Reviews Seamless Line Pipe

IEason,Men Stainless Steel Watch Analog Quartz Movement Wrist Watches Silver B

  • Insulated copper coil line set is made in USA..
  • The 16 Ft. line set is insulated high quality copper tubing. Seamless pure copper pipe shows no leaks, which is divided into 1/4" low and 1/2" high....
  • With embossed polyethyene film, climate resistant foam, and 3/8 inch thickened insulated cotton, this three-layer insulated mini split copper line set....
  • The insulated copper twin line set has been successfully tested by Method ASTM G154. No cracking at low temperature of -40 ° F, no deformation at....
  • Package Include: insulated line set*1, wall sleeve cylinder*1, decorative wall cap*1, wall filler putty*1, non-adhesive decorative wrapping tape*1,....
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

Car Hose Removal Plier Tool, Fuel Vacuum Tube Pliers Hose Removal Tool, Fuel and Vacuum Line Remover Separator Pliers Pipe Repairing Tool

  • Hose Removal: This line and pipe separator pliers is mainly used to remove stubborn hoses on heater water tanks, radiators, pumps, air filters, etc..
  • Durable Material: This line and pipe separator pliers are made of steel, sturdy and durable, not easy to damage.
  • Strong Practicability: This line pipe separator pliers has a compact design and strong practicability.
  • Comfortable Handle: This line pipe separator pliers is designed according to ergonomic principles, and the rubber-coated handle is labor-saving and comfortable to use.
  • Applicable Size: This line and pipe separator is suitable for removing fuel, vacuum or heater hoses with a diameter of 5/32 inches to 1/2 inches (4mm to 14mm).
Check Stock

SUNGATOR 3/4 Inch Check Valve No Lead Brass Push to Connect Plumbing Fittings to Connect PEX Copper CPVC PE-RT With A Disconnect Clip Pack of 6

  • 【APPROVED TO USE】: Certified and listed to ASSE 1061, NSF/ANSI 61.
  • Meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution..
  • 【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with brass push-to-connect fittings and ease of use reduces installation errors as they completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms.
  • Just push and lock the pipe to get the seamless performance..
  • 【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, they are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe..
  • 【LONG LASTING】: Made of high-quality brass that is an abrasion resistant material for use in prevention and protection of fittings against corrosion, scratches, dulling and other damage after use. It is a perfect material for pipe fitting system as it can withstand rated up to 200 °F and 200 PSI and long period of wear and tear..
  • 【BUNDLE INCLUDES】: 3/4 Inch Check Valve (6 PCS).
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 5/16\ 3.3ft Blue for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 5/16-inch(5mm x 8mm)(ID. x OD.), 1/16-inch(1.5mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 3/8\ 3.3ft Yellow for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 3/8-inch(4.5mm x 9.3mm)(ID. x OD.), 3/32-inch(2.4mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

RIDGID 19238 NaviTrack Scout Locator, Underground Pipe Locator and Underground Cable Location Device & 16728 Remote Transmitter (512 Hertz Sonde) for Underground Pipe Location,Red/Black,Small

  • Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
  • Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
  • Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
  • Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
  • Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
  • Product 2: Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
  • Product 2: Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
  • Product 2: Meets FCC Class B and EN 55022 Class B requirements.
  • Product 2: Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
Check Stock

MECCANIXITY PVC Petrol Fuel Line Hose 3/16 x 5/16 16ft Pink for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for....
  • Fuel line hose, is in size of : 5mm/0.2-inch inner dia, 8mm/0.31-inch outer dia, 1.5mm/0.06-inch wall thickness, 5m/16ft total length.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment.....
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

Genuine OEM Engine Coolant Thermostat Kit For BMW E60 E61 E82 E83 E85 E86 E88 E89 E90 E91 E92 E93 F30 1 3 5 X Z Series 3.0L L6

  • Fit for: BMW E46 E39 E36 E85 Z3 Z4 320i 323i 325i 328i 330i 525i 528i 530i. More detailed compatibilities please see Product Description..
  • A leaking heater pipe line is not only aA coolant pipe is a hard plastic line used to transport coolant between cooling system components. It is usually attached on both ends by coolant hoses, and the coolant pipe can, in some cases, act as a junction to split coolant to other parts. Often, a coolant pipe may be connected between the radiator and water pump, or between the water pump and the heater core..
  • A leaking heater pipe line is not only a waste of engine heat but also a cause of engine damage. Together with the heater hoses, this pipe line is where heated coolant passes through to eventually warm your cabin during winter months. If this pipe or tube is damaged, your coolant level will deplete quickly, thus resulting to heater malfunction and a steaming engine..
  • Please be sure to compare carefully with Pictures or OE number before buying items. If you are not sure t....
Check Stock

Mofun 12" Rise Ape Hangers 1.5" Fat Bars 1" Clamp Handlebars Fits for Harley Softail Dyna Sportster XL 883 1200 1998-2013 Road Glide 1994-2023 Road King Gloss Black

  • 【Fitments】:Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-up Road King Model & 1998-2013 Road Glide.**Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide** **Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers**Can not fit model with 1.25 Handlebar Clamp below.You can ask customer service for more detail information of motorcycle model..
  • 【Specifications】:Bar Diameter: 1.5 inch Fat Bar.Center Width: 11.75 inch, Clamp Area Width: 5.4 inch & Diameter: 1 inch.Grip Area Bar Diameter: 1 inch.End Rise: 12 inch.Overall Width: 35 inch.Pullback/Sweep: 8 inch..
  • 【High Quality】:Material: Seamless steel line pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market)Finish: Powder Coated Black(Copper+Nickle+Black),High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral..
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock