Reviews Saw Blade For Hardie Board

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

SHALL Fiber Cement Siding Shear 4.8-Amp Hardie Board Cutter with 360 Degree Swivel Head Variable Speed & Continuous Cutting for Cutting Cement Board Tile Board Backer board 2700 SPM

  • Clean cut: Double cut design for creating a 5/16” curled thin strip during operation by the double-cut blade. Compared with manual saw and grinder....
  • 360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer....
  • Variable speeds: Speed (0-2700 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For....
  • Cutting capacity: Max cutting capacity is 5/16” (8 mm) and minimum cutting radius is 10