Reviews Screw Hole Punch

Lord & Hodge 1073A-0 1/4\ Handi Grommet KIT

  • C.S. Osborne Brass Plain Rim Grommets And Washers..
  • Brass material with brass finish grommets and washers. You will receive 144 grommets and 144 washers. Made in USA..
  • Size : 4. Diameter of hole : 1/2". 144 washer and grommets per gross.
  • Set these grommets with one of the following tools: C.S. Osborne Plain Washer Grommet Setter, C.S. Osborne Grommet Kits or Press-N-Snap Tool..
  • Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Revolving Hole Punch or Screw Hole Punch..
Check Stock

Adjustable Japanese Screw Punch, Screw Hole Punch, 6 Tip Sizes Leather Paper Craft Adjustable Screw, Leather Hole Punch, Belt Hole Puncher, Wood Handle Hole Punch Bookbinding Tool for Sewing Leather

  • Package Including: Automatic hole punch leather craft tools - come with 5 pcs drills. The diameter of the hole: 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm. leather punch tool is great for leather craft, paper, cutting rubber, plastic, etc..
  • High Quality Leather Hole Punch for Belts: Made of brass with black wooden handle. Wooden handle with a comfortable design for easy punching and less hand fatigue, this wooden punch tool will be easy to use, new design, spin action, easy for operation..
  • Easy to Use: Hold the material securely to keep it from moving and place the screw punch up right where you want the hole and press the punch to handle downward. The bit will turn to make a perfect hole easily. Compared to the general punch, its noise is smaller..
  • Practical Hole Punch Tools: Using a cutting mat, no hammering needed. 5 different drills, enough to satisfy your hole punch needs. Leather belt hole puncher is an excellent choice for making belts and other needs perforated crafts..
  • Widely Application: This item is a hole punch, used in sewing, leather craft, paper craft, printing, cutting rubber, plastic, fiber, felt press and cut, hole punch bookbinding, etc. Note: Avoid disposable multilayer fabric to be perforated together..
Check Stock

ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)

  • Hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material.
  • The pin point is spring-loaded and retracts into handle when punching a hole.
  • Pin point is removable to cut disks with no middle hole – Unscrew top bolt, remove rubber grip, and release Allen socket screw to remove the center pin.
  • BUILT TO LAST: Hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue and more productivity.
  • EASY STORAGE: Heavy-duty 10” x 1.8” x 7.5” inch (25.4cm x 4.6cm x 19.1cm) blow-molded plastic carrying case with built-in latches and handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled by both SAE and metric sizes for quick identification.
  • PACKAGE CONTENTS: Leather hole punch set package includes (1) storage case, (1) pin point punch shaft, and (13) hole punch head sizes – 3/16" (5mm), 1/4" (6mm), 5/16" (8mm), 3/8" (10mm), 7/16" (11mm), 1/2" (13mm), 5/8" (16mm), 3/4" (19mm), 7/8” (22mm), 1” (25mm), 1‐1/....
Check Stock

General Tools 806 Jiffy Centering Punch, Silver

  • The Jiffy Centering Punch makes centering screw holes for hinges, locks, brackets and other countersunk hardware.
  • The tool's tapered end fits inside the hinge or bracket screw hole for automatic centering.
  • For quickly starting screw holes when attaching countersunk hardware such as hinges, hasps, hangers and drawer pulls.
  • Countersunk end ensures starting hole is centered in hardware screw hole.
  • Hardened steel pin for repeated punching and makes easily identifiable marks in wood surfaces.
  • Length: 2-1/2" (68mm). Body diameter: 3/8" (10mm).
Check Stock

NEIKO 02639A 6-Inch Automatic Center Hole Punch with Adjustable One-Handed Spring Impact Chrome-Plated Shank and Premium S2 Steel Tip

  • DRILL PUNCH TOOL: This 6-Inch Automatic Center Hole Punch is the perfect centering punch device to help start screw and drilling holes. Align the tip of this metal hole punch on a variety of hard surfaces to create center holes for fasteners..
  • ADJUSTABLE HOLE-PUNCH TOOL: The spring-loaded center-punch design uses spring tension that can be modified and adjusted for light or heavy marking, punching, or staking. Change the strike force any time to match the surface you are working with..
  • QUALITY MATERIALS: With a chrome-plated shank body and a hardened S2 steel tip, this corrosion-resistant wood-and-metal punch tool can withstand high-impact punches and force. The knurled, nonslip cap gives you a firm one-handed grip on the tool..
  • EASY ONE-HANDED USE: This one-handed automatic center punch needs only your hands—no hammer required. Use the S2 tip on a sturdy surface to center where you want the starter hole, and punch the tool downward to create the drill marker..
  • COMPACT SIZE: This automatic one-hand punch is small enough to fit in any toolbox or pocket. Carry it with you from job to job for a convenient and easy starter drill bit. You can also use this as a spring-loaded glass breaker for emergencies..
Check Stock

