Reviews Screws For Cedar Decking

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ... + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

No. 10 x 1\ Stainless Phillips Pan Head Wood Screws (100 Pack), 18-8 (304) Stainless Steel Commercial Grade Corrosion Resistant Choose Size by Bolt Dropper

  • TYPE 304 (18-8) GRADE 3 INCH STAINLESS STEEL CONSTRUCTION SCREWS for Decking, Fencing and general-purpose woodwork..
  • RECOMMENDED for use in all COASTAL, WET and OUTDOOR applications, including decks, balustrades, fences, jetties, walkways and general construction work..
  • HIGH CORROSION RESISTANCE means no more ugly rust stains on your beautiful outdoor timber structures..
  • SUITABLE for use with all HARDWOOD, SOFTWOODS and PRESSURE TREATED lumber, including Redwood and Cedar..
  • STAR DRIVE HEAD, Torx Driver Included. TYPE 17 POINT for easy driving (pilot holes recommended) . NIBS under the head help seat the screw. BURNISHED finish. Note that these are not self drilling screws..
Check Stock

#10 x 3.5 Inch 305 Grade Stainless Steel Deck Screws 350 Pieces | T25 Star Torx Drive Flat Head Type 17 Point | Stainless Steel Screws by Allen s Trading Co Eagle Claw Fasteners

  • TYPE 305 GRADE 3-1/2 INCH STAINLESS STEEL CONSTRUCTION SCREWS for Decking, Fencing and general-purpose woodwork..
  • RECOMMENDED for use in all COASTAL, WET and OUTDOOR applications, including decks, balustrades, fences, jetties, walkways and general construction work..
  • HIGH CORROSION RESISTANCE means no more ugly rust stains on your beautiful outdoor timber structures..
  • SUITABLE for use with all HARDWOOD, SOFTWOODS and PRESSURE TREATED lumber, including Redwood and Cedar..
  • STAR DRIVE HEAD, Torx Driver Included. TYPE 17 POINT for easy driving (pilot holes recommended) . NIBS under the head help seat the screw. BURNISHED finish. Note that these are not self drilling screws..
Check Stock

AMTECO INC TWP-101-1 Gallon Cedar Extention Oil Stain

  • Ideal for use on rough-sawn cedar, wood siding, shutters, fences, porch decking, wood shingles, shakes, and fascia.
Check Stock

#10 X 2 1/2 Inch Stainless Steel Deck Screws 350 Pieces | T25 Star Torx Drive Flat Head | Stainless Steel Screws for Decks Docks Fencing or General Outdoor Construction and Home Improvement Projects

  • TYPE 304 (18-8) GRADE 2-1/2 INCH STAINLESS STEEL CONSTRUCTION SCREWS for Decking, Fencing and general-purpose woodwork..
  • RECOMMENDED for use in all COASTAL, WET and OUTDOOR applications, including decks, balustrades, fences, jetties, walkways and general construction work..
  • HIGH CORROSION RESISTANCE means no more ugly rust stains on your beautiful outdoor timber structures..
  • SUITABLE for use with all HARDWOOD, SOFTWOODS and PRESSURE TREATED lumber, including Redwood and Cedar..
  • STAR DRIVE HEAD, Torx Driver Included. TYPE 17 POINT for easy driving (pilot holes recommended) . NIBS under the head help seat the screw. BURNISHED finish. Note that these are not self drilling screws..
Check Stock

Topdex Hidden Deck Fasteners - Strong Plastic Clips with Stainless Steel Screws Inserts 0.19' Gap Spacing Between Wood Flooring Boards - Outdoor Decking Hardware, (90 Clips - 50 sqft)

  • A Sleek-Looking Deck – Build your decking like a pro with the help of these plastic fasteners. These flooring spacers let you mount your boards to the joists while keeping the screws hidden from sight..
  • Consistent Gap Spacing – Maintain the streamlined look of your decking and balcony flooring with these clips. Each plastic clip is designed to create a 0.19″ gap in between your terrace boards..
  • Easy Installation – Save time, effort, and energy in building your deck. To mount, just insert the clip into the side groove of your decking board, drive the screw with your drill, and you’re all set..
  • Crafted To Last – The last thing you need are decking clips that easily break. Our clips are made of tough plastic, while the screws are made of stainless steel that withstands rust or corrosion..
  • Decking Tools With Unbeatable Value – Get the most out of your money whenever you purchase our decking fastener clips. Each pack comes with plastic fasteners and stainless steel mounting screws..
Check Stock

#10 x 3 Inch Stainless Steel Deck Screws 350 Pieces | T25 Star Torx Drive Flat Head | 304 Grade Stainless Steel Wood Screws High Corrosion Resistance by Allen s Trading Co Eagle Claw Fasteners

  • TYPE 304 (18-8) GRADE 3 INCH STAINLESS STEEL DECK SCREWS for Decking, Fencing and general-purpose woodwork..
  • RECOMMENDED for use in all COASTAL, WET and OUTDOOR applications, including decks, balustrades, fences, jetties, walkways and general construction work..
  • HIGH CORROSION RESISTANCE means no more ugly rust stains on your beautiful outdoor timber structures..
  • SUITABLE for use with all HARDWOOD, SOFTWOODS and PRESSURE TREATED lumber, including Redwood and Cedar..
  • STAR DRIVE HEAD, Torx Driver Included. TYPE 17 POINT for easy driving (pilot holes recommended) . NIBS under the head help seat the screw. BURNISHED finish. Note that these are not self drilling screws..
Check Stock

