Reviews Saw Blade For Vinyl Plank Flooring

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

EAB Tool 2100010 EAB Tool Professional Floor Cutter, 13", Black

  • Bonus installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Cuts laminate flooring, wood flooring and engineered flooring up to 15 mm (5/8"), vinyl tile, pressboard siding and fiber cement siding such as hardier plank.
  • Angle gauge allows for cuts up to 45 degrees.
  • Quiet, dust free operation, No electricity required.Replaceable blade 2100011 can be re-sharpened with included sharpening stone.Installation Kit: tapping block, Wedge SPACER, pull bar and double-sided honing stone.Ships to the US only.Professional level.
Check Stock

Pewter Flasks and Potato Salad

  • The MARSHALLTOWN Ultra-Lite Flooring Cutter 9" is essential for your next vinyl, laminate, or engineered hardwood flooring installation..
  • Cuts products up to 9" wide, 12 mm thick, and a Janka hardness of 1200..
  • At 14 pounds, this handy shear allows you to cut where you work without dust, noise, or electricity..
  • Unique features include an integrated handle for easy, single hand carry..
  • Flooring Cutter, laminate cutter, laminate flooring cutter, vinyl floor cutter, guillotine laminate floor cutter, laminate cutter tool, vinyl flooring cutter, vinyl plank flooring cutter, vinyl plank floor cutter, vinyl flooring cutter,.
Check Stock

MantisTol 13 Heavy duty Vinyl floor cutter LC-330,For WPC,LVT,VCT and Rigid Core Vinyl Plank.

  • Design for cutting LVP, WPC, LVT, VCT,PVC,SPC,Vinyl Plank Flooring. It can't cut Laminate,Engineered floor or other hard plank .So don't try to cut....
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle....
  • 3mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade....
  • If you find that you need a lot of force during the cutting process, need to repair the sharpness of the blade. Replacement....
Check Stock

ROBERTS 10-95 Cutter for Laminate, Engineered Wood, Carpet Tile, and Vinyl Floors, 25 in.

  • Guillotine-style cutter, cuts vinyl plank flooring, vinyl siding, VCT, LVT, WPC, Allure, laminate, engineered wood, carpet tile, MDF baseboard, rubber tiles and foam tiles.
  • Cuts flooring up to 25 in. wide, 17 in. diagonal and 5/8 in. (16 mm) thick.
  • Long-lasting 25 in. tungsten steel blade features a sharp cutting edge.
  • Swivel miter guide for 45-degree angle cuts.
  • Extruded aluminum support base with a comfortable, solid plastic working area.
Check Stock

8 Laminate & Vinyl Plank Cutter LV-210 For laminate floor/LVT/VCT/LVP/PVC/SPC/WPC/Vinyl Plank.

  • For Laminate /LVT/VCT/LVP/PVC/SPC/WPC/ Vinyl Plank..
  • Width of Plank Cutting:210, 300 (mm) / 8,12 (inch)..
  • It can also make "L" Cutting, free angle cuts and lengthwise cuts(For Soft vinyl floor)..
  • The cutter has a movable V support, which can be used to keep the board level and cut at the same time..
  • No dust, No noise, No electricity needed, Easy and Professional , Save time，Much safer than a saw blade..
Check Stock

MantisTol LVP-231 8.9' Vinyl Plank Cutter ，for LVT/VCT/LVP/PVC/WPC/Rigid Core.

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor. The blade of our LVP-230 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners，most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time to accompany your family！.
  • Straight cut, Angle cut, Notch cut, Rip cut and more . Clearly marked measuring guide. 0-45° Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it！.
  • 2.2mm thick 9” length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service life，this is a man-made damage and is not covered by the warranty! Or replace blade..
  • If you received the cutter that cuts less than 8mm thick, please remove the blade, clean....
Check Stock

MantisTol 20-inch Pro Flooring Cutter MC-510,For Laminate Carpet tile Siding,Rigid Core Vinyl Plank and more；You are worth buying！

  • For Laminate, fiber-cement siding,MDF, Rubber, Carpet tile, LVT, VCT, LVP, SPC, PVC, WPC tile & plank, Vinyl Flooring and more, up to 510mm (20”)....
  • The max. cutting length: 510 mm (20 "), and max. cutting depth: 16 mm (5/8 ").Angle Cutting: 0-45,it will cut at 45 degrees on a 14 inch plank..
  • A shear blade , included a 600 Grit oilstone to keep sharp..
  • Straight cut and 45 degree angle cut. Clean and Straight cutting edg.（Fingers away from the sharp blade!）. No electricity, no dust, quick, quiet....
Check Stock

DIY Vinyl Flooring

  • How to lay self stick adhesive vinyl tile flooring.
  • How to make your own painted vinyl floor cloth.
Check Stock

Congoleum Bright 'N Easy No-rinse Cleaner (Concentrate), Gallon

  • How to lay self stick adhesive vinyl tile flooring.
  • How to make your own painted vinyl floor cloth.
Check Stock

EAB Tool 2100007 13' Laminate Floor Cutter with Installation Kit

  • BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8″). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8″). will also cut fiber cement siding such as hardy plank.
  • Angle gauge allows for cuts up to 45 degrees.
  • Quiet, dust free operation, No electricity required.
Check Stock

EAB Tool Exchange-a-Blade 2100005 9-Inch Laminate Flooring Cutter

  • BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8"). will also cut fiber cement siding such as hardier plank.
  • Angle gauge allows for cuts up to 45 degrees.
Check Stock

MSI Katalina 6 inch x 48 inch Glue Down Luxury Vinyl Plank Flooring for Pro and DIY Installation 2MM Thick and 6MIL Wear Layer

  • LUXURY VINYL FLOOR TILES: For use indoors and in temperature-controlled environments only, MSI brings adhesive flooring up a notch with Glue-Down floor planks – stylish at the surface with the authentic look of real wood plank flooring..
  • SCRATCH & ABRASION RESISTANT: 2MM Thick and 6MIL Wear Layer, Scratch- Stain- and Dent-resistant, backed by a Limited Lifetime Residential, 10 Year Light Commercial, 5 Year Commercial Warranty.
  • WATER RESISTANT & EASY CLEAN: Super easy to clean, tiles are water resistant. Life in the family lane is busy. Our Vinyl flooring products are low-maintenance..
  • WOOD-GRAIN TEXTURE Achieve the look and feel of natural wood flooring with MSI’s DIY Glue-Down planks. Natural wood grain - color finish offers the authentic look of real wood plank flooring.
  • EASY TO INSTALL: Can be installed Above grade, On grade, or Below grade. Simply apply pressure sensitive adhesive and glue down to practically most existing surfaces including wood, tile, stone, concrete and Vinyl. Each tile measures 6 inch x 48 inch.
Check Stock