Reviews Selected Frequency Module

QSC CP12 12-Inch Compact Powered Loudspeaker

  • 1000 Watt peak power Class-D amplifier module.
  • Easily selected contours for commonly-used applications.
  • Advanced DSP with Intrinsic correction for superior sound quality and speaker protection.
  • Directivity matched transition (DMT) for consistent frequency response across the entire coverage area.
Check Stock

Analog Voltage to PWM Signal Converter, 0-5V/0-10V Analog Input Voltage to 0-100% PWM Signal 2KHZ-20KHZ Converter Module,for PWM Motor Speed Control Interface Circuit Activity

  • Voltage to PWM Signal Converter Module: This module can convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal..
  • Wide Application: This module is widely used for PWM motor speed control interface circuit, instrumentation AD interface conversion, and other applications that need convert voltage to PWM signal..
  • PWM Signal Frequency Range: The PWM signal frequency range is 2KHZ-20KHZ, maximum is 20KHZ, default minimum is 2KHZ,Hyuduo is committed to providing customers with high-quality products and thoughtful service..
  • Setable Output Frequency: The default function of this module is converting 0-10V into 0-100% 2KHZ PWM signal, but the output frequency can be set by adjusting potentiometer as needed,stable and reliable performance, practical, easy to operate and use, has a long service life..
  • Two Kinds of PWM Signal: There are two kinds of PWM signal, PNP-PWM output and NPN-PWM output. The PNP-PWM output is only 5V level, NPN-PWM output is 5V and 24V level,If you have any problem,please contact us, we will strive to provide you with satisfactory service!.
Check Stock

RF Coax to HDMI DVI Demodulator Analog TV Tuner for NTSC System

  • ... RF output only, satellite receivers or modulated CCTV security systems. Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs..
  • Advanced RF coax TV demodulator for converting the RF coax cable TV signals into either 1080p HDMI or DVI output at 1920×1080 pixels..
  • Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. [Note]: This is an analog TV tuner so it can not be used for digital cable channels and can not accept antenna input..
  • Multiple tuner units can work together with video wall system or split-screen video processor to form a large-scale display system or display multiple TV channels on one screen at the same time. Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote controller or push buttons on the front panel. Perfect for integration with existing closed-circuit TV system..
Check Stock

2 Pieces Digital FM Transmitter Module Stereo FM Transmitter DSP PLL 76.0 -108.0MHz Stereo Frequency Modulation with LCD Display Line/USB/Mic Input, DC 3.0V - 5.0V

  • Good performance: thanks to the DSP and PLL technology, these multi-functional stereo FM transmitter modules can provide you with quality stereo.
  • Practical design: the FM transmitter module has a blue backlit LCD display, allowing you to clearly see the value in a dark environment.
  • The power consumption is extremely low, and noise interference is small.
  • Suitable for: this digital FM transmitter supports line/USB/mic channel input, its transmitting frequency range is 76.0~108.0 MHz, and the frequency response range is from 50 Hz to 18 KHz.
  • Frequency adjustment stepping is 0.1 MHz/ times when short press the key and 1.0 MHz/ times for long press.
  • Wide uses: the digital FM transmitter module can be applied to FM wireless, USB PC broadcast, maternal and child monitoring, wireless microphone and much more.
  • Warm notice: please confirm whether the power polarity and power voltage are correct before turning on the power.
  • If the input voltage exceeds 5V or the positive and negative poles of the power supply are connected reversely, it may cause permanent destroy to the module.
  • Do not touch the components on the back of the module while working, so as not to affect the normal operation of the module.
Check Stock

Agatige Frequency to Voltage Converter Module, 0-10Khz to 0-10V F/V Digital to Analog Converter Conversion Module

  • FUNCTION: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control..
  • FEATURES: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds..
  • ANTI-INTERFERENCE: Conversion module's signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence..
  • APPLICATION: Frequency to Voltage Converter Module Can be used for industrial control panel PLC or other signal interface switching.
  • MAJOR SPECIFICATIONS: Output current: 5MA,Voltage: 0-10V, Input pulse level: 5V 12V 24V, Frequency: 0 to 10KHZ..
Check Stock

CDM324 Microwave Module, 24GHz 15m Doppler Radar Smart Microwave Body Induction Module Single Channel Switch Intelligent Sensor Module

  • 【Contactless】 Non-contact detection, moving object detecting. Using Doppler radar technology, Compared with the traditional infrared feeling PIR, with the penetrating detection capability..
  • 【Wide application】 This frequency sensors module's transmitting frequency is 24GHZ, can be widely applied in business, industries, word controlling etc.This is a microwave sensor module for detecting moving objects and human body. Widely used in human body sensing lighting system, anti-theft alarm system..
  • 【Parameter】 Advanced low consumption PHEMT oscillator, Provide various frequency range standards: -UK,-F,Operating Temperature:-20~60℃..
  • 【Independence】Independent transmitting and receiving route, can get the big gain. The module has many advantages such as high sensitivity, long sensing distance, wide sensing angle, high reliability, wide range of operating voltage..
  • 【High performance】 Single channel operation. High sensibility, high flexibility, low cost, operating distance is 15m. Not influenced by temperature, humidity, noise, air flow, dust, ray etc, adaptive to terr....
Check Stock

PC Interface Controller

  • 【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
  • Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
  • Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
  • (current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
  • When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
Check Stock

Logitech USB Unifying Receiver - 2 Pack

  • Applications: This device can be wildly used to wireless remote control,wireless audio,somatosensory devices, RFID, NFC, smart grid, smart home, etc..
  • NRF24L01 Wireless Transceiver Module with 125 Communications channels, multi-point communication and frequency hopping to meet the communication....
  • NRF24L01 wireless transceiver module built-in 2.4GHz antenna, small size, 15x29mm (including antenna).
  • it can be directly connected to a variety of....
  • The operating voltage of the wireless module is generally 3.3v, while the ordinary 51 microcontroller is 5v. This module is convenient to shop....
  • NRF24L01 Socket Breakout Adapter with NRF24L01 Wireless Transceiver Module.
Check Stock

AllAboutAdapters RF Coax to HDMI VGA Component YPbPr Video Demodulator TV Tuner for NTSC System

  • Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems. Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants. Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Backward compatible with all DVI equipments via using HDMI to DVI adapter..
  • Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details..
  • Multiple of these RF demodulator/tuner units can work together with video wall system or split-screen video processor to form a large-scale display system or display multiple TV channels on one screen at the same time Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote controller or push buttons on the front p....
Check Stock

Audio-Technica Instrument Condenser Microphone (ATM350U)

  • you want it – the gooseneck won’t flop around no matter how aggressively you move the instrument as you play. The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case. Features: Low-profile mic design for minimum visibility Crisp, clear, well-balanced microphone response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Unmount universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone Rugged Unmount 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise Interchangeable elements available for hyper cardioid and omnidirectional polar patterns Included violin mount with hook-and-loop fastener provides an additional mounting option Specifications: Element: Fixed-charge back plate, p....
Check Stock

High Frequency Transducer, Bandwidth Mixing Board Mixer Module -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • 【Important Data】: SSB noise figure (NF) of 9.75 dB--Input IP3: 28.5 dBm--Input P1dB: 13.3 dBm--Typical LO drive: 0 dBm--Power conversion gain of 1.8 dB.
  • 【Wild Used】: This 5V double balance up and down frequency mixer module is widely used for cellular base station receivers, Radio link down converters, Broadband block conversion, Instrumentation.
  • 【Low Power】: Our 130mA 50 Ohms Balun coil coupling frequency conversion mixer features adjustable bias for low power operation, so you can trust and use this RF mixer inverter with confidence.
  • 【Wonderful Components】: This 5V ADL5801 double balance up and down frequency mixer module is equipped with exposed paddle, 4mm x 4mm, 24-lead LFCSP package, so it will be an ideal choice for you.
  • 【Size】: Power supply: DC+5V@80mA(anti-reverse connection protection.)--RF_IN/RF_LO input frequency range: 10-6000Mhz--Input and output impedance: 50 ohm--Type:Input Balun coupling, Input/output Balun coupling(Optional)--Weight: Approx.15g/0.5oz.
Check Stock

RF Oscillator Module, VCO 515MHz-1150MHz Voltage Controlled RF Oscillator Frequency Source Broadband Oscillator Module

  • [Strong compatibility]:For Yaesu FT-817/857/897 and other models for temperature-compensated crystal components, fully compatible with the original TCXO-9..
  • [High stability]:he frequency is 22.625MHz, which can improve the stability of the machine after replacing the original crystal. It is superior to the original module in different environments..
  • [High cost performance]:The price is only 15% of the original module, and the cost performance is extremely high..
  • [Effect is remarkable]:Actual test the frequency of the crystal is observed with a high-precision frequency meter. The original crystal frequency is deflected with a fire-baked , but this temperature-compensated crystal has no obvious change, and the effect is remarkable..
  • [Simple operation]:Turn off the power of the machine, open the cover of the machine, find the position where the temperature compensation crystal is installed. You need to unplug the ordinary crystal of the machine, then insert it according to the stitching of the machine. After installation, you can start using it without any settings..
Check Stock

EMB Professional EBX9Series Sound System Digital Crossover with XLR Input and Output for Home, DJ Performance, Club, Studio, Stage, Show, Entertainment

  • Stereo half-frequency, single-channel third-frequency electronic crossover. Trs or XLR balanced input and output Differential. Choice of stereo or the sum of left and right channels while the synthesis of ultra-low sound. Two channels are selected Xiao range switch. Two channels have 40Hz high pass filter (frequency cut End). all outputs with phase reverse switch.
  • Technical parameters: TRS or XLR balanced input and output Differential/ choice of stereo or the sum of the synthesis of left and right channel subwoofer.
  • The scope of the two-channel selection switches are x 10 two channels have 40Hz high pass filter (frequency cut End).
  • Therefore, the output spectrum can be independently adjusted average dB/ Oct linkwttz-riley filters (the professional standard). stereo/ mono status indication Leo lights, indicate the selected Mode of operation.
  • 24dB/Oct linkwitz-riiey filters (the professional standard) stereo/ mono status indication Leo lights, indicate the selected Mode of operation.
Check Stock