Reviews Seamless Pipes Welded Tubes

Exhaust Headers Manifold 1-5/8 in. Mild Steel for 2002-2013 Silverado Sierra Suburban Tahoe Yukon Escalade 4.8L 5.3L 6.0L 6.2L V8

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) cold roll flash mild steel.
  • Head flange laser-cut from 3/8-inch (9.5mm) thick steel plates and flattened by hydraulic press.
  • All joints TIG welded for great resistance against cracking and wearing.
  • Hi-temp paint that holds up to 500C or 932F.
Check Stock

STRUT 3/4\ CONDUIT CLAMP by UNISTRUT MfrPartNo RP1212EG

  • QUALITY AND DURABILITY – These 3/4-inch snap-on conduit straps are crafted from galvanized steel with a zinc coating that forms a protective layer. With its reinforced rib, this EMT one-hole pipe strap provides extra strength and durability..
  • EASY INSTALLATION – These one-hole design snap-on conduit straps are extremely simple to use. Simply snap the strap onto your conduit and use a screw to secure it onto any surface. They are perfect for both indoor and outdoor applications..
  • ACCURATE SIZES – Our Snap-On conduit straps are available in many sizes to fit many different pipes, cables, hoses, and tubes. Choose from a selection of 1/2 Inch, 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch, and 2 Inch sizes..
  • VERSATILE – These snap-on straps can be used for a wide variety of tubes or pipes that range anywhere between EMT conduits to pipes, tubes, cables, and hoses..
  • WHY CHOOSE AIRMONT PRODUCTS? ABOUT US - Airmont Products manufactures a fine line of top-quality electrical supplies. Our EMT snap-on pipe straps are especially recognized as being durable, versatile, and easy to install. Customer satisfaction is our priority. Let us know how you liked this product!.
Check Stock

POWERGO MOTORSPORT 1152403820 1-1/2 x 2-5/8 inches 304 Stainless Steel Shorty Headers for C1500 C2500 K1500 K2500 Suburban Blazer Jimmy Tahoe Yukon | 5.0 5.7 305 350 V8

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM, which brings excitement to street driving and is ideal for street racing.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel.
  • Head flange laser-cut from 7/16 in. (11.5mm) thick steel plates and flattened by hydraulic press.
  • Polished surface for extra resistance against rusting.
  • all joints TIG welded for great resistance against cracking and wearing.
Check Stock

Long Drain Brush Flexible Feeding Tube Brush Slim Cleaning Brush Hose Pipe Brush

  • Super flexible long brush, work for curved pipes/ tubes that angled less than 90 degrees.
  • Works great at cleaning around the hard-to-reach narrow pipes/ tubes.
  • Stainless steel material, durable nylon rotating bristles with scratch free head.
  • 160cm Long with 5CM X 1CM Diameter Bristle Head.
Check Stock

PSW TRADE SUPPLIERS LTD Plastic Pipe Cutter for 1-5/8-inch Plastic Pipe, PVC, Rubber Hose

  • Plastic pipes and tubes pipe-cutting tool for pipes 1-5/8 inches in diameter.
  • Pipe cutter with the rubberised handles for non-slip, secure handling and a safety lock lever to protect it from unauthorised use by children.
  • Automatic, controlled opening of blade at the release of lever lock. The spring-loaded ratchet wheel remains in place, preventing the cutters from closing.
  • The thick and sharp blade is made of high-quality stainless steel, with high hardness and high shear force and spring loaded ratcheting wheel.
  • Suitable for all types of plastic pipes and tubes including PVC, PPR, PEX pipe, PE and rubber hose.
Check Stock

Exhaust Headers 1-1/2 in. 304 Stainless Steel Polished Finish for 88-95 C1500 C2500 K1500 K2500 Silverado Sierra 92-95 Suburban Blazer Jimmy Tahoe Yukon 305 350 cu. in. 5.0L 5.7L

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel.
  • Head flange laser-cut from 7/16-inch (11.5mm) thick steel plates and flattened by hydraulic press.
  • All joints TIG welded for great resistance against cracking and wearing.
  • Polished surface for extra resistance against rusting.
Check Stock

uxcell 4Pcs 6063 Seamless Aluminum Round Straight Tubing Tube 1 Feet Length 0.234 Inches ID 0.312 Inches OD

