Reviews Screw in Legs

Furniture Legs 6 Inches Sofa Legs Mid Century Modern Walnut Wood Furniture Feet Replacement Legs with Leg Mounting Plates & Felt Protectors for Sofa Cabinet Couch Ottoman Coffee Table Bench Chair

  • ►Full Set Walnut Finished 6” Furniture Legs- 4*(M8) Furniture Legs+ 4*Anti-Scratch Floor Protection Pads+ 4* (M8) Furniture Leg Mounting Plates+ 4* Conversion Hanger Bolts+16* Screws. With this full set of furniture legs, you will have EVERYTHING ready to install/ replace furniture legs like sofa, couch, ottoman bench, coffee table, chest of drawes,Loveseat, cabinets and more!.
  • ►Mid- Century Modern Style- Coated with walnut varnish to look vintage and always fashion. Walnut sofa legs easy matching with your floor in all colors. The replacement furniture legs are expertly crafted and constructed with highest quality oak hardwood to ensure sturdy and long service life..
  • ►Specifications- Wood Leg Height(Not includes the Screw): 6” /15.24cm.
  • Pri-drilled with M8 (Metric 8mm) Screw (compatible with IKEA Furniture Standard).
  • Bottom Diameter:1.6”/ 4cm. Leg Mounting Plates with M8 Screw Thread:2”by 2”.
  • Hanger Bolt: Convert European furniture feet to U.S. standard legs..
  • ►Floor Protection Pads- Comes with 4pcs of sturdy felt floor protectors to ensure your hardwood floors stay in pristine condition without scratching. These furniture feet replacement legs have thick felt pads which will stay in place for years! Fel....
Check Stock

2Pcs Metal Adjustable Height Bed Frame Support Leg, Steel Bed Frame or Wooden Bed Center Slat Support Leg, Sofa Furniture Cabinet Feet Support Leg (5.9' - 8.6')

  • Function: The support leg is suitable for most of the bed frames, bed center slat, which can protect your bed and mattress from damage or sagging..
  • Measure: The support legs of the bed frame have three different height sizes, and the height of the support legs can be adjusted. 5.9in(Adjusts from 5.9" to 8.6"), 7.8in(Adjusts from 7.8" to 10.6"),9.8in（Adjusts from 9.8" to 12.6"）..
  • More stable: The diameter of the adjusting screw at the bottom of our bed leg is 12mm, which is 20% thicker than other brands, so it is more stable.Leg bottom PVC pad are non-slip and wear resistant..
  • Easy to install: lf the bed frame has holes,align the double holes with the legs for bed frame and tighten the screw. If the bed frame has no holes, clamp the bed frame with bed frame legs and auxiliary plate and tighten the screws..
  • Packing included：2 pcs bed frame center support Leg, 4 pcs 2.3" screw，2 pcs auxiliary plate..
Check Stock

Solid Wood Furniture Legs, Sofa Legs Set of 4 for Furniture, 5-Inch Couch Legs, Square Mid Century Desk Legs, Replacement Legs for Couch Dresser Sideboard Recliner Circle Chair

  • ►Full Set 3” Furniture Legs -- 4*(M8) SQUARE Furniture Legs+ 4*Anti-Scratch Floor Protection Pads+ 4* (M8) Leg Mounting Plates+16* Screws. With this set of furniture legs, you will have EVERYTHING ready to install/ replace furniture legs like sofa, couch, ottoman bench, coffee table, bed,loveseat, cabinets and more!.
  • ►Mid- Century Modern Style- Coated with walnut varnish to look vintage and always fashion. Walnut sofa legs easy matching with your floor in all colors. The replacement furniture legs are expertly crafted and constructed with highest quality oak hardwood to ensure sturdy and long service life..
  • ►Specifications- Wood Leg Height(Not includes the Screw): 3”.
  • ►Floor Protection Pads- Comes with 4pcs of sturdy felt floor protectors to ensure your hardwood floors stay in pristine condition without scratching and prolong the life of the wood legs..
  • ►Easy to Install- All accessories are supplied for installation. Pre-drilled with M8 mounting plates to install the furniture legs..
Check Stock

