Neewer Low-Profile Ball Head 360 Degree Rotatable Tripod Head for DSLR Cameras Tripods Monopods
- HIGH STABILITY: Low-profile ball head design create stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability.
- WIDE COMPATIBILITY: Equipped with 1/4 screw, the removable quick release plate is suitable for all SLR cameras. 3/8 screw hole at the bottom can be attached to tripod or monopod.
- FREE ROTATION BALL HEAD: Screw knob can quickly tighten or loosen the ball and allows it to move freely in all directions.
- SMALL AND PRRTABLE: Height only 68mm/ 2.68inches, Weight only 197g/ 0.43lbs, easy to carry.
- STURDY AND DURABLE: Max Load up to 10 kg/ 352.74 ounce, made of aluminium alloy material, it is very strong and durable.
Check StockBefenybay Ball Screw SFU1605 (Diameter 16mm Pitch 5mm) Length 400mm with Metal Ball Screw Nut for CNC Machine Parts(400mm)
- High service life time due to low friction.
- Ball screw diameter:16mm, ball screw pitch:5mm, ball screw length:400mm(15.75 inch).
- Compatible with BK12/BF12 standard end machining.
- The total length is 400mm and the effective ball screw length is 335mm.
- Do not remove the ball screw nut from the ball screw, because it is matched, or it will be difficult to install it again.
Check StockCNCCANEN Ballscrew SFU1204-300mm with BK10/BF12 + SBR12-300mm Linear Rail Guide Set SBR12UU Block Bearing Sliding Shaft Rod Kit for CNC Machine DIY
- High service life time due to low friction.
- Ball screw diameter:12mm, ball screw pitch:4mm, ball screw length:400mm(15.75 inch).
- The total length is 400mm and the effective ball screw length is 335mm.
- Do not remove the ball screw nut from the ball screw, because it is matched, or it will be difficult to install it again.
Check StockZeberoxyz 1PCS SFU1605 Ballscrew Nut Diameter 16mm 5mm Pitch Ball Screw Single nut for 1605 nut housing Bracket CNC Carving Machine Parts
- Material:The ball screw is made of high-quality bearing steel material, high service life time due to low friction.
- low operation noise, Compact design for easy installation and removal.
- Dimensions:Ball screw nut inner diameter:16mm, Lead: 5mm,outer diameter:28mm,flange diameter:48mm,Height: 42mm, ball screw nut pitch:5mm.
- Function:The main function of this ball screw is to convert rotational motion into linear motion with high accuracy, reversibility and high efficiency,No stick-slip effect.
- Package Content:1PCS Ball Screw Nut SFU1605, 1PCS Black Rod.
- Widely used:Applicable to SFU1605 ball screw, easy to install.
Check StockBefenybay Ball Screw Nut TBI SFU1605 (Diameter 16mm Pitch 5mm) for CNC Machine Parts
- 【 Material】High quality bearing steel material,high service life time due to low friction.
- 【Widely Used】It fits for SFU1605 Ball Screw, easy and quick to install.
- 【Dimensions】Ball screw nut inner diameter:16mm, outer diameter:28mm,flange diameter:48mm,Height: 42mm, ball screw nut pitch:5mm.
- 【Package Include】1pcs Ball Screw Nut SFU1605 , 1pcs Black Rod.
- 【Function】The main function of this ball screw is to convert rotational motion into linear motion with high accuracy, reversibility and high efficiency.
Check Stock
SisterAling 3-Prong Golf Ball Retriever Grabber Pick Up,Back Saver Claw Put On Putter Grip,Suction Cup Ball Grabber,Sucker for Golf Screws Tool (3 Pack)
- ❤【HIGH QUALITY】: The black 3-prong golf ball retriever made by quality plastic andstrong bottom screw, which is strong and durable for a longtime service.All grips come with a hole on the end which easily accommodates the ball claw Simply screw device in hole with the included screw..
- ❤【WITHOUT BENDING】: The SisterAling golf ball picker uper for putter is ergonomic golf ball teeing device.Specifically engineered to help golfers grab golf ball without bending.A better solution to eliminate your back stress.No longer have to bend over to retrieve your ball..
- ❤【UPGRADE CLAW DESIGN】: This golf pick-up tool adopts Widen durable plastic three claw design, which can catch the ball easily, quickly and accurately, grasp accurately and not fall easily.Designed to help golfers grab golf ball without bending..
- ❤【PORTABLE DESIGN】: Lightweight, effective simple to use and suitable for any golf putter（Doesn't fit a Super Stroke）handleand easily retrieves the golf ball from the cup.Can be fixed on the putter grip.You can take it away when you do not need it while not affecting the function of pushing the ball. Click when needed and it will open automatically..