  • The aluminium tube is commonly used for frames, boat building, gardening products, general fabrications and shop fitting,DIY aircrafts or other remote control models..
  • Aluminum Round Tubes are available in alloys 6063 offering better corrosion resistance and weldability than other Aluminum Round Tub.
  • The interior is smooth with no seam and is available in an extruded structural or a drawn seamless aluminum round tube for higher precision applications..
  • It can be easily cut and drilled, and can be welded with the right equipment..
  • Different size aluminum tubing for your needs. Please check it right before purchasing..
Check Stock

Waters Tube Puzzle - Connect The Pipes Free Puzzle

  • ★ Waters Pipes Puzzle :250 puzzle line to solve.
  • ★ Connect The Pipes :5 levels :easy tube puzzle - medium connect tube puzzle - advanced logic pipe links -hard links water tube puzzle - expert....
  • ★ Waters Pipes Puzzle :Nice graphics and sounds of pip.
  • ★ Connect The tubes :Hint system to help solve puzzle of water tube connect.
  • play it now and show to your friends how smart you are and challenge them to solve pipes problem links.make water pipeline..
Check Stock

ABN Exhaust Pipe Cutter Tool - 3/4 to 3 Inch Exhaust and Tailpipe Cutter Chain Exhaust Cutter Tool Muffler Pipe Cutter

  • CUT PIPES EASILY: Quickly remove old exhaust pipes with the ABN Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness.
  • ACCESS HARD TO REACH AREAS: 10 inch (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts.
  • DURABLE CUTTING BLADES: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels.
  • EASY TO USE: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • COMFORTABLE GRIP: 9.3 inch (23.6cm) exhaust pipe cutting tool has 3.8 inch (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security.
Check Stock

John Guest Acetal Copolymer Barbed Tube Fitting, Stem, 3/8\ Stem OD x 3/8\ Hose ID (Pack of 10)

  • Stem fitting for connecting pipes or tubes in a straight line.
  • Stem fitting inserts into tubing to connect pipes or tubes with different ends.
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance.
Check Stock

John Guest Acetal Copolymer Barbed Tube Fitting Stem 1/2 Stem OD x 1/2 Hose ID Pack of 10

  • Stem fitting for connecting pipes or tubes in a straight line.
  • Stem fitting inserts into tubing to connect pipes or tubes with different ends.
  • Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
  • Meets NSF/ANSI standards 14, 51, and 61 for quality assurance.
Check Stock

Jaws of Life: Stories

  • Mainly used for cutting of soft and hard copper, aluminum, brass, plastic tubes, thin-walled stainless steel pipes and other thin pipes or tubes. Please note not suitable for bike seat or bike handlebar cutting, only for soft or thickness wall ≤3.8 mm tube.
  • Spurtar Pipe Cutter is a Must have Steel Cutting tool for every plumbers, electricians, vehicle mechanics, homeworkers for hobby or proffesional work.
  • The tube cutter has a sturdy, lightweight slide, wheel housing and large knurled screw knob for easy control of cutting pressure for clean cuts..
  • Metal pipe cutting tool with adjustable cutting capacity range between 3mm to 28mm (1/8 inch to 1-1/8 inch).
  • Anti-scratch electrostatic powder coating reduces the effects of static electricity during use, resistant to corrosion and rust..
Check Stock

BTSHUB Exhaust Pipe Cutter Tool, 3/4' - 3' Universal Exhaust Tailpipe Tube Cutting Pliers with 15 Blades for On- and Off-Vehicle Use

  • High-Efficiency Pipe Cutter: Quickly remove old exhaust pipes with the Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness. Suitable for mild steel, galvanized steel, copper, and aluminum pipes.
  • Unique Design: 10 inches (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. There is a cutting wheel on each roller for smooth tracking..
  • High-Quality Blades: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels, only a 1/4 inch rotation is needed for a complete cut..
  • Easy to Use: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • Comfortable Grip: 9.3 inches (23.6cm) exhaust pipe cutting tool has 3.8 inches (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security..
Check Stock