Furniture Legs 3 Inches Sofa Legs Square Couch Legs Mid Century Modern Walnut Wood Furniture Feet Replacement Legs with Mounting Plates Set & Felt Protectors for Sofa Cabinet Couch Bed Chair

  • ►Full Set 3” Furniture Legs -- 4*(M8) SQUARE Furniture Legs+ 4*Anti-Scratch Floor Protection Pads+ 4* (M8) Leg Mounting Plates+16* Screws. With this set of furniture legs, you will have EVERYTHING ready to install/ replace furniture legs like sofa, couch, ottoman bench, coffee table, bed,loveseat, cabinets and more!.
  • ►Mid- Century Modern Style- Coated with walnut varnish to look vintage and always fashion. Walnut sofa legs easy matching with your floor in all colors. The replacement furniture legs are expertly crafted and constructed with highest quality oak hardwood to ensure sturdy and long service life..
  • ►Specifications- Wood Leg Height(Not includes the Screw): 3”.
  • ►Floor Protection Pads- Comes with 4pcs of sturdy felt floor protectors to ensure your hardwood floors stay in pristine condition without scratching and prolong the life of the wood legs..
  • ►Easy to Install- All accessories are supplied for installation. Pre-drilled with M8 mounting plates to install the furniture legs..
Check Stock

MAKEOMG Folding Adjustable Position Assist Chair Portable Couples Mount Stool Elastic Furniture for Bedroom Bathroom Bear Weight up to 300 pounds

  • MONEY SAVER - Table Leg Hardware Replacement Kit For Furniture Wood Feets Is Big Money Saver As It Comes With All The Things You Need To Replacement Legs For Couch Or Your Furniture Leg M8 Screw And Cap, 4 Felt Pads, 4 Metal Pads(T Nuts Bracket Plate), 2 Drills Bits(12mm, 3mm).
  • HARDWARE FOR FURNITURE REPLACEMENT LEGS - This Furniture Leg Mounting Kit Can Attach Legs To Any Sofas, Couches, Seats, Dresser Or Ottomans. The Leg Mounting Kit Comes With Right 2 Size Drill Bits To Replace Your Furniture Legs Easily and Quickly..
  • 2 DRILLS BITS - Furniture Feet Set Comes With 2 Drills Bits (12mm, 3mm) Which Saves Time And Money And Makes Replacement Furniture Legs Easy And Fast. 12mm Drill Helps You To Make Exact Hole For Wood Legs And 3mm Is Perfect For Screws..
  • ALL ON ONE KIT - 2 Drills Bits (12mm, 3mm), T Nuts Round (Metal Pads) M8 Screw, 3M Felt Pads Makes It Perfect All In One Table Leg Mounting Hardware Kit..
Check Stock

Puller Set, 13 Pieces, Bar

  • Separator tools are used with bar puller and legs for a wide variety of pulling jobs.
  • Includes the two most popular bearing splitters - 2 inch and 3 inch - plus four sets of hex push puller legs.
  • 5 inch bar-type puller head with forcing screw.
  • The 5 inch puller cross-bar with a 6-1/4 inch forcing screw and each of the bearing separators may be used separately or in combination with other pullers or tools.
  • Blow-molded plastic storage case keeps set contents organized and protected from loss.
Check Stock

Amazon Basics 20-Piece Felt Gliders with Screw Chair Glides

  • 20-piece set of screw-in furniture gliders for protecting floors from scuffs and scrapes.
  • 22mm felt pad construction makes moving furniture around the room easier and reduces floor damage.
  • Steel screw design can be securely attached to chair legs, table legs, and more.
  • long-lasting and does not fall off or leave sticky residue.
  • Easy installation by pre-drilling holes and screwing in by hand or with an electric drill.
  • Includes a resealable case for easy storage.
Check Stock