- ❤【ULTIMATE GIFT】 : Our golf ball retriever is the best gifts for golf lovers.....
Check Stock
SFU2005 300mm Ballscrew kit + Set BK/BF15 Kit + 2005 Ballscrew RM2005 L300-1000mm ball screw with Ball Nuts + Screw Nut Housing for CNCRouter Machine
- 【Package Include】- End Machined ballscrew SFU2005-300mm/11.81inch length with nut + BK15/BF15 end support with locknuts and circlips + 2005 Ball nut housing..
- 【Basic Description】- SFU2005 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
- 【End support & Nut Housing】Ball screw vertical end supports BK15 and BF15, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 2005 nut housing matching ball screw, simple assembly and convenient installation..
- 【Main Features】- The ball screw is equipped with a deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
- 【Application Areas】- SFU2005 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation d....
Check Stock
SmallRig Mini Ball Head Tripod Head Camera 360° Panoramic with 1/4 Screw 3/8 Thread Mount and Quick Release Plate Metal Ball Joint for Monopod DSLR Phone Gopro Max Load 4.4lbs/2kg - BUT2665
- 【UNIVERSAL COMPATIBILITY】SmallRig mini ball head features 1/4 " thread QR plate screw, 1/4 to 3/8 Screw Adapter and a 3/8 " bottom screw thread which is suitable for most DSLR cameras, camcorders, tripods, sliders, monopods..
- 【360 Degree Swivel Tripod Head】 Ensure 360° panoramic rotation for panoramic shooting, -90°/+45° front tilt and -50°/+50° lateral tilt for multi-angle adjustment including horizontal shooting and vertical shooting..
- 【PRECISION PANNING BASE】The base of SmallRig ball head is finely laser-engraved in 5° increments from ±0°-330° for tracking progressive panning, ideal for multi-shot panoramic photography.
- 【ALUMINUM ALLOY MATERIAL】: Made of aluminum alloy, the Max load is 4.4lbs/2 kg, Very strong and durable. With rubber-padded mount on the top to protect your camera from potential scratches.
- 【HIGH STABILITY】: Low-profile ball head design creates a stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability.
Check Stock
RATTMMOTOR RM/SFU1605 BallScrew Kit, 500mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine
- 【Package Include】- End Machined ballscrew SFU1605-500mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
- 【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
- 【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
- 【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
- 【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devic....
Check StockRATTMMOTOR RM/SFU1605 BallScrew Kit, 1000mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine
- 【Package Include】- End Machined ballscrew SFU1605-1000mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
- 【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
- 【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
- 【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
- 【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devi....
Check StockRATTMMOTOR RM/SFU1605 BallScrew Kit, 350mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine
- 【Package Include】- End Machined ballscrew SFU1605-350mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
- 【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
- 【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
- 【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
- 【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devic....
Check Stock
RATTMMOTOR SFU1204 Ballscrew Kit, SFU1204 RM1204 Ball Screw 400mm Length + Ball Screw Nut Housing+BK10/BF10 End Support +Ballscrew Nut Housing for CNC Router Engraving Machine Milling Machine
- 【Package Include】- End Machined ballscrew SFU1204-400mm length with nut + BK10/BF10 end support with locknuts and circlips + 1204 Ball nut housing..
- 【Basic Description】- SFU1204 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
- 【End support & Nut Housing】Ball screw vertical end supports BK10 and BF10, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
- 【Main Features】- The ball screw is equipped with a deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
- 【Application Areas】- SFU1204 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devices, et....
Check Stock20G Stud Earrings Set for Girls Sensitive Ears with Screw on Safety Backs Surgical Steel Womens Earrings Hypoallergenic ZHIYAOR
- Metal: Made of Stainless Steel,Hypoallergenic,Nickle Free, Perfect Stud Earring for Girls Sensitive Ears.
- Screw on Ball Backs Earrings Design,Very Comfortable, Even Sleeping with Wearing Them,Especially a Nice Choice for Girls.
- Gauge: 20G (0.8mm)，Conventional Earring Size,Suitable for all the People,Used asGeneral Studs Earring,Tragus Cartilage Piercing Jewelry and so on.
- Surface of colorful Czech Crystals Balls are Covered by an Extra Smooth Layer Clear Epoxy ,Very Sparkle under the Light and Crystals Will not fall off.
- Notice:Comfortable Spherical Screw Backs Design is Destined to be a little Difficult to Screw on,Hope You were Patient to Screw it on,Please Screw it on Tightly,Otherwise will Cause Steel Ball Backs Fall out Easily,Thanks for Your Understanding and Support..
Check Stock
