Reviews Selectable Parameters

SeedRanch Falcon IV Turf Type Tall Fescue Grass Seeds - 50 lbs.

  • Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
  • General uses includes growing tent and reservoir.
  • Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
  • This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
  • High and low alarm when outside parameters, selectable units include TDS, EC, ppm 500, ppm 700 and CF.
  • Lab quality glass pH probe with easy two point calibration.
  • Conductivity / temperature probe comes factory calibrated so it's ready to be used.
  • Double junction probe is more accurate than test strips and drops.
  • Combine with Bluelab pen and meter for full garden nutrients monitoring in water and soil.
  • Other features: International power supply, water resistant design.
  • KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit is sold separately.
  • Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
  • 2-Year Limited Warranty with proof of purch....
Check Stock

B&K Precision 880 100 kHz Handheld LCR Meter, Blue

  • 40,000 counts resolution on primary and 10,000 counts resolution on secondary display.
  • L, C, R, and Z (879B & 880 only) primary measurements.
  • Automatic calculation of secondary parameters D, Q, Theta, ESR (Theta/ESR for 879B &880 only), and DCR (880 only).
  • Accuracy up to 0.1% and selectable test frequencies up to 100 kHz (880 only).
  • Fast auto range design for rapid, easy component measurements.
Check Stock

pH Meter, 3-in-1 TDS Temp pH Tester 0.01 High Precision Water Quality Tester, pH Measurement Range with 0-14, Digital pH Meter for Household Drinking, Pool and Aquarium

  • Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
  • General uses includes growing tent and reservoir.
  • Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
  • This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
  • High and low alarm when outside parameters, selectable units include TDS, EC, ppm 500, ppm 700 and CF.
  • Lab quality glass pH probe with easy two point calibration.
  • Conductivity / temperature probe comes factory calibrated so it's ready to be used.
  • Double junction probe is more accurate than test strips and drops.
  • Combine with Bluelab pen and meter for full garden nutrients monitoring in water and soil.
  • Other features: International power supply, water resistant design.
  • KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit is sold separately.
  • Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
  • 2-Year Limited Warranty with proof of purchase (6-month warranty for pH probe).
Check Stock

Bluelab MONGUA Guardian Monitor for pH, Temperature, and Conductivity (TDS) Measurements in Water with Easy Calibration, 3 in 1 Digital Nutrient Meter for Hydroponic System and Indoor Plant Grow White

  • Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
  • General uses includes growing tent and reservoir.
  • Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
  • This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
  • High and low alarm when outside parameters, selectable units include TDS, EC, ppm 500, ppm 700 and CF.
  • Lab quality glass pH probe with easy two point calibration.
  • Conductivity / temperature probe comes factory calibrated so it's ready to be used.
  • Double junction probe is more accurate than test strips and drops.
  • Combine with Bluelab pen and meter for full garden nutrients monitoring in water and soil.
  • Other features: International power supply, water resistant design.
  • KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit is sold separately.
  • Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
  • 2-Year Limited Warranty with proof of purchase (6-month warranty for pH probe).
Check Stock

Pro Machine Kit - Jconly SOLAR Rotary Machine Kit for Artists

  • ...ss Motor Maximum working power supply 10V, speed: 10000 rpm. The needle springs back, the stroke can reach 3.5..
  • Power Supply Parameters - This tattoo power supply LCD display built in magnet for easy mount on metal surface. The ultra bright digital LED screen display makes easier to read accurate readout.0-18V user selectable voltage, user-friendly Easy voltage adjustment, and change voltage. Perfectly used for tattoo beginners or professional tattoo artists..
  • Upgraded Version Cartridge Needles - 100% EO gas sterilized and individually packaged.The frame is made of medical grade PC polycarbonate，colorless, transparent, heat resistant, impact resistant, flame retardant, BI grade。There is four special elastics hold on rebound that lighten the pressure of the needle bar, The Tattoo Cartridge Needles are made of precise mold，working silence.The low profile size makes the ink flow better. It works with almost all kinds of tattoo machines..
Check Stock

Rockville SingMix 45 1000w Powered Karaoke Mixer Amplifier w/Bluetooth/USB/Echo

  • 500 x 2 Peak @ 4 Ohm. 150 x 2 RMS @ 4 Ohm. 100 x 2 RMS @ 8 Ohm. A and B parallel speaker outputs supports (4) 8 ohm speakers or (2) 8 ohm speakers or....
  • USB input will play music files from a thumb drive or hard drive (32gb max). SD card playback will play music files stored on a memory card (32gb....
  • Full controls over echo effects: volume, 2 band echo EQ, repeat, and delay parameters. Selectable mono/stereo echo effect. Dual 7 band master EQ....
  • Remote control for USB/SD playback and Bluetooth Full function. Built in pre-amplifier. Built in quiet cooling fan. Digital VFD display. Perfect for....
  • Precision tuning with high quality professional potentiometers and knobs. 115V/230V switchable for worldwide use. Unit weight: 14 lbs (6.35). Shipping....
Check Stock

YUSHI YUT2600 Portable Digital Ultrasonic Flaw Detector w/one straight beam probe and one angle beam probe, Varies Probe/Transducer options available, Data Logger