2Pcs Adjustable Height Center Support Leg for Bed Frame Steel Bed Frame or Wooden Bed Center Slat Support Leg Sofa Furniture Cabinet Feet Grey Height 5.9 to 8.6 inch

  • Height adjustable: bed frame center support is 5.9in(Adjusts from 5.9" to 8.6"), . The bed frame center support legs is suitable for most of the bed....
  • Easy to install: lf the bed frame has holes,align the double holes with the legs for bed frame and tighten the screw. If the bed frame has no holes,....
  • More stable: The diameter of the adjusting screw at the bottom of our bed leg is 12mm, which is 20% thicker than other brands, so it is more stable..
  • More durable:The bed frame center support leg is made of high quality steel, anti-corrosive and will not rust, we have thickened the pipe wall to make....
  • Hardware included: 2pcs bed center support legs Adjustable from 5.9in(Adjusts from 5.9" to 8.6"),. 4pcs 2.48"screw，2pcs supplementary plate..
Check Stock

Ezprotekt 4 Inch Bed and Furniture Risers with Screw Clamp, Sofa Tables Chair Risers Only fit for Right Angle Chair Leg, Adjustable Leg Width from 0.8''–1.6'', Supports 20,000 lbs (Brown, 4 Pack)

  • ...1.6''.Table risers is more for small furniture legs. In fact, it is not suitable for very bulky and wide furniture leg, Actual Height: 4 inch, Heightened Groove Protection: 1.1inch. NOTE:Please measure your furniture legs carefully before buying..
  • ❤【UPGRADE SCREW CLAMP FIXED & NOT FALL OFF】Don`t worry chair risers fall off. Other chair risers stickiness is not enough, it is easy to fall off. To solve this problem, upgraded couch risers use screw clip adjust fixing. 3 cm grooves sinking, wrapped furniture legs are not easy to fall..
  • ❤【CREATE USABLE SPACE】- Not only storage space under beds, but also allows vacuum cleaners or robot vacuum work more flexibly. They also make more convenient for the elderly to get in and out of bed. avoiding shoulder pain and neck pain caused by low height of furniture..
  • ❤【PROTECT YOUR HARDFLOORS FROM SCRATCHES】Strong couch legs risers bottom is made of High Density felt furniture pads Bottom, Bottom felt pads Protect your floors from scratch. Protect your hardwood, ceramic tile and linoleum floors from marring and scuffs..
Check Stock

Metal Black Table Legs Heavy Duty Square Iron Metal Desk Legs Set of 2 28” Height 18” Wide Furniture Legs,Dining Table Legs,Industrial Table Legs(Only Legs Without Board)

  • BLACK POWDER COAT:These black table legs have a good looking surface finish and have not warped or discolored under use.Replacing the out-of-style office desk and attaching these legs to create a lighter,more modern desk in your home..
  • TABLE LEGS FOR HEAVY DUTY:The metal table legs 28 inch are made of strong wrought iron and are weld and grind by hand to provide excellent quality.They will beautifully outline Your table top and give good stability even for heavy dinner table tops.Very well built and definately more weight bearing ability than you will ever need..
  • ADJUSTABLITY AND FLOOR PROTECTION:The ability to level the legs with the adjustable feet that screw on the bottom was perfect,great for preventing a wobbly table and protecting the floor from scratches..
  • SIMPLE AND PRACTICAL:Perfect solution to adding more storage in your home.Metal desk legs were the nice height for custom coffee tables,side tables,console tables,dining room table,end tables,cocktail tables and more.The maximum space utilization is improved..
  • EASY TO ASSEMBLE:Very easy to install and came with all of the necessary hardware.The mounting plate is wide and the screw holes are attached in the proper position,working with different thicknesses of whatever you are supporting..
Check Stock

