CFL, Works with all bulb types. Single Pole Only. Wall plate sold separately.
Check Stock

TOPGREENER TSOS5-White In Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, Single-Pole, Fluorescent 500VA/Motor 1/8Hp/Incandescent 500W, Neutral Wire REQUIRED, White, Whi

  • Motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room.
  • AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch.
  • Max Sensor Coverage Area 980 sq ft, 180 degree Field of View. Adjustable range and sensitivity from 30 percent to 100 percent.
  • Variable time delay: 15 sec (test mode), 10 min, 20 min, 30 min..
Check Stock

GE mySelectSmart Wireless Light Control Motion Sensor, On/Off, 1 Outlet, 150 ft. Range from Plug-In Receiver, Ideal for Lamps and Indoor Lighting, No Wiring Needed, Motion-Activated, Mountable, 36235

  • Lighting Control Conveniently control indoor lamps, lights and seasonal dcor with this wireless motion-activated sensor and plug-in receiver featuring 1 polarized outlet.
  • Wireless Sensor The wireless motion sensor provides convenient operation up to 150ft. from receiver and will turn connected device off after 10 minutes without motion.
  • Mount Sensor With a 20ft. detection range, the motion sensor mounts in discrete locations with included mounting hardware or placed on tables, bookshelves, etc.
  • Lighting Network Pairs with multiple receivers and transmitters to expand lighting network using available motion and door sensors, countdown or dimming remotes no wiring or Wi-Fi needed.
  • Electrical Ratings 120VAC, 12A, 60Hz, 360W max. tungsten load, 1440W max. resistive load compatible with LED, CFL and incandescent bulbs.
Check Stock

TOPGREENER Motion Detector Light Switch, in Wall Sensor Switch, Occupancy Sensor Switch 500W LED CFL 1/4HP, Wall Plates Included, Neutral Wire Required, TDOS5, White, 2 Pack

  • MOTION SENSOR GARAGE LIGHT Automatically detects motion from passive infrared sensors to turn lights on and off based on room occupancy and vacancy.
  • PIR SENSOR SWITCH Passive Infrared Detection (PIR): Detects infrared to reduce false triggers from unwanted movements..
  • MOTION SENSOR WALL SWITCH Universal wiring design allows compatibility with any home. Easy install. Two Black Wires, any one connects with hot, and another with load.
  • MOTION SENSOR CLOSET LIGHT Auto ON/OFF, Manual ON/Auto OFF.
  • After install and turning on circuit breaker, allows about 2 minutes to warm up before operating the device..
  • NEUTRAL WIRE REQUIRED, 314 square feet coverage, High range motion detector with 180 Degree View.
  • 500W Incandescent, Halogen, Fluorescent, LED, CFL. Operating temperature (32 – 131°F). Works with all bulb types. Single-pole only. 2 wall plates included.
Check Stock

AIDA Motion Sensor Light Switch Occupancy Motion Activated Wall Switch, No Neutral Wire Needed, Ground Wire Required, Single Polefor CFL/LED/Incandescent Bulb, Included Wall Plate (1 Pack)

  • 【No Neutral Required】 Ground Wire Required, Please confirm that your ground wire is available before purchasing. If you have any installation issues, please consult an electrician or contact us through MASSAGE, We will provide you with 24-hour online technical guidance..
  • 【Universal light control】 Compatible with incandescent bulb 600 W, CFL 300 W, LED 300 W and halogen bulb 120 V. Works with most bulbs on the market..
  • 【Wide Sensing Coverage】 AIDA max sensor coverage is 900 square feet with 180+ fields of view, there's no need to wave at the sensor..
  • 【Multiple styles】There are three color panels: white, ivory and light almond. You can choose the appropriate panel according to your own style..
Check Stock

120V AC Photoelectric Switch Automatic Dusk to Dawn Eye Photocell Sensor for Most Hardwire Outdoor Lamp Fixtures and Bulbs, UL Listed (2-Pack)

  • Reliable Quality: The sensor switch has certified by UL. Being UL certified illustrates our dedication to consumer safety, as well as the quality of our products. Another important caveat of UL certification is for insurance purposes and customer security..
  • Dusk to Dawn Feature: This photocell sensor turns your exterior lights on at dusk and off at dawn. It is smart to control the lighting automatically in accordance with the ambient lighting level..
  • Water-resistant: Equipped a waterproof cap that intended to double protect the sensor lens. It helps the switch to work better against a hard environment..
  • Wide Applications: The switch inputted voltage is 120V AC. It will be compatible with most lamp fixtures: incandescent, fluorescent, CFL, HPS, LEDs. Please note LEDs work with DC and other voltages are not applicable..
  • Guaranteed: We provide a 1-year limited warranty. Please feel free to contact us if you have any questions or quality problems with the sensor. We will respond within 24 hours. Contact us.
Check Stock

Fosmon Wireless Remote Control Electrical Outlet Switch (2 Pack) - ETL Listed, (15A, 125V 1875W) Remote Light Switch Outlet Plug with Braille (On/Off) Mark for Lamp, Lights, Fans, Expandable

  • Photoelectric design: photo eye light sensor is reliable and quality, weatherproof and anti-rust, stable and safe, you can use with confidence.
  • Built-in external photosensitive switch, also applied as a small and rainproof street light controller photoelectric switch.
  • Intelligent detection design: this light sensor photocell turns on your exterior lights at dusk and dawn, automatically control lighting according to ambient lighting levels.
  • The internal design has an automatic ambient light level detection circuit that automatically switches off during the day and on at night.
  • Waterproof to withstand bad weather: equipped with a waterproof cap, photo eye sensor for outdoor lights is designed to double protect the sensor lens, assists the conversion to work better in harsh environments, like rainy, windy, snow day and so on.
  • Multiple compatibility: light switch daylight sensor's voltage is 120V AC, can be compatible with most lamps, such as incandescent, fluorescent, CFL, HPS, LED.
  • Remember that LEDs operate on DC power, other voltages are not suitable.
  • Broad utilization: dust to dawn sensor features time-delay detection circuit, accurate detection of natural light, no accidental light, such as oncoming traffic lights, can be applied to street lights, dome....
Check Stock