The Beadsmith EZ-Rivet 3/32' Rivet Tool Kit Punch-and-Flare Hollow Rivets, T-Bars, Piercing and Flaring Bases. Jewelry Supplies

  • RIVET PUNCH: Our screw puncher has a piercing base measuring 2.38 mm (3/32") in diameter..
  • DURABLE DESIGN: Our heavy-duty rivet puncher is made with hardened steel for making precision holes..
  • VERSATILE TOOL: Punch holes in metal up to 18 gauges for easy cold connections..
  • PERFECT HOLE: With the hole-punch rivet tool, get a perfect hole without deforming the materials..
  • PROFESSIONAL QUALITY: Our high-quality design punch is perfect for your jewelry-making kit..
Check Stock

Pocket Hole Jig Kit Woodworking Punch All-Matel Pocket Screw Jig with 3 Drilling Hole Tools

  • ✔Complete pocket hole jig kit system 1 * step drill bit (replaceable).
  • pocket screw M4 * 25mm screw color wooden pocket hole plug..
  • ✔Strong material-made of durable metal, it will not rust or crack. Easy to use for DIY and professional craftsmen will use this fixture kit to build their woodworking projects..
  • ✔Upgrade version Pocket Hole Jig with 48 PCS Aluminum Woodworking Punch Locator Tool..
  • ✔How to use: First, use a clamp to drill an inclined countersunk hole in one connector, and then screw the self-tapping screw (without pilot hole) into the other connector..
  • ✔Mini pocket hole fixture set, very suitable for DIY household projects or professional and general commercial use..
Check Stock

200 Sets 9.5mm Cone Spikes Metal Tree Spikes Screwback Studs for DIY Leathercraft Decoration Punk Rock Style Clothing Accessories (Silver)

  • 【You will receive】200sets metal cone spikes with screw. Size: 0.28inch x 0.39inch (7 x 9.5mm).
  • 【High quality material】 These cone spikes are made of high quality alloy with nickel plated surface, clear grain, smooth and burr-free.screws not easy to slip during rotation, even force and good tightening strength..
  • 【Easy to use】Coming with a hole puncher and screw driver, Just Need Punch a Hole and Screw on. Easy for you to install..
  • 【Widely used】 These cone spikes are suitable for DIY various craft decoration, as a fixed or decorative items used. For example: belt, bag, clothing, key bag nails, Shoes, Dog Collarsetc..
  • 【Note】When installing, the hole please do not exceed 3mm, if the hole is too large, it is easy to cause the screw to fall off..
Check Stock

ABN Hole Transfer Punch Set for Steel, Wood, Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in

  • ...emove the guesswork of where to place the center punch mark in a hole when transferring dead center from threaded, drilled, tapped, and reamed holes.
  • For toolmakers, machinists, fabricators, and hobbyists to use on metal, wood, and other surfaces.
  • Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
  • PERFECT SIZES: 4-7/8-inch (12.4cm) length of each punch with 0.0025-inch undersize for easy use.
  • Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”.
  • BUILT TO LAST: Constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped (cone) tips.
  • Flat ends are slightly chamfered at the edge.
  • We recommend using these pieces as transfer punches – not intended to take place of a center punch.
  • EASY TO USE: Select one of the punches, hold punch shaft with one hand while gently tapping a hammer (not included) on the flat ....
Check Stock

4PCS Automatic Center Hole Punch - 5.1 Inch Steel Spring Loaded Center Punch - Heavy Duty Hole Punch for Glass, Metal or Wood - Adjustable Impact Spring Loaded Puncher Tool with Non-Slip Body Surface

  • QUALITY MATERIAL: The automatic center hole punch tool is made of high-speed steel, which has high hardness, durability, and wear resistance. The body withstands high impact force and is corrosion resistant. Our small hole punch has a deeply knurled surface, which means that it will not slip and offer more precise handling and control..
  • PUNCH SIZE: In our package, you will get 4 automatic center punch. The measuring of the metal hole punch tool in length is 5.1-Inch and the diameter of the handle is 0.5 IN. This hole puncher tool is spring loaded with an adjustable stroke that can accommodate various types of materials such as wood, plastic, metal, glass, and leather for all your home improvement projects. Our hole punch steel is portable and easy to carry and store, and with a beautiful look..
  • EASY TO USE: The one-handed spring impact operation without a hammer. Simply adjust to desired spring tension, press firmly against the work piece for an auto center punch. Makes accurate marks to prevent the drill bit from running off..
  • SAFETY TOOL: Our hand punch tool has deep knurling on the surface, non-slip, not easy to rust.
  • damage, or break, and can serve you for a long time. The mini hole punch is designed with a removed rod. Punching, accurate marking, a....
Check Stock

Leather Hole Punch Tool Set, Revolving Punch Plier, Heavy Duty Rotary Puncher 6 Hole Multi Sizes Make for Belts, Watch Bands, Straps, Dog Collars, Saddles, Shoes, Fabric, DIY Home or Craft

  • ✂️【High Quality & Safety】The durable leather punch is made of plated steel that is high hardness and durability. The surface of metal deal with spray lacquer process to avoid oxidation. The brass pad adopts the thickness design to guarantee on safety..
  • ✂️【Perfect burr-free holes】The screw punches are made of high quality manganese steel, hard and durable.leather punch tool for belts includes a brass pad, small screwdriver, ruler to measure the hole, and a polishing rod for cleaning,Can make a lot of interesting leather works..
  • ✂️【Tools for newbies 】Comfortable and easy to use! Simply unlock it via a latch, rotate wheel to select hole size, align subject and then squeeze handles.Ideal for long, repetitive work without causing sore hands or blisters because the handles are cushioned, non-slip and ergonomic..
  • ✂️【Satisfaction Guaranteed】We are committed to providing high quality products and excellent service. If you have any question, don't hesitate to contact us.
Check Stock

Hole Punch 3/8 inch-10mm Single Hole Punch,Heavy Duty Hole Puncher Single,Paper Punch Portable Hand Held Long Hole Punch for Paper Cards Plastic Cardboard

  • Heavy Duty Single Hole Punch: Stamping type structure design Easily punched paper or PVC materials. You can use this paper hole punch to punch a clean 3/8 in round hole. Recommended that the thickness of the material to be punch does not exceed: PVC material 0.06in/1.5MM,Paper material 0.098in/2.5MM,Leather material 0.078in/2.0MM,A maximum of 15-20 A4 sheets can be punch at a time..
  • 1 Hole Punch:The center of the hole is exactly 1in/25MM from the edge.The overall size is about 5.10 x 3.54 x 0.78 inch,the size fits you in your hand and is easy to carry,you can use this easy-to-use tab punch anywhere..
  • Fixed Hole Position: you can clearly see where you want to punch the hole. Design with scale, can be adjusted to allow you to fix the location of the punch, easy and fast..
  • Badge Punch:Our hole puncher is made of zinc alloy with chrome plated surface to make it shiny and beautiful.The perforated punch is hardened by heat treatment, making it more sturdy and durable,no burrs when punching..
  • Strong Practicability:Can punch paper, cardboard, photos, business cards, ID cards, ban....
Check Stock

Scrapbook Papers 20 Double-Sided Prints 8” x 8” Non-Perforated Sheets Mardi Gras Edition: Crafting, Scrapbooking, Collage Arts Paper Book Package

  • ⭕【5 DIFFERENT SIZES CIRCLE PUNCH 】 Circle punch set comes wth 5 different size - Multi-size shape hole punch combined packaging provides more possibilities and creativity. Including 3/8 inch circle punch, 5/8 inch circle punch, 1 inch hole punch, 1.5 inch hole punch, 2 inch hole punch. Creating circle shape for your DIY crafts, scrapbooks, photo album and more..
  • ⭕【DURABLE AND STURDY PAPER PUNCHES】These paper hole punch are made of ABS material and aluminium alloy, internal spring device makes the circle hole punch easy and comfortable to use, easier to get a clear shape from cardstock or paper. Sliding cover at the bottom of the round punch can protect the blade and prevent you from cutting yourself. Also you can open the slider for more accurate cutting action, But please pay attention to safety, especially when children use it..
  • ⭕【CONVENIENT AND EASY TO USE】The craft hole punch is easy and comfortable to operate thanks to the strong and broad handle. Just place the paper into the circle paper punch slot and press the handle down once, you can get a clean cut round shape card, punches cleanly every time for consistently great designs..
Check Stock