Reviews Screw Cup Washer

Stainless Steel Finishing Washers #10 Cup Washers - 100 Pieces Countersunk Finish Washer Stainless Steel Countersunk Washers #10 Finishing Cup Washers

  • Stainless Steel Flange Cup Finishing Washer # 10.
  • DIMENSIONS: # 10 Finishing Washer | 1/4" Hole | 3/4" Outside Width.
  • Stainless Steel Finish Washer - 18-8 Stainless Steel for long life corrosion resistance.
  • Finish Washers are designed to accommodate the heads of a countersuck screw in order to provide a finished appearance.
  • Package of 100 pieces Stainless Steel Finishing Washers.
Check Stock

Laundry Detergent Cup Holder, Laundry Fabric Softener Soap Dispenser Drip Catcher, Firmly Hold on Laundry Bottle Spouts, Keep Washer, Dryer and Laundry Floor Clean and Organize, Pack of 2

  • Perfect Solution for Holding Cup and Catching Drips: This detergent gadget will hold detergent cup firmly and prevent detergent from dripping onto washer, dryer, or floor. No More Mess!.
  • Easy to Use: 1. Put the detergent holder on the laundry bottle spout.
  • 2. Tighten the screw to secure the detergent holder on the bottle spout..
  • Compatible: The detergent holder fits most economic sized detergent/fabric softener bottle spout, hold all measuring cup sizes, no more leaks..
  • Sturdy: The screw design and quality material make the detergent drip catcher strong and durable, once install on the laundry bottle spout, the holder will not move..
  • Clean&Organize: This soap dispenser cup holder solves the dripping problem, and provides a place to store detergent cup, and free of your hand to hold the cup. It makes your laundry space cleaner and more organized..
Check Stock

Kuryakyn 7657 Motorcycle Accessory: Receiver Hitch with 1-7/8\ Diameter Trailer Hitch Ball for 2014-19 Harley-Davidson Touring Motorcycles, Black/Chrome

  • ...) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
  • suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torque wrench.
  • This Kuryakyn part is most compatible with Harley: '14-'19 Electra Glides, Road Glides (except '19 FLTRXSE), Road Kings & Street Glides (except '15-'19 FLHXSE).
  • Will not fit with accessory Saddlebag Guard Rails P/N 90200561.
Check Stock

Hilitchi 295-Pcs [#4 - #16] Finishing Cup Countersunk Washer Assortment Set - 304 Stainless Steel

  • 【✔】High Quality 304 Stainless Steel Finishing Cup Washer Assortment Kit.
  • 【✔】Made of 304 Stainless Steel Material, Very Good Corrosion Resistance, It Can Be Used in a Humid Environment.
  • 【✔】Set Includes 7 Most Used Sizes: #4 #6 #8 #10 #12 #14 #16【Please See Picture 2 for Specific Dimensional Size】.
  • 【✔】Package Quantity: 295-Piece, All of Washers Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【✔】Prevents a nut, bolt or screw from pulling through the material, finish washers are designed to accommodate the heads of a countersuck screw in order to provide a finished appearance.
Check Stock

Hilitchi 304 Stainless Steel [#4 - #16] Finishing Cup Countersunk Washer Assortment Set - 160 Pieces

  • 【✔】High Quality 304 Stainless Steel Finishing Cup Washer Assortment Kit.
  • 【✔】Made of 304 Stainless Steel Material, Very Good Corrosion Resistance, It Can Be Used in a Humid Environment.
  • 【✔】Set Includes 7 Most Used Sizes: #4 #6 #8 #10 #12 #14 #16【Please See Picture 2 for Specific Dimensional Size】.
  • 【✔】Package Quantity: 160-Piece, All of Washers Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【✔】Prevents a nut, bolt or screw from pulling through the material, finish washers are designed to accommodate the heads of a countersuck screw in order to provide a finished appearance.
Check Stock

TOUHIA 50pcs #8 Finishing Washers Stainless Steel Cup Countersunk Washer

  • Package Content: 50pcs x Finishing Cup Washers.
  • Finish Washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance.
  • Countersunk washer can prevent a nut, bolt or screw from pulling through the material. Commonly used in automotive, pipe, and other electrical applicance.
  • Material: These finish washers are 100% Stainless Steel, corrosion resistant and rust resistant, can be used for a long time.
  • Risk Free Shopping: TOUHIA offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

H&H M2 Countersunk Washers,Aluminium Alloy,PK20,Wine Red

  • 20 pcs Drone Countersunk Cup for M3 screw.
  • M3 Special countersunk washer for your DIY Drone, make your FPV frame more unique and popular.
Check Stock

BAYTORY Upgrade Glass Rinser for Kitchen Sink, Faucet Bottle Washer for Bar, Cup Cleaner Anti-rust ABS Black Rinsing Sinks Accessories

  • Wide Range of Uses: No matter what shape or material of the cup, it can almost be easily washed, such as commonly used wine glasses, beverage cups, milk bottles and water bottles..
  • Efficient Work: Compared with the traditional way of washing cups, this cup washer can reduce the time of soaking and scrubbing for you, and the multi-angle flushing hole design can flush every corner of the cup..
  • High-quality Materials: The base of the cup washer is made of hard ABS material, and the cup washer is made of pure copper. Corrosion resistance, no rust, longer life.
  • How to Use: Compared with the traditional way of washing cups that need to be washed, you only need to face down the mouth of the stained cup, gently press the bottom of the cup, and you can use the cup washer to spray water to easily rinse your cup..
  • Installation Tips: There must be at least 2 inches of space around the mounting holes, and the distance from the center of the hole to the edge of the sink does not exceed 2.25 inches, so that the cup washer can work properly..
Check Stock

