Reviews Scribing Tooreview

Trend EasyScribe Scribing Tool - Versatile and Accurate Scribing Solution for Carpenters, Joiners, Tilers, Kitchen and Shop Fitters, E/SCRIBE

  • VERSATILE SCRIBING TOOL: Ideal to scribe worktops, end panels, walls, shelves, alcoves, skirtings, plinths, floors, fitting tiles, and more with the fast, single-handed adjustments.
  • ACCURATE AND DETAILED: Built-in and replaceable 0.7mm thick 2H Grade flat lead for a fine line that is easy to follow leaves a perfect fit.
  • Extendable steel guide plate helps stay parallel to the scribing surface for increased accuracy.
  • WORKS WITH NARROW GAPS: Steel guide can also extend up to 50mm, allowing it to project beyond the lead and into narrow gaps to gain the perfect fit.
  • Ideal for fitting doors to linings and frames where a fine parallel gap is needed.
  • NOT JUST FOR SCRIBING: Wide guide plate allows the EasyScribe to track against an edge to strike consistent parallel lines, ideal for gauge work where a specific backset is needed such as an architrave quirk.
Check Stock

Swanson Tool Co S0107

  • Heavy gauge aluminum alloy with matte finish to prevent glare.
  • 1/4 in. and 1/2 in. spaced notches to facilitate scribing lines.
  • Great for deck framing and stairway building!Description7 tools in one: framing square, try square, miter square, protractor, saw guide, with layout bar stair guide to determine out-of-square corners. 1/4quot.
  • spaced notches to facilitate scribing lines. Black filled markings with layout bar and blue book.
Check Stock

Mitutoyo 188-121, Screw Pitch Gage, 0.4mm to 7mm, 18 Leaves

  • 2 Sizes: 9 & 12” | great for scribing circles onto metal or wood.
  • Useful for transferring measurements with the surface is uneven or irregular.
  • Locking screw will hold the caliper in position to get an accurate measurement.
  • Place the tips on a precision ruler to obtain perfect measurements.
  • Made of steel with hardened tips for scribing.
Check Stock

IRWIN Tools 2050 Magnetic Box Beam Level. 24-Inch (1794076), Blue

  • Continuous edge increases level durability to ensure accuracy over time, protects center vial bubble, and allows for continuous scribing..
  • Plumb Site offers dual-sided, undistorted viewing in the plumb position and easy, more accurate plumb readings..
  • Retractable end-caps allow for scribing into and through corners, increasing work efficiency..
  • Rare earth magnets are 5 times stronger than strip magnets and allow for easy, hands-free steel construction work..
Check Stock

EZ Square Holder

  • MULTIPLE GRADATIONS: Make the exact mark you need! Gradations Included For Marking Common, Hip, Valley, And Jack Rafters.
  • FEATURES: Pocket-Sized Swanson Blue Book, A Comprehensive Guide To Help Workers Make Correct Angle Cuts For Any Pitched Roof, and it includes pages of....
  • INCLUDES: Features Common To 5 Different Tools (Try Square, Miter Square, Saw Guide, Line Scriber, And Protractor) Making The Speed Square Something....
  • EASY TO USE: 1/4-In Spaced Scribing Notches And The Diamond Cutout For Easy Rafter Seat Cuts And Scribing The Most Common And Popular Stud Widths, and....
  • MADE IN USA: The Speed Square, made in the USA since 1925, is essential for every carpenter, construction professional, roofer, and DIYer.
Check Stock

Enhon Welders Pencil with 12PCS Refills, Mechanical Metal Marker Silver Pen with Built in Sharpener for Welding, Steel, Pipefitters, Fabrication, Woodworking (4 Set)

  • The Portable Design: the metal marker pencil has a built in sharpener, a pocket clip, non slip knurled grip and 3 claw nibs holder, comfortable to use and portable to carry for the design of metal marker mechanical pencil when you are scribing or do welding work.
  • Visible Sign: compared to soapstone markers and other refills, silver metal marker refills are reliable and suitable for making visible marks on dark metal or steel pipes because of the Kaolin material, which is very available for welders plumbers steelworkers who work even in dark environments.
  • Widely Applicable: welders pencil can be widely applied to make illuminating marks for steel welding, architects designing, sheet metal and steel rob scribing, carving supplies, metal layout tool.
  • Widely Applicable: solid silver marker pencil can be widely applied to make illuminating marks for steel welding, architects designing, sheet metal and steel rob scribing, carving supplies, metal layout tool.
  • Package Content: you will receive a package that comes with 4 piece of welder pencil and 48 pieces of round metal marker pencil refills, sufficient quantity to meet your use or replacement needs.
Check Stock

Adjustable Marking Gauge,Aluminum Alloy Scribing Mortise Gauge Woodworking Marking Gauge Double Head Mortise Gauge for Woodworking,Wood Marking

  • Made of Aluminum Alloy: Aluminum Alloy body, light weight, strong quality, resistant to corrosion, has long service life. Rounded edges, comfortable to handle, won't scratch your hands. Package includes 1pc main woodworking scribe, 2pcs copper nuts, 2pcs straight scribers, 2pcs stainless steel marking rods..
  • Two Adjustable Rods: This Woodworking Scribe Gauge with 2 independently adjustable scribers, can scribe both sides of a mortice at once..
  • Wide Application: The Adjustable Marking Gauge can mark soft metal, wood, ceramic tile, etc. It is great for finding the exact center. Suitable for both amateur DIY and skilled carpenter to use, mainly applied for marking, scribing, laying out upon various joinery or other woodwork..
  • Easy to Operate: The nuts are thickened and the anti-slip teeth are added additionally. Easy to handle and ensures a good work performance and helps to improve efficiency. Both the ink refill and the scribing needle can be used in this scribe, you have multiple choices to help you complete the scribing perfectly..
  • Practical Tools: Equipped with two level bubbles, which can measure the level and also measure the angle of 45 degrees.The horizontal direction is clear at a glance, the workmanship is fine, and the practicability is strong..
Check Stock

Zeglavi Adjustable Marking Gauge Woodworking Scriber Mortise Gauge Aluminum Alloy DIY Draw Line Metal Ceramic Wood Scribing Tools for Carpenter

  • ...bers, can scribe both sides of a mortice at once..
  • Wide Application: The Adjustable Marking Gauge can mark soft metal, wood, ceramic tile, etc. It is great for finding the exact center. Suitable for both amateur DIY and skilled carpenter to use, mainly applied for marking, scribing, laying out upon various joinery or other woodwork..
  • Easy to Operate: The nuts are thickened and the anti-slip teeth are added additionally. Easy to handle and ensures a good work performance and helps to improve efficiency. Both the ink refill and the scribing needle can be used in this scribe, you have multiple choices to help you complete the scribing perfectly..
  • Practical Tools: Equipped with two level bubbles, which can measure the level and also measure the angle of 45 degrees.The horizontal direction is clear at a glance, the workmanship is fine, and the practicability is strong..
Check Stock

Swanson Tool Co T0701 12-Inch Composite Speedlite Square Layout Tool, Orange, made of High Impact Polystyrene

  • Includes 1/4" spaced notches to use for scribing lines (tag carded).
  • Constructed of lightweight high-impact structural foam plactic.
  • Packaged individuallyor in display merchandiser (tag carded).
Check Stock

Marhynchus Leather Marking Pen Japanese Style Marker Leather Scriber DIY Handmade Leather Tool

  • Made of high-quality stainless steel, exquisite in appearance, durable in use.
  • The scribing effect is smooth, so the lines are beautiful, when you make leather, it is a good choice for you..
  • The top design is very intimate, small round head is designed to protect your fingers from injury during use..
  • The Leather scribing pen has 2 main functions: tracing and positioning, is mainly used for pattern positioning, leather printing and line description..
  • If there are any quality problems with our products or our store purchase, please contact us and we are always ready to help you..
Check Stock

SWANSON Tool Co S0101 7 Inch Speed Square Blue

  • MULTIPLE GRADATIONS: Make the exact mark you need! Gradations Included For Marking Common, Hip, Valley, And Jack Rafters.
  • Useful For Determining And Marking Angles And Making Square Cuts On Boards.
  • FEATURES: Pocket-Sized Swanson Blue Book, A Comprehensive Guide To Help Workers Make Correct Angle Cuts For Any Pitched Roof, and it includes pages of inch rise per foot run data - meaning you don't have to do the math..
  • INCLUDES: Features Common To 5 Different Tools (Try Square, Miter Square, Saw Guide, Line Scriber, And Protractor) Making The Speed Square Something That Belongs On Every Tradesman'S Tool Bench.
  • EASY TO USE: 1/4-In Spaced Scribing Notches And The Diamond Cutout For Easy Rafter Seat Cuts And Scribing The Most Common And Popular Stud Widths, and Black gradations against its non-glare, matte finish make for easy reading in any lighting conditions.
  • MADE IN USA: The Speed Square, made in the USA since 1925, is essential for every carpenter, construction professional, roofer, and DIYer.
Check Stock

Swanson Tool Co S0101SDP217 7 inch Speed Square and Speed Draw Carpenter Pencil Holder Value Pack

  • This kit is designed to be the perfect addition to every toolbox since it includes the Speed Square a Blue Book one carpenter pencil and our handy new....
  • The Speed Square made in the USA since 1925 is essential for every carpenter construction professional roofer and DIYer since you can use it in....
  • The Speed Square also features very handy 1/4-in spaced scribing notches and our patented Diamond cutout for easy rafter seat cuts and scribing the....
  • This kit includes the pocket-sized Swanson Blue Book a comprehensive guide to help workers make correct angle cuts for any pitched roof.
  • The Speed Draw cuff installs easily and keeps your carpenter pencil handy and accessible - it's a comfortable grip as an added benefit!.
Check Stock

Uaker Multi-Function Scribing Tool Woodworking Compass for Woodworking Scribe Tool ABS Scribe Tool with Deep Hole Pencil DIY Woodworking Scribe

  • Easy to use: The pen holder and nut tightness can be changed according to your needs to meet your needs, Ensure precision accuracy..
  • Packing List: Includes 1 compass scribe and 1 pencil, 5-13/16 inches long, Fits directly into your pocket..
  • Accurate: Easily maintain a consistent scribe offset, keeping parallel to the surface every time for improved accuracy..
  • Wide Application: It is a versatile multi-tool with more than 15 scribing functions, Great for scribing when installing trim, paneling, home projects,....
  • Buy with Confidence: If you have any questions or problems during your daily use, please feel free to contact us and we will provide a refund or....
Check Stock