  • Perfect DAC curve function, Flaw Positioning, Flaw Quantify.
  • Echo-Echo thickness measurement, Auto Gain, Full screen function, Real-time clock, Afferent echo/echo loss alarming, Hollow/Solid waveform, Digital Reject, etc.
  • Two independent measurement gates, selectable measuring point of wave peak or front distance.
  • Up to 1000 data sets can be stored, including waveforms, curves and parameters, etc.
  • Wave peak memory: capture and memorize real time peak signal amplitude, contributed to precise positioning and fast search.
Check Stock

Mahr Federal 2191800 Pocket Surf IV Portable Surface Roughness Gage EGH-1019, 10 μm Radius, 9V Battery, LCD Display, PMD-190101 Specimen, Includes Test Certificate,Red/Gray

  • Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces.
  • One measurement allows for user to view any one of the four, switch-selectable, parameters: Ra, Rmax/Ry, Rz.
  • Out-of-range (High or Low) and "battery low" signals are also displayed.
  • Our switchable probe positions - axial (folded) or at 90°, 180° or 270°.
  • MarConnect data output for easy SPC-processing that is compatible with the most common data processing systems.
Check Stock

Portable Turbidimeter Turbidity Meter Kit Turbidity Tester with Vials Range 0~1100 NTU/FNU 0~275 EBC 0~9999 ASBC

  • ★Easy-to-use portable turbidity meter comes with a standard carrying case. 2 to 5 points push-button calibration using the Formazin Standards..
  • ★Selectable 4 turbidity units, including the NTU, FNU, EBC and ASBC. Single measurement mode automatically recognizes and holds the stable reading..
  • ★Continuous measurement mode can be used for indexing or matching the sample vials. Auto-Power Off effectively conserves battery life..
  • ★Setup menu allows setting the 7 parameters, including the number of calibration points, resolution, date and time, etc. Reset feature automatically resumes all settings back to factory default options..
  • ★Expanded memory stores and recalls up to 100 data sets. Stored data can be transferred into computer by USB communication interface. Multi-mode power scheme (battery, power adapter or USB port) ensures that use the meter smoothly..
Check Stock

Bluelab MONGUACONIN Guardian Monitor Connect In-line for pH, Temperature, and Conductivity Measures, Easy Calibration and Data Logging (Connect Stick not Included)

  • Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
  • General uses includes growing tent and reservoir.
  • Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
  • This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
  • High and low alarm when outside parameters.
  • Data logging with Bluelab Connect software.
  • Lab quality glass pH probe with easy two point calibration.
  • Conductivity / temperature probe comes factory calibrated so it's ready to be used.
  • Double junction probe is more accurate than test strips and drops.
  • Combine with Bluelab pen and meter for full garden nutrients monitoring in soil.
  • Other features: International power supply, water resistant design.
  • KIT INCLUDES: Calibration solution and inline probes, probe care kit and connect stick sold separately.
  • Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
  • 2-Year Limited Warranty with proof of purchase (6-month warranty for pH probe).
Check Stock

Baofeng UV-5R Two Way Radio Dual Band 144-148/420-450Mhz Walkie Talkie 1800mAh Li-ion Battery(Black)

  • Frequency Range: 144-148MHz, 420-450MHz. Please kindly know that UV-5R would not transmit without this frequency range..
  • 128 Channels 50 CTCSS and 104 CDCSS Dual-Band Display, Dual Freq. Display, Dual-Standby, A/B band independent operation, High/Low TX power selectable: Busy channel lock-out(BCLO).
  • High/Low TX power selectable: Busy channel lock-out(BCLO),128 Channels 50 CTCSS and 104 CDCSS Dual-Band Display, Dual Freq. Display, Dual-Standby, A/B band independent operation, Keypad Lock. Voice companding: 50 CTCSS/ 104 DCS coder & tone searching, Tri-color background light selectable: 0-9 grades VOX selectable. Large LCD Display, Emergency Alert: 12.5KHz Switchable, LED Flashlight: High/Low RF Power Switchable, Support manually program. Easy to program via PC. Support CHIRP quick programming.
  • Tri-color background light selectable: 0-9 grades VOX selectable. Large LCD Display.
  • Emergency Alert: 25KHz/12. 5KHz Switchable, LED Flashlight: Hight /Low RF Power Switchable.
Check Stock

Bluelab MONGUACON Guardian Monitor Connect for pH, Temperature, and TDS in Water with Data Logging (Connect Stick not Included), Nutrient Meter for Hydroponic System and Indoor Plant Grow

  • Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
  • General uses includes growing tent and reservoir.
  • Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
  • This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
  • High and low alarm when outside parameters, data logging with Bluelab Connect software.
  • Lab quality glass pH probe with easy two pointcalibration.
  • Conductivity / temperature probe comes factory calibrated so it's ready to be used.
  • Double junction probe is more accurate than test strips and drops.
  • Combine with Bluelab pen and meter for full garden nutrients monitoring in soil.
  • Other features: International power supply, water resistant design.
  • KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit and connect stick sold separately.
  • Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
  • 2-Year Limited Warranty with proof of purchase (6-month warranty for pH probe).
Check Stock

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

  • NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
  • Support up to six channels of data reception.
  • the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
  • Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.
Check Stock