Ezprotekt Adjustable Bed and Furniture Risers with Screw Clamp, 4 Inch Heavy Duty Sofa Tables Chair Risers, fit Square/Round Chair Leg Diameter from 0.8''–1.6'', Supports 20,000 lbs (Black, 4 Pack)

  • ...hard plastic, which can stand the weight of the heaviest of furniture in your home or office, they can safely support a total of up to 20,000 lbs. They won't crack like other risers. High density bottom felt pads protect your hardwood, ceramic tile linoleum floors and carpet from scratches and scuffs..
  • ❤【UPGRADE SCREW CLAMP FIXED & NOT FALL OFF】You don`t worry about bed risers fall off. Other chair risers stickiness is not enough, it is easy to fall off. To solve this problem, we upgraded adjustable bed risers with screw clamp. 3 cm grooves sinking, moving will not tilt. Use screw clip adjust fixing, wrapped furniture legs are not easy to fall. Adjustable sofa/couch/table/desk risers is easy to install. Step 1). Clean table leg and keep dry. Step 2). Center Align Chair Legs. Step 3). Use hexagonal screw to lock. Step 4) Done..
  • ❤【ADJUSTABLE CHAIR LEG WIDTH】- 4 Inch Lift Bed and Furniture Risers Fit Round or Square legs diameter from (22mm/0.8 inch–42mm/1.6 inch). The Total Height: 134 mm/5.3 inch, Actual Increased Height: 103mm/4 inch, Side Length: 52 mm/2 inch. Heightened Groove Protection: 30mm/1.18 inch. WARM TIPS: Not suitable for width legs smaller than 22mm (0.8 inch) and not suitable for width legs more than 42mm (1.6 inch). NOTE: N....
Check Stock

AOWISH 4-Pack Stainless Steel Furniture Legs Furniture Foot Upgraded & Thickened Cabinet Metal Legs 2 Inch Diameter Shelves Sofa Table Kitchen Adjustable Feet with 16 Screws (4 inch/100mm-Black)

  • ✔ SET OF 4 LEG MOUNTING PLATE - 4pcs of 49*49mm /2"*2" T-Plate, 4pcs of M8 hanger bolts, 4pcs of M8 female converters, 16pcs of screw adapters for 5 mm unthreaded holes.
  • ✔ CONVERT TO U.S. STANDARD LEGS - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use standard 5/16” and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame.
  • ✔ FURNITURE REPAIRING REPLACEMENT - this furniture leg mounting plate can attach legs to new or damaged sofas, couches, seats, ottomans, etc.
  • ✔ WIDELY APPLICATION - These plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • ✔ EASY TO INSTALL - No need to purchase hanger bolts and the other screws separately. You can raise the height of your sofa to replace the legs screw with this matched item.
Check Stock

1/4

  • Quality Material: Threaded studs are made from galvanized steel with black PP non-skid base. Each package contains 20pcs leveling foot adjusters.
  • Easy to Use: Screw in leveler to the height you desire to level your chairs and tables. Keeps your furniture and floors from being scratched and damaged, keep patio furniture legs from wearing, also can reduces noise while moving furniture.
  • Wide Application: Quality galvanized steel threaded patio furniture glides help to level your tables and chairs. Helps to get rid of the wobble. Suit for all types of floors including wood, laminate, hardwood, tile, carpet. Widely used in furniture, tables, boxes, chests, desks, chairs, TV cabinets, tea machines, shoe cabinets, washing machine heightening, bathroom cabinets, various other furniture.
  • Size: 1/4″-20 UNC leveling feet, it’s a common size for furniture feet which is Made in USA. Thread shaft is 0.71″(18mm) long, and the diameter of the round base is 0.61″(15.5mm). Your local hardware store can help you identify the correct replacement size.
  • Tips: Please choose the correct threaded replacement size before purchase. M6 screw thread is a common size for Made in China patio furniture feet. 1/4″-20 UNC screw thread fits most of Made in US....
Check Stock