YBB Steaming Pitcher Rinser, Glass Cleaning Rinser for Bar Cafe Pan Dimensions Rinser with Base (7.1

  • [Portable] Compact and light, you could put it anywhere! Easy to save and reuse..
  • 1. Put filter in the hole on the buttom of the washer/pitcher rinsers.
  • 2. Screw back the connect to the above hole and screw another connect to the faucet..
  • pull glass/cup up and down or rotate it. The brush will clean the interior and exterior of the glass clearly..
  • 2. Put glass/cup into the spray container, water will spray 360to clean the interior and exterior clearly. Water will stop automatically when cup is moved away. And the wasted water will flow from the drain hole on the bottom..
  • 3. Dry the cup/glass with towel or put it on the shelf..
  • 1x Glass Rinser (including stainless steel square pool).
Check Stock

Faucet Glass Washer, Kitchen Sink Accessories, bar Glass Washer, Coffee Pot, can Clean All Kinds of Cups Very Quickly (Black)

  • POWERFUL SPRINKLER，EASY CLEANING: Yongyoung 4th generation cup washer is a powerful sprinkler that is easy to clean. Its strong spray easily removes dirt and debris from cups and other small items..
  • HIGH-QUALITY MATERIALS，COATED WITH ANTIRUST MATERIALS，: Yonyoung cup washer is made of high-quality materials, coated with antirust materials, and is durable and reliable..
  • Suitable for cleaning all kinds of cups: from baby bottle to travel cup to wine cup, it can easily rinse almost any drink, allowing you to clean the cup quickly and thoroughly.
  • EASY TO USE，: The cup washer is a small, easy-to-use device that helps clean cups. It features a simple design that makes it easy to use, and it comes with a built-in scrubber that helps remove dirt and grime from cups..
  • EASY INSTALLATION OF STAINLESS STEEL: This cup washer is made of stainless steel for easy installation..
Check Stock

XINGYHENG 180Pcs 4Kinds 304 Stainless Steel #6#8#10#12 Stainless Steel Cup Countersunk Washer Assortment Kit Silver Finishing Cup Washer with A Clean Plastic case

  • A SET OF CONVENIENCE TOOL: These countersunk washer is made of 304 Stainless Steel. Corrosion resistant galvanized finish, Stable and long life, non-pollution. It is a convenient accessory for your tool kit, which is very suitable for the maintenance of accessories. The compact and portable design will bring you more convenience and fast..
  • MULITE SIZE: Mode include #6 #8 #10 #12, total 180pcs. Compete sizes meet your all requirements. Finish washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance.  Prevents the screw from pulling through the material..
  • UNIQUE DESIGN: Stainless steel cup countersunk washer are available in 4 common sizes for convenient, all-around and multi-sided classification kits, making them ideal for use, easy to lock, , non-isosceles, easy to operate, standard size, not easy to slip , more convenient and quick to use..
  • THE HIGH QUALITY WASHERS: These washers are corrosion resistant, durable. Stainless steel with superior rust resistant ensure long lasting results..
  • WIDELY USE: Widely used in manual DIY production, robots, aircraft, 3D printing equipment, communication equipment, petrochemical industry, marine power facilities, architecture and other fields..
Check Stock

waybeyondframe Color: Purple - License Plate Screws -Stainless Steel, Set of 4 Fasteners for Front or Rear Plates, Frames Covers on Car, Truck, SUVs Rustproof, Self Tapping and M6 Aluminum caps

  • DURABILITY: Come with 4 aluminum metal twist on screw caps, you can either insert the metal washer for dry weather condition or insert the plastic washer for snowing or bay area weather condition.
  • RUSTPROOF: This set of fasteners includes 8 stainless steel 4 slotted hex-head screws with a 1/4 inch (.25") diameter and 9/10 inch (.9") long self tapping shank. 4 M6 metric 21mm long screws They are perfect for the front or back license plate and frames or covers of most cars..
  • EASY INSTALLATION: We designed these license plate mounting screws to be durable and easy to install. Insert base washer with the screw and make sure tighten the screw so the washer cant be move. After that twist on screw cap cover.
  • COMATIBILITY: Standard License Plate Screws That Fit Most Domestic Cars & Trucks License Plate Holes That Use Nylon/Plastic Retainer, if is metal threaded holes use the M6 screws.
  • This is the most completed set screw caps fasteners on the market. License frame in any image are not included, this is for the fasteners and screw cap covers only.
Check Stock

waybeyondframe Color: Neo Chrome - License Plate Screws Stainless Steel, Set of 4 Fasteners for Front or Rear Plates, Frames Covers on Cars, Trucks, SUVs Rustproof, Self Tapping and M6 Metal caps

  • DURABILITY: Come with 4 anti-rust metal twist on screw caps, you can either insert the metal washer for dry weather condition or insert the plastic washer for snowing or bay area weather condition.
  • RUSTPROOF: This set of fasteners includes 8 stainless steel 4 slotted hex-head screws with a 1/4 inch (.25") diameter and 9/10 inch (.9") long self tapping shank. 4 M6 metric 21mm long screws They are perfect for the front or back license plate and frames or covers of most cars..
  • EASY INSTALLATION: We designed these license plate mounting screws to be durable and easy to install. Insert base washer with the screw and make sure tighten the screw so the washer cant be move. After that twist on screw cap cover.
  • COMATIBILITY: Standard License Plate Screws That Fit Most Domestic Cars & Trucks License Plate Holes That Use Nylon/Plastic Retainer, if is metal threaded holes use the M6 screws.
  • This is the most completed set screw caps fasteners on the market. License frame in any image are not included, this is for the fasteners and screw cap covers only.
Check Stock