Reviews Seamless Butt welded Pipe Fittings

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

  • EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
  • GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
  • a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
  • SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....
Check Stock

Emoshayoga Coffee Filter Basket Durable Filter Basket Strainer Stainless Steel Filter Basket Coffee for Pressure Coffee Machine

  • PVC for corrosion resistance and less weight than fittings made from metals.
  • Basket strainer pipe fitting for adding filtration to a pipe line.
  • Socket weld connection option to allow a smooth bore and better fluid flow, and a female threaded option for connecting to male threaded pipe fittings.
  • Meets NSF/ANSI 61 standards for potable water use.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Forney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Forney 32110 E7014 Welding Rod, 1/8-Inch, 10-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock

LTI 2.75 inch Butt Joint Exhaust Band Clamp 304 Stainless Steel for 2.75 OD to 2.75 OD Exhaust Pipe Connection 2.75 Inch

  • LTI 3" Length exhaust clamp is Made in Full 304 Stainless Steel Over 100 hours salt spray test to ensure the great performance in anti-corrosion.
  • Universal fitment Butt Joins 2.75" OD Pipe to 2.75" OD Pipe, we also provide many different sizes to fulfill your needs. Full clamping area to create....
  • The butt joint clamps are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back....
  • No welding design makes lap joint clamp fast, easy and accurate installation. it is removable and reusable, easy to install without welding.
  • LTI provide 12 months warranty from the date of purchased. We value your shopping experience and strive to offer a high-quality product and service.....
Check Stock

TINVHY Hydraulic Copper Tube Crimper Copper Pipe Fittings Crimping and Plumbing Tool Crimping Tool with Crimping Dies Jaw 1/2, 3/4, 1Inch

  • Changeable Crimping Jaws 1/2, 3/4, 1. With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair.
  • Humanized Design - With this powerful crimper, you can crimp wires and butt connectors easily. Offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds.
  • Material - The head of crimper is made of durable steel with stainless steel coating, strength and good toughness.
  • Easy to Carry - The item comes with a durable yellow plastic box, which makes it portable to carry and compact to store.
  • Replacement for Viega Copper, Elkhart, Conex Pipe Fittings. The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves.
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock