Reviews Self centering Chuck

3 Inch 4 Jaw Mini Wood Lathe Chuck Self-centering Lathe Chuck with 1 x 8TPI Thread Lathe Chucks for Woodturning

  • ✔PERFEXT QUALITY:The well-designed chuck body is made of high-quality steel.Will greatly extend the service life of the chuck..
  • ✔APPLICABLE SIZE：The reversible stepped jaws of this mini lathe chuck for internally or externally holding different shapes workpiece,Internal Jaw Clamping Range:3-44mm.External Jaw Clamping Range: 39-85mm..
  • ✔FAST CLAMPING SPEED-This self-centering 3-Jaw chuck does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • ✔FREE ACCESSORIES：We will provide a set of installation tools. Two hand tight spanners are convenient for strengthening and clamping the workpiece..
  • ✔WIDE APPLICATION- The chuck is easy to be used and enjoy a high centering precision.The self-centering scroll type chuck for a variety of parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

Prolinemax 10' Chuck + 220-480 LBS Welding Positioner Positioning Rotary Turn Table Tilt 0-135 Welder 110V

  • Horizontal Loading Capacity: 480 lbs *Without Chuck Attached*.
  • Vertical Loading Capacity: 220 lbs *Without Chuck Attached*.
  • Center Hole Diameter of The Table: 1-1/8''.
  • Unit Weight: 78 lbs (Positioner) 46 lbs (Chuck).
  • Overall Dimension: 11-3/4''L x 15''W x 22-1/4''H with Chuck Attached *estimate only*.
Check Stock

PHUKIMLONG CKS275 2-3/4 Inch Wood Lathe Chuck Set with 1\-8TPI Includes 2.75 Gear Chuck 5 Interchangeable Jaws, 1 Wood Screw,3 Years Warranty

  • PRODUCT INCLUDES: (1) 2.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
  • Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with 8Ea*short and 8Ea*long multi-position grip-studs.
  • Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
  • Application: This CKS275 2-3/4"Wood Lathe Chuck Set includes a 4-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
  • LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..
Check Stock

CKS375 Wood Lathe Chucks, 3.75\ 4-Jaw Self-Centering Scroll Chuck with 1\ x 8TPI Thread Woodworking Turning Tools Set Include( 3.75 Gear Chuck,5 Interchangeable Jaws, 1 Wood Screw)

  • PRODUCT INCLUDES: (1) 3.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
  • Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with short and long multi-position grip-studs.
  • Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
  • Application: This CKS375 3-3/4"" Wood Lathe Chuck Set includes a 5-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
  • LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..
Check Stock

Mophorn K11-200 Lathe Chuck 8 Inch 3-jaw,Lathe Chuck Self Centering Reversible Hardened Steel With Internal and External 2 Set Jaws

  • ...ck includes two sets of internal and external jaws. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • High-Performance Chuck: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Effortless Operation: The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
  • Wide Application: This scroll chuck is highly adaptable and can be used with the same series of jaws, which is suitable for a variety of parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

Wood Lathe Chuck 6 inch 4 Jaws Self-Centering Lathe Chucks Thread 1 x 8TPI Lathe Chuck for Woodturning

  • 【EXCELLENT QUALITY】：The chuck is well-designed and made of high-quality steel. The sturdy chuck can stand high-intensity work.Durable wood Lathe chuck and have a greatly service life ..
  • 【APPLICABLE WORKPIECE SIZE】：Internal Jaw Clamping Range: 0.2-3.9inch (5-100mm). External Jaw Clamping Range: 3.8-5.3inch (98-135mm)..
  • 【FREE ACCESSORIES】：We provide a set of installation tools for free . It can help you better install the chuck and processing on the lathe..
  • 【HIGH PERFORMANCE JAWS】：Each jaw can be adjusted to center with superior gripping force, the self-centering improves the flexibility of the chuck , can clamping most shaped workpieces..
  • 【APPLICATION】：Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System

  • Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes.
  • Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor.
  • Chuck body weighs 4 lbs and is 4" in diameter.
  • Includes #1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal.
  • Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal.
  • Includes screw chuck, allen wrench, and a set of tightening levers.
  • This "C-Series" chuck is compatible with all "C-Series" jaws and accessories.
Check Stock

FJL FORCE Lathe Chuck Sets 4 Inch, Wood Lathe Chuck 5 Interchangeable 4-Jaw Wood Turning Lathe Nickel Plated Chuck, 1\x8Tpi Thread & 3/4\x16Tpi Adapter(Chuck Set)

  • ...PI conversion adapter, a set of 2in dovetail jaws,a set of step jaws, a set of flat jaws,a set of high jaws,a set of round jaws,to meet your creation basic clamping needs,no need to worry about going pairing and finding jaws,bringing much convenience to your operation..
  • 【LONG SERVICE LIFE】 - FJL FORCE 4inch self-centering keyed wood lathe body is made of high-grade K1045 steel,the sturdy wood lathe chuck can withstand high-intensity work without damage,extending the service life of the chuck.The jaws are hardened and hardened surface with black oxide electric coating,stain and wear resistant,not easy to rust,long service life..
  • 【ANTI-JITTER】 - Four-jaw mini lathe chuck has a high-precision self-centering design,the jaw fits perfectly with the chuck,tightening the clamping force beyond your imagination,the keyed fastening mechanism prevents the chuck from loosening during high speed operation,the claw and the disc body is linked with the I-shaped structure more firmly,the gap is small,the precision is high, there will be no jitter,falling problems..
  • 【QUICK INSTALLATION】 - Lathe tools clamping without repeated alignment,just clamp the workpiece according to your needs and use the tightening lever to tighten it,making your work easy,fast and co....
Check Stock

Mophorn Lathe Chuck 4inch “C” Series Chuck Self-centering Lathe Chuck Independent 4 Jaws Mini Lathe Chuck Wood Lathe Bowl Chuck for Woodworking Chuck

  • Premium Quality: The Chuck body is made of quality steel. All guideways and bearing surfaces are precisely machined for better performance. It has high strength and toughness, compression resistance and durability, and long service life..
  • Self-Centering Chuck: Each jaw can be adjusted to center with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized. Round Claw Clamping Range: 1.5"/38 - 2.4"/62 mm mm. Round Claw Support Range: 1.9"/48 - 2.9"/74 mm..
  • Considerate Design: Chuck diameter: 4 inch / 100 mm compact structure is easy for you to carry, store and operate. We give a universal adapter as a gift for kinds of countries to use, and the precise thread inside and texture outside make the whole looks more pretty..
  • Complete Accessories: Includes screw chuck stud. It also includes an T-shaped Allen wrench and a set of tightening levers, which give a great help to chuck installation and removal..
  • Wide Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine access....
Check Stock

VEVOR 2.75-Inch Wood Lathe Chuck, 4-Jaw Precision Self-Centering Keyed Lathe Chuck Set, 1-Inch x 8TPI Thread Mini Lathe Chuck, Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

  • Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 0.9" to 1.9". Outer jaws spread inside of workpieces with pilot holes ranging from 1.4" to 2.5". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, and 1 x wrench to facilitate your work..
  • High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves the flexibility. Clamping most shaped workpieces can also be performed..
  • Simple Operation: This complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
  • Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
  • Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

Mophorn Lathe Chuck 4-inch Nova Chuck Self-centering Lathe Chuck Independent 4 Jaws Mini Lathe Chuck Wood Lathe Bowl Chuck with Set of Accessories in Steel for Woodworking Chuck

  • Premium Quality: The Chuck body is made of quality steel. All guideways and bearing surfaces are precisely machined for better performance. It has high strength and toughness, compression resistance and durability, and long service life..
  • Self-Centering Chuck: Each jaw can be adjusted to center with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized. Round Claw Clamping Range: 1.5"/38 - 2.4"/62 mm. Round Claw Support Range: 1.9"/48 - 2.9"/74 mm..
  • Considerate Design: Chuck diameter: 4 inch / 100 mm compact structure is easy for you to carry, store and use. We give a universal adapter as a gift for kinds of countries to use, and the precise thread inside and texture outside make the whole looks more pretty..
  • Complete Accessories: Includes screw chuck stud. It also includes an T-shaped Allen wrench and a set of tightening levers, which give a great help to chuck installation and removal..
  • Wide Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, ....
Check Stock