Reviews Scope For Savage Axis 223

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles |20 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the old Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the new Post 9/2021 compatible mount..
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

U.S. Rifles, Cal. .30, M1903, M1903A1, M1903A3 and M1903A4: TM 9-1270 Ordnance Maintenance

  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms with integrated level bubble. Comes with both #6 and #8 screws for compatibility with both older and newer Savage Axis models..
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Dual Ring Scope Mount for Savage Arms Axis/Edge Rifles | 1 Inch Diameter | Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the Post 9/2021 compatible mount..
  • Dedicated one piece dual ring scope mount built specifically for the Savage Arms Axis/Edge platform.
  • 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Picatinny Rail Scope Mount for Savage Edge/Axis/Axis 2 0 MOA

  • Savage Edge/Axis/Axis 2 Picatinny Rail Scope Mount 0 MOA.
Check Stock

EGW Picatinny Rail Scope Mount for Savage Edge/Axis/Axis 2 20 MOA

  • Savage Edge/Axis/Axis 2 Picatinny Rail Scope Mount 20 MOA.
Check Stock

Wheeler 1-Piece Bolt Action Scope Mount - 30mm High Scope Mount for Remington 700 Long Action Rifles - 6-Hole Design with Integral Rings and Anti-Cant Indicator for Leveling and Shooting

  • SPECS: This Wheeler 1-piece bolt action scope mount with 30mm rings in high height is compatible with Remington 700 long action rifles. Base features 6-40 threads.
  • ACCURATE: Finding the right height can help make your rifle more accurate. With 20 MOA, Wheeler 1-piece bolt action scope bases help zero in sights for shooting long distances..
  • CONVENIENT: Installation is easy with a 1-piece scope base. The flip-down anti-cant device can be posted on the front or rear ring to ensure a level mount..
  • DURABLE: A 6061 aluminum matte black base makes for a solid, yet lightweight design. Clamping force is increased with a 6-hole ring design..
  • EXPLORE: Caldwell offers a variety of 1-piece scope bases, including: Remington 700 short action, Remington 700 long action, Savage 10, and Savage 110 models..
Check Stock

CBE Vertex Elevate Target Sight, Black

  • Center pivot 1st, 2nd, and 3rd axis adjustments.
  • Scope tube locating collar to ensure scope is placed in the exact same position after travel.
  • Enhanced quad track elevation support for smooth and stable adjustments.
  • Zero backlash .002" per click windage and elevation adjustments.
  • 24 turn / 20 click windage and elevation.
  • Interchangeable sight scales can be mounted on either side of the elevation bar.
Check Stock

BSA Optics Sweet 223 AO 4-12X40, Black

  • 4-12x40 sweet series 223 adjustable objective rifle scope.
  • specifically designed for the .223 catridge.
  • 3 ballistically calibrated turrets for 40gr, 55gr, and 62gr rounds.
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Short Action | 0 MOA

  • Picatinny rail mount built specifically for Short Action Remington 700 rifle platforms.
  • Compatible with Short Action Remington 700 models only including: 223 Remington | 243 Winchester | 308 Winchester | 6.5 Creedmoor | 7 mm Remington Mag | 7 mm-08 Remington | 257 Weatherby Mag | 270 WSM | 22-250 Remington |300 Remington Ultra Mag | 300 AAC Blackout | 220 Swift.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Astromania Deluxe Off-Axis Guider for Astrophotography

  • The new Astromania Off Axis Guider is the lowest profile off axis guider that we know. Despite this no compromise has been made with the function and operating comfort of this versatile Off Axis Guider. mechanical flexure between main and guiding telescope can possibly ruin the tracking accuracy if you use an off axis guider..
  • 1) Can be used with correctors & DSLR: The only Off Axis Guider that can be used between a coma corrector (or field flattener) and a DSLR camera without leaving the tolerance for the distance between camera and corrector. 2) Can be used with cooled CCD cameras: The off axis guider provides enough space for filter wheels or filter drawers when using cooled CCD cameras..
  • Place the OAG behind the corrector: The Astromania OAG is used between the corrector and the camera. Using an off axis guider in front of the corrector is not useful. The guide star would be distorted, the distances on both optical paths are too different and you might even get focusing problems with the main camera. Behind the corrector you can avoid these problems, but this only works due to he low profile of the Astromania OAG!.
  • Large Clear Aperture: Compared with many simpler guiders the Astromania OAG not only has a shorter overall length, but also a larger cle....
Check Stock

Astromania Deluxe Off-Axis Guider for Astrophotography

  • The new Astromania Off Axis Guider is the lowest profile off axis guider that we know. Despite this no compromise has been made with the function and operating comfort of this versatile Off Axis Guider. mechanical flexure between main and guiding telescope can possibly ruin the tracking accuracy if you use an off axis guider..
  • 1) Can be used with correctors & DSLR: The only Off Axis Guider that can be used between a coma corrector (or field flattener) and a DSLR camera without leaving the tolerance for the distance between camera and corrector. 2) Can be used with cooled CCD cameras: The off axis guider provides enough space for filter wheels or filter drawers when using cooled CCD cameras..
  • Place the OAG behind the corrector: The Astromania OAG is used between the corrector and the camera. Using an off axis guider in front of the corrector is not useful. The guide star would be distorted, the distances on both optical paths are too different and you might even get focusing problems with the main camera. Behind the corrector you can avoid these problems, but this only works due to he low profile of the Astromania OAG!.
  • Large Clear Aperture: Compared with many simpler guiders the Astromania OAG not only has a shorter overall length, but also a larger cle....
Check Stock

223 Laser Bore Sight Red Dot in-Chamber Cartridge ✮ .223 REM / 5.56 Red Dot Laser Sighter ✮

  • NOW INCLUDES 2 SETS of BATTERIES - Sighting in a scope with our laser bore sighter is easy and efficient with our 223 laser bore sight. Just place the....
  • CALIBER SPECIFIC- This 223 laser bore sight kit is designed to work for both the novice and professional alike. Will work with both the 223 and 5.56....
  • HIGH QUALITY BRASS - Machined brass using the highest quality manufacturing techniques. Guaranteed to fit perfectly in your chamber. Re-sealable....
  • FAST ZEROING, SIGHTING - Designed for fast gun zeroing and sighting - Sighting range 15 to 100 yards – Recommended laser bore sight distance is 25....
  • LIFETIME WARRANTY ✮ Backed By GoZier Tactical LIFETIME Warranty ✮.
Check Stock

Primary Arms SLX 4-14x44mm FFP Rifle Scope - ACSS-Orion

  • Variable 4-14x magnification first focal plane scope features the ACSS Orion reticle for .308.223 -06.
  • ACSS Orion reticle features quick ranging and wind holds for hunting deer and coyote sized targets.
  • Waterproof, shockproof and nitrogen purged with a durable aluminum scope body.
  • Covered by a 3 year warranty for defects due to materials or workmanship.
Check Stock