Reviews Sell Home Appliance Mould

Express Parts Board Main Control Replacement for Gibson 200D6221G025

  • Express Parts Board Main Control Replacement for Gibson GE 200D6221G025.
  • NO COPY LISTING ALLOWED amazon seller, registered brand. Private Product Label in progress, special kit elaborated to resolve issues during installation for old and new models, sell similar is not allowed..
  • FREE EXPEDITED shipping, 2-4 business days delivered at your home..
  • Compatible: Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others..
  • ONLY FITS MODELS IN DESCRIPTION. How is this kit different? We sell solutions, not parts. This solution includes your installation manual and everything necessary to repair your appliance. Sometimes special tools and/or accessories are included such as cables, etc..
Check Stock

Express Parts Embraco QD TSD2 513605002 Compressor Refrigerator Start Relay Device for WPW10194431

  • Express Parts Embraco QD TSD2 513605002 Compressor Refrigerator Start Relay Device for WPW10194431.
  • NO COPY LISTING ALLOWED amazon seller, registered brand. Private Product Label in progress, special kit elaborated to resolve issues during installation for old and new models, sell similar is not allowed..
  • FREE EXPEDITED shipping, 2-4 business days delivered at your home..
  • Compatible: Frigidaire, Electrolux,Westinghouse, Kenmore, Whirlpool, Maytag, Kenmore, Frigidaire, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others..
  • ONLY FITS MODELS IN DESCRIPTION. How is this kit different? We sell solutions, not parts. This solution includes your installation manual and everything necessary to repair your appliance. Sometimes special tools and/or accessories are included such as cables, etc..
Check Stock

Express Parts Embraco QD TSD2 513605033 Compressor Refrigerator Start Relay Device for Friigidaire 241941005 2689333

  • Express Parts Embraco QD TSD2 513605003 Compressor Refrigerator Start Relay Device for Friigidaire 241941005 2689333.
  • NO COPY LISTING ALLOWED amazon seller, registered brand. Private Product Label in progress, special kit elaborated to resolve issues during installation for old and new models, sell similar is not allowed..
  • FREE EXPEDITED shipping, 2-4 business days delivered at your home..
  • Compatible: Frigidaire, Electrolux,Westinghouse, Kenmore, Whirlpool, Maytag, Kenmore, Frigidaire, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others..
  • ONLY FITS MODELS IN DESCRIPTION. How is this kit different? We sell solutions, not parts. This solution includes your installation manual and everything necessary to repair your appliance. Sometimes special tools and/or accessories are included such as cables, etc..
Check Stock

3 Shapes Storage Box Resin Moulds with Lids Crown Resin Jar Mould Jewelry Jar Silicone Mould Jewelry Ring Box Epoxy Mould Storage Bottle Casting Moulds for DIY Container Soap Candle Trinket Making

  • Nice combination: the package comes with 3 shapes storage box resin moulds with lids, including 1 crown resin jar mould, 1 vintage stripe edge box resin mould, 1 mini jewelry box mould, different styles for you to choose, allow you have a interesting making time.
  • DIY as you want: you can DIY your own jar with different options like glitter powder, mica powder, liquid resin dye or dried flowers and so on, to make a nice home decor or a gift for your family and friend by your imagination.
  • Reliable quality: made of silicone material, smooth and washable, you can clean and store the jewelry jar silicone mould easily, saving you much time and energy.
  • Easy to release: our jewelry ring box epoxy mould is easy to operate, you just need to twist the mould and release your creation out of your mould after the resin is completely cured.
  • Your piece comes out easily, no sticking, no tearing while the mould maintains its shape.
  • Functional usages: ideal for making craft projects and jewellery DIY storage box, gift box, candy box, candlesticks, items containers, flower pot or other items, the finished crafts will also be beautiful decorations for your home, office, shop and other places.
Check Stock

Global Products Refrigerator Water Inlet Valve Compatible with Whirlpool W10420083

  • Global Products Refrigerator Water Inlet Valve Compatible with Whirlpool W10420083.
  • Special kit elaborated to resolve issues during installation for old and new models..
  • The development of this kit is based on the experience of specialized technicians and engineers on home repairs.
  • Compatible: Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others..
  • ONLY FITS MODELS IN DESCRIPTION. How is this kit different? We sell solutions, not parts. This solution includes your installation manual and everything necessary to repair your appliance. Sometimes special tools and/or accessories are included such as cables, etc..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

Solimeta Natural Gas or LP Gas Manifold Pressure Test Kit, LP Gas Pressure Tester, Natural Gas Meter, 0-35' W.C

  • For measuring the low pressure in natural gas or LP gas pressure across appliance manifolds..
  • 2-1/2″ capsule gauge, 40″ Rubber Hose..
  • Pressure range: 0-35″W.C, 2.5-4 for natural gas, 10 to 12 for LP gas..
Check Stock

Ice Roller for Face, Black Facial Ice Roller Mould, Silicone Face Ice Cubes for Skin Care and Pain Relief, Reusable DIY Facial Care Ice Mould

  • 【Easy to Make Ice & Demould】After frozen for no less than 12 hours in the environment below -10℃, submerge one end of the lid of the frozen ice mould under running water for 30 seconds, and then easily remove the lid horizontally..
  • 【Anti-Spill Design】We added a high quality silicone sealing ring to the seam in the middle of the ice mould, which can enhance the sealing performance of the ice mould and prevent the water in the mould from overflowing..
  • 【Good for Skin Care】The face roller with ice on the face can Improve puffiness, Moisturizing before makeup, Soothes and repairs after sun exposure, Shrink pores and tighten skin and Improve fine lines. Different DIY beauty materials can be matched according to your needs. (Such as Cherry Tomatoes, Milk, Rose, Cucumber, Lemon ect).
  • 【Also Good for Pain Relief】This ice mould is a very practical must-have gadget at home. In addition to good for facial rejuvenation, you can Use this ice mould to ice compresses for relieving physical discomfort. (Such as Toothache, Headache, Fever and Sprain ect).
  • 【Practical Gift】This ice mould is approx. 2.2 x 1.6 x 3.9 inch which is very comfortable to hold, small and light design, and easy to grasp, also the ice roller hea....
Check Stock

Silicone molds Butterfly and Flower Halloween Theme Spring Theme Craft Art Silicone Soap Mold Craft Molds DIY Craft Art Soap Making Molds

  • ENJOY SOAP MAKING AT HOME - large silicone soap mould is cute and practical.
  • hand soap mould has a cavities with unique patterns which will make a....
  • RELIABLE MATERIAL - cold process soap mould is made of high-quality silicone, which is food grade, heat and cold, flexible but sturdy enough to serve....
  • PLENTY OF USES - it's good to use these decorative soap moulds not only as bath soap moulds or body lotion bar moulds but also as jello mould,....
  • EASY TO USE - flexibility and surface of the soap making moulds ensure very easy of the handmade soap or dessert.
  • THE BEST HANDMADE GIFTS IDEA - silicone soap mould tray and E-Book with easy homemade soap recipes may serve as the ultimate gift for every creative....
Check Stock

7 Pieces Silicone Resin Casting Moulds Set, Include 2 Universal Lighter Protective Cover Resin Mould Square Coaster Silicone Mould Spice Grinder Epoxy Mould for DIY Craft

  • Package quantity: package comes with 5 pieces silicone resin casting moulds, including 2 x universal lighter protective cover resin mould, 1 x square coaster silicone mould, 1 set of spice grinder epoxy mould, enough for you to make desired crafts.
  • Size detail: the universal lighter protective cover resin mould measures approx. 6.6 x 3.5 cm and 5.2 x 3.5 cm, the square mould is about 9.5 cm in diameter, and the grinder epoxy mould is about 6 cm in diameter, please allow a little error on the size due to manual measurement.
  • Durable material: these resin casting moulds are made of durable silicone material, not easy to break, durable to serve you for long time, and with smooth interiors, reducing the need to cut back and polish the finished resin crafts, easy to release after the resin is fully cured.
  • DIY you own craft: these epoxy DIY moulds are compatible with epoxy resin, wax, soap and other materials, add some sequins, resin dyes, dried flowers and other decors into the mould, to make practical coasters, cup mats, wall decorations, hanging ornaments, home table decors, art works and other DIY projects.
  • Nice gift choice: you can send our silicone resin moulds set to others who are DIY lovers as gifts, or send the finished products to your lover, friends....
Check Stock

Silicone Molds Fairy Butterfly, Beautiful Faery Shape Craft Art Soap Molds, Angel Craft Molds DIY Handmade Soap Molds - Soap Making Supplies by ZKAYX

  • ENJOY SOAP MAKING AT HOME - large silicone soap mould is cute and practical.
  • hand soap mould has a cavities with unique patterns which will make a beautiful design on your soap.
  • RELIABLE MATERIAL - cold process soap mould is made of high-quality silicone, which is food grade, heat and cold, flexible but sturdy enough to serve for a long time.
  • PLENTY OF USES - it's good to use these decorative soap moulds not only as bath soap moulds or body lotion bar moulds but also as jello moulds, silicone cake mould.
  • EASY TO USE - flexibility and surface of the soap making moulds ensure very easy of the handmade soap or dessert.
  • silicone moulds are also easy to clean and store.
  • THE BEST HANDMADE GIFTS IDEA - silicone soap mould tray and E-Book with easy homemade soap recipes may serve as the ultimate gift for every creative person whose favorite hobby is soap making.
Check Stock

Roastove Natural Gas or LP Gas Manifold Pressure Test Kit, LP Gas Pressure Tester, Natural Gas Meter, 0-35" W.C

  • 【Application】For measuring the low pressure in natural gas or LP gas pressure across appliance manifolds..
  • 【CONTENTS】 2-1/2" dial size, 40" Rubber Hose, 1/8"NPT male brass fitting, protected and fit in a mould plastic box..
  • 【RANGE】 0-35"W.C./Ounces per square inch, 2.5 to 4' W.C. for natural gas, 10 to 12" W.C. for LP gas..
  • 【DURABLE】Black steel case, snap on acrylic window, beryllium diaphragm capsule, brass movement and connection..
Check Stock

Measureman Natural Gas or LP Gas Manifold Pressure Test Kit, 0-35 "W.C, 1/4"NPT, 40" Length Hose

  • For measuring the low pressure in natural gas or LP gas pressure across appliance manifolds.
  • 2-1/2" dial size, 40" Rubber Hose, 1/8"NPT male brass fitting, protected and fit in a mould plastic box.
  • Pressure range: 0-35"W.C./Ounces per square inch, 2.5 to 4' W.C. for natural gas, 10 to 12" W.C. for LP gas.
  • Black stel case, snap on acrylic window, beryllium diaphragm capsule, brass movement and connection, lower mount.
Check Stock