Reviews Sea Water Condenser

220V 50HZ 0-150rpm High Performance Lab/Industry Distillation Purification Rotary Evaporator Rotavapor SENCO Equipment w/Motor Lift, Digital Heating Bath, Condenser Full Set of Glassware Kits RE-52CS

  • Manifold for holding solvent recovery condensers.
  • Flow meter and rigid supply tube for condenser water supply.
  • Condenser water supply/drain manifold connects to a bench cold-water tap, or a refrigerated water chiller for improved control of condenser temperature and water conservation.
  • Parallel water supply/drain manifolds with quick disconnect tube fittings.
Check Stock

Laboy Glass West Condenser Liebig Reflux Distillation Column with 24/40 Joints 190mm in Jacket Length Organic Chemistry Lab Glassware with 10mm Glass Hose Connections

  • HIGHER COOLING PERFORMANCE-----A West condenser is a thinner version of the Liebig condenser,with narrow annular space that allows for the increased flow rate of water to provide high cooling efficiency.It consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket from bottom to top to condensate the vapor in the inner tube. The fused-on narrower coolant jacket may render more efficient cooling with respect to coolant consumption..
  • WIDELY USED-----A west condenser can be both used in a reflux and a distillation apparatus .In the reflux apparatus, just as the graham condenser,Dimroth condenser,coiled condenser,liebig condenser does,it works with round bottom flask, drying tube,separatory funnel or additional funnel.In the distillation apparatus,it used to condense the vapr into liquid and drip to a receiving flask with a take-off adapter..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connections connecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With a jacket lenght of 190mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass acc....
Check Stock

Laboy Glass Allihn Condenser Reflux for Soxhlet Extractor with 55/50 Joint 300mm in Jacket Length 405mm Overall Height Distillation Apparatus Organic Chemistry Lab Glassware

  • This is a special allihn condenser only with 34/45 bottom male joint inserting to a soxhlet extractor body ,the size is larger with an inner tube consisting of a series of bulbs which increase the surface area availiable for vapor condensation surrounded by an outer jacket tube.This design can improve the cooling performance,in practise, the allihn condenser can be replaced by a liebig condenser, coiled condenser,dirmoth condenser or graham condenser used as a reflux condenser..
  • In a soxhlet extraction apparatus, this allihn condenser with lower male joint attached the soxhlet extractor body cools the solvent vapour from the boiling flask and drips back down into the thimble containing the solid material. With 10mm O.D.hose connections at top and bottom accommodating 8mm I.D.rubber tubing,the cool water flows in from the lower hose ,and flows out from the upper hose..
  • The glass allihn condenser is with 55/50 male joint, 300mm in jacket length 405mn overall height.
  • Laboy glass ware are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • 100% 90 DAY MONEY BACK GUARANTEE If you are not satisfied for any reason, simply return for a fu....
Check Stock

The Distillery

  • Sufficient Capacity: Alcohol still machine owns 9. 6 us gal real capacity, able to distill 38 liters of raw material by heating to selectively boil and then cooling to condense the vapor. Boiler barrel: 13. 8" X 15. 7" (35 x 40 cm). condenser: 7. 9" X 5" (20 x 13 cm). thumper: 7" X 4. 3" (18 x 11 cm). all parts are made of food grade material including silicone, stainless steel and copper..
  • Speedy Cooling: This water Distiller adopts open-type cooling method, copper coils with rapid thermal conductivity assures promising cooling performance together with large contact area with the coolant, providing a rather low temperature of distilled product. Upgraded with two kegs (thumper and condenser), perfect for adding flavors to your product! Circulating water pump attached to save cooling water. Rubber pads under condenser insulates heat and quickens cooling..
  • Convenient Usage: Precise thermometer with double display of Celsius and Fahrenheit on the lid for easy monitoring of wine temperature during distillation process. Circulating water enters through lower inlet and drains from upper outlet for efficient cooling..
Check Stock

Fieldpiece MR45 Recovery Machine

  • Micro channel CONDENSER/Compresses more refrigerant at twice the RPMs (3, 300) and twice the horsepower (1HP).
  • Twin cylinder compressor (oil-less)/water resistance to withstand direct rain.
  • Ceramic cylinder for longer life and less friction.
  • Micro Channel Condenser/compresses More Refrigerant At Twice The Rpms (3, 300) And Twice The Horsepower (1hp).
  • Twin Cylinder Compressor (oil-less)/water Resistance To Withstand Direct Rain.
Check Stock

DADAKEWIN 400mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 400mm/24 * 40)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/40, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 500mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 500mm/24 * 40)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 29/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 500mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 500mm/24 * 29)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 300mm/24 * 29)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 24/40, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Color : 300mm/24 * 40)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 24/40, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 400mm Friedrich Condenser, Joint 24/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 400mm/24 * 29)

  • Packing: 1 piece/pack, 400mm Friedrich Condenser, Joint 24/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 29/29, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 300mm/29 * 2)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 29/29, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock

DADAKEWIN 300mm Friedrich Condenser, Joint 19/19, Borosilicate 3.3 Glass Standard Ground Mouth Heat Resistant Heavy Duty Scientific Lab Condensers- Pack of 1 (Size : 300mm/19 * 2)

  • Packing: 1 piece/pack, 300mm Friedrich Condenser, Joint 19/19, Standard Ground Mouth.
  • Heavy duty design, reusable, ground glass joints allow precision connection to jointed glassware..
  • Premium Materials: Lab Friedrich Condenser is made from Borosilicate 3.3 Glass materials, which has a very low coefficient of thermal expansion, about one-third of ordinary glass. Resistant to high temperature and Resistant to 200 ° C temperature change..
  • Friedrich Condenser's inner core tube is a water condenser which two glass tubes are tightly intertwined into a spiral, which increases the length of the inner core tube and expands the cooling area. the steam is passed through the outside of the inner tube, which is not only cooled by water, but also by natural air. the cooling effect is better, and it is suitable for backflow..
  • Great for Professional Laboratories, Classrooms & Household.
  • Superior chemical durability and heat tolerance. Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use..
Check Stock