#10 x 3 Inch Stainless Steel Deck Screws 1750 Pieces | T25 Star Torx Drive Flat Head | 304 Grade Stainless Steel Wood Screws High Corrosion Resistance by Allen s Trading Co Eagle Claw Fasteners

  • TYPE 304 (18-8) GRADE 3 INCH STAINLESS STEEL DECK SCREWS for Decking, Fencing and general-purpose woodwork..
  • RECOMMENDED for use in all COASTAL, WET and OUTDOOR applications, including decks, balustrades, fences, jetties, walkways and general construction work..
  • HIGH CORROSION RESISTANCE means no more ugly rust stains on your beautiful outdoor timber structures..
  • SUITABLE for use with all HARDWOOD, SOFTWOODS and PRESSURE TREATED lumber, including Redwood and Cedar..
  • STAR DRIVE HEAD, Torx Driver Included. TYPE 17 POINT for easy driving (pilot holes recommended) . NIBS under the head help seat the screw. BURNISHED finish. Note that these are not self drilling screws..
Check Stock

Duckback Products DB-1902-5 5-Gallon Red Cedar Transparent Stain

  • Super deck, 5 gallon, red cedar, Oil exterior transparent stain, VOC 350, stain & sealer in 1 coat.
  • Super deck 5 Gallon Red Cedar Oil Exterior Transparent Stain.
Check Stock

#10 x 3-1/2 Inch Stainless Steel Wood Screws 1000 Qty | Star Torx Drive Flat Head | 305 Grade Stainless Steel Wood Screws by Allen s Trading Co Eagle Claw Fasteners 2 X Driver Bits Included

  • TYPE 305 GRADE 3-1/2 INCH STAINLESS STEEL CONSTRUCTION SCREWS for Decking, Fencing and general-purpose woodwork..
  • RECOMMENDED for use in all COASTAL, WET and OUTDOOR applications, including decks, balustrades, fences, jetties, walkways and general construction work..
  • HIGH CORROSION RESISTANCE means no more ugly rust stains on your beautiful outdoor timber structures..
  • SUITABLE for use with all HARDWOOD, SOFTWOODS and PRESSURE TREATED lumber, including Redwood and Cedar..
  • STAR DRIVE HEAD, Torx Driver Included. TYPE 17 POINT for easy driving (pilot holes recommended) . NIBS under the head help seat the screw. BURNISHED finish. Note that these are not self drilling screws..
Check Stock

The Hillman Group 48272 8 X 1-3/4-Inch Flat Head Square Drive Deck Screw Brown 500-Pack,Ceramic

  • Green hue to complement your decking finish.
  • Ceramic coating provides superior rust and corrosion protection.
  • Type 17 point and flat head eliminate predrilling and will lay flat with your decking.
  • Square drive for confident stick fit while driving.
  • For use in all woods: cedar, redwood, pressure treated wood (ACQ, CA, and CCA recommended).
Check Stock

WHITEHORSE Premium Cedar Bird House - Weatherproof Design with a 15 sq inch Floor - A Bluebird Box House Built to NABS Specs - Enjoy Bird Watching While Supporting Birds EABL

  • WEATHERPROOF - Vent holes are cut at an upward angle to keep rainwater out.
  • Floor is recessed by 3/4" to keep the nest dry.
  • Dado joints keep this birdhouse dry and less drafty.
  • WELL-BUILT - Made from 3/4" thick western cedar wood.
  • A stainless steel guard protects the entry hole.
  • A 1" thick wooden guard thwarts predators.
  • Decking screws used instead of nails for a long-lasting construction.
  • EASY TO INSTALL - A great nestbox for creating a trail! Included: 4 exterior-grade screws, detailed installation tips, and our popular guide on how to successfully attract bluebirds and other species.
  • BIRDS LOVE IT - Inspired by the very successful Gilwood and XBOX birdhouses. This nesting box has a floor size of 4.25" x 3.5" (15 square inch), and a 1.5" entry hole that is suitable for Eastern Bluebirds among other species.
  • HAPPINESS GUARANTEED - We stand by the quality of this bird box and we are confident that it will last longer than other bird houses for outside! (Remember: select a bird house size based on your location on the provided bird-range map).
Check Stock

304 Stainless Steel Start Clips Black Deck Clips Universal Decking Clips with Decking Screws for Composite Deck Boards, Hidden Fasteners (40)

  • Stainless Steel Material: starter clips are made of quality 304 stainless steel, strong texture, corrosion resistance, not easy to fade or break, suitable for outdoor installation, can play a nice fastening effect, to provide you with long term service.
  • Use Occasion: composite decking starter clips are applied to install composite decking with grooves on the sides, which conceal themselves while holding the deck in place, making them practical and attractive.
  • Installation Method: place the hidden deck fasteners for composite on the floor joists and fix them with screws, one every 12 to 16 inches, then push the floor into the card, easy to apply, will not waste a lot of your time and effort.
  • Rich Quantity to Meet Your Needs: the package includes 40 pieces of hidden deck clips, plenty quantity to meet your use demands, replacement demands and sharing demands, can give you a nice shopping experience.
  • Equipped with Screws: each starter clips for composite decking comes with a suitable stainless steel screw, easy to install, which can save you the trouble of buying screws and bring you a nice use experience.
Check Stock