Reviews Self adjusting Clutch

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.
Check Stock

20 Case Rainbird 5004 Plus + Rotor 4' 5000 Series Head Sprinkler 4' Rotors 5004-PC +

  • 4 in. 5000 Series Part/Full-Circle Pattern Pop-up Rotor with Flow Shut-Off.
  • Faster maintenance with a new self-cleaning arc adjustment screw - Heavy-duty cover assembly for extra durability.
  • Rain Curtain Nozzles - Slip clutch mechanism for quick adjustment on installation.
  • Heavy-duty retract spring assures positive pop-down - Top-adjust arc adjustment requiring only a flat-blade screwdriver.
  • 40 - 360 Degree arc rotation and reversing full circle rotation in one.
Check Stock

Rainbird 5000 Plus Series Part/Reverse Full Circle with 2.0 GPM Nozzle Installed, 4'

  • 12 in. 5000 Series Part-Circle Pattern Pop-up Rotor with PRS Pressure Regulation and SAM Check Valve.
  • Faster maintenance with a new self-cleaning arc adjustment screw.
  • Heavy-duty cover assembly for extra durability - Rain Curtain Nozzles.
  • Slip clutch mechanism for quick adjustment on installation - Heavy-duty retract spring assures positive pop-down.
  • Top-adjust arc adjustment requiring only a flat-blade screwdriver - 40 - 360 Degree arc rotation and reversing full circle rotation in one.
Check Stock

Rainbird 5000 Plus Series Pressure Regulator Part/Reverse Full Circle Rotor with Seal-A-Matic, 12'

  • 4 in. 5000 Series Part-Circle Pattern Pop-up Rotor.
  • Faster maintenance with a new self-cleaning arc adjustment screw - Heavy-duty cover assembly for extra durability.
  • Rain Curtain Nozzles - Slip clutch mechanism for quick adjustment on installation.
  • Heavy-duty retract spring assures positive pop-down - Top-adjust arc adjustment requiring only a flat-blade screwdriver.
  • 40 - 360 Degree arc rotation and reversing full circle rotation in one.
Check Stock

OEMTOOLS 27171 Adjustable Fan Clutch Holding Tool, Fan Clutch Removal Tool, Fan Clutch Puller, OEM Fan Clutch Tool, Fan Clutch Pulley, Fan Clutch Set

  • SPEED UP YOUR REPAIRS: Add the fan clutch holding tool to your fan clutch removal tool kit to quicken your repair process.
  • Designed to hold fan clutch with less work.
  • ADJUSTABLE JAW: The clutch fan removal tool features adjustable jaws that fit most water pump pulley bolt patterns, including pressed-on pulleys.
  • Jaws on the universal fan clutch removal tool lock in place, securing water pump bolts.
  • EXTRA LEVERAGE: The longer, high-visibility red handle on the fan clutch removal tool provides leverage for extra torque, helping to eliminate physical strain.
  • ELIMINATE NEED FOR MORE TOOLS: The clutch fan tool for your fan clutch removal kit is way more effective than trying to use a pry bar or wrench to hold the fan clutch.
  • MORE THAN ONE PULLEY: The fan clutch holder for your clutch fan tool kit also holds the camshaft pulley when replacing cam belt.
  • The OEM fan clutch removal tool is versatile.
Check Stock

OCPTY Electric PTO Clutch 388740 Fit for Grasshopper for Woods: 388740; for Big Dog for Hustler: 601311, 601311K; for Warner for Hustler for Big Dog: 5218-154; for Stens: 255-642, 255-552

  • FITS THE POWER TAKE OFF CLUTCH - The PTO Clutch fit for Grasshopper: Model 218 430D 220 223 225 226V 227 321D 322D 325 329 428D.
  • for Big Dog Mowers: X-Series - All Models.
  • for Hustler/for Excel: Mini Z 44" & 52, Super Mini Z 44" & 52.
  • ADJUSTABLE WEAR - All PTO clutches can be adjusted for wear. This saves costs and saves end-user downtime. Since the clutch can be adjusted on the machine, the end user can greatly extend the service life of the clutch on the machine..
  • DIMENSION OF THIS CLUTCH: Crankshaft: 1.125", Pulley OD: 6.375", Direction: CW, Toque: 200lbs.
  • SIMPLE INSTALLATION - Since the majority of clutches are one piece designs that come in pre-set, there are no adjustments to make either at the mower manufacturer or with the end user. Both the clutch and the brake functions are contained in one single unit taking up a relatively small amount of space..
  • ATTENTION - Match the original PTO Clutch perfectly. Please verify the fitment of the part number. If the Power Take Off Clutch ever fails on your machine, please contact us,.
Check Stock

OCPTY Electric PTO Clutch 717-04376 Fit for Bolens for Cub Cadet for Huskee for MTD for Sears Craftsman for Troy Bilt for White Outdoor: 717-04376, 717-04376A, 917-04376, 917-04376A

  • FITS THE POWER TAKE OFF CLUTCH - the PTO Clutch fit for Bolens, for Cub Cadet, for Huskee, for MTD, for Sears Craftsman, for Troy Bilt, for White Outdoor with 717-04376.
  • ADJUSTABLE WEAR - All PTO clutches can be adjusted for wear. This saves costs and saves end-user downtime. Since the clutch can be adjusted on the machine, the end user can greatly extend the service life of the clutch on the machine..
  • OPERATOR CONVENIENCE - Rather than an operator trying to fight against a mechanical linkage or a belt idler, a simple flip of a switch will engage the clutch, resulting in less operator fatigue..
  • SIMPLE INSTALLATION - Since the majority of clutches are one piece designs that come in pre-set, there are no adjustments to make either at the mower manufacturer or with the end user. Both the clutch and the brake functions are contained in one single unit taking up a relatively small amount of space..
  • ATTENTION - Match the original PTO Clutch perfectly. Please verify the fitment of the part number. If the Power Take Off Clutch ever fails on your machine, please contact us,.
Check Stock

Universal Motorcycle 7/8' 22mm Handlebar Brake Master Cylinder Clutch Lever CNC Left & Right Set ,Motorcycle Clutch Brake Lever Set for Harley Honda Yamaha Kawasaki Suzuki (Black)

  • 【Compatibility】: Handlebar brake master cylinder clutch lever Left & Right set is suitable for universal motorcycle 7/8” 22mm clutch and brake lever compatible with Eg Harley Honda Kawasaki Suzuki Yamaha can also be used..
  • 【High Quality material】: Universal Motorcycle 7/8″ 22mm handlebar brake master cylinder clutch lever is made of high quality aluminum alloy, corrosion resistance, long service life, is your ideal substitute..
  • 【Adjustable Levers】:With good restraint, motorcycle clutch brake lever set folds the lever outward to prevent accidental damage, and the non-slip surface lever gives you the perfect feel of your finger on the lever, giving you a comfortable grip..
  • 【Easy installation】: Directly replace the stock lever, without modification. Simply adjust and tighten the bolts and nuts on the adjustable motorcycle master brake levers to ensure that it gives you a good feeling of control..
  • 【After-sales guarantee】: If there is any problem with motorcycle brake and clutch lever in the process of using the brake clutch rod, please feel free to contact us..
Check Stock

Brake Clutch Levers Aluminium Mountain Bike Bicycle Cycling Brake Level Handles Lever Set 1 Pair Red

  • 【High Strength And Durable】The clutch levers is made of aluminium alloy, lightweight, high strength and durable. clutch levers is anodized, ensures the brake clutch levers will not rust and oxidize for long.
  • 【Adjustable】Lightweight and don't burden strength to your bike. By simply adjusting the set screw of the lever, the reach can be adjusted from the smallest hand to the greatest hand and provides the best clutch or brake response.
  • 【Quick Recovery】Automatic lever position restoration provides quick recovery from the crash. The beautiful shiny finish with anodized treatment improves corrosion resistance and hardness, and prevents bending and damage at the time of crash.
  • 【Feature】Light weight ,unbreakable and corrosion , Sealed Bearings on Pivot.
  • 【Good Service】This is the easiest and most power tool that can be set adjusted in minutes. If you have any questions, feel free to contact us.
Check Stock

Alloy Clutch Lever 2 Stroke Bicycle Engine Kit Replacement Part Motorized Bike

  • The Alloy Clutch Level pulls the clutch cable and clutch arm to engage your 2-stroke 48cc or 66/80cc bike engine kit motor.
  • Installation is a breeze: install the beaded end of your clutch cable in to the lever arm. Mount the lever to your handlebars and adjust your clutch cable tension as needed- now you're ready to ride.
Check Stock

CHENDGE2 Clutch Lever Fits for Suzuki DR100 1983-1990, DR200 1986-1988, DR200S 2015, DR350SE 1990-1999

  • UNBREAKABLE! The slick, foldable, and fully adjustable F2 Series levers. Made in USA.
  • FULLY ADJUSTABLE! Adjustment nut allows 2.5x more lever adjustment compared to stock levers..
  • Made with matte-finished forged aluminum, stainless steel fasteners, and bearings. 2-year unconditional warranty.
  • Standard clutch pack comes with a clutch and standard clutch mounting perch.
  • IMPORTANT! Fitment chart is in description below. The lever you receive may have a different shaped pivot piece than pictured to accommodate fitment..
Check Stock

Flying Horse 2-Stroke Motorized Bicycle Clutch Lever – Gas Bike Clutch Handle Replacement

  • DIRECT REPLACEMENT: The Flying Horse Motorized Bicycle Clutch Handle is used on most standard two stroke motorized bicycle engine kits and is used to engage and disengage your engine..
  • SPRING LOADED LOCK: This clutch lever features a spring loaded button that will lock your clutch lever in the disengaged position. That way when you choose to ride your bike with out the engine you no longer have to hold the clutch lever pulled in.
  • EASY INSTALLATION: Installation is a breeze: install the beaded end of your clutch cable in to the lever arm. Mount the lever to your handlebars and adjust your clutch cable tension as needed- now you're ready to ride.
  • UNIVERSAL FIT: Designed to work with most standard 48cc, 60cc, 66cc and 80cc 2 stroke motorized bike engines..
  • PACKAGE INCLUDES: 1x Flying Horse 2-Stroke Bicycle Clutch Clever. Color & Appearance May Vary.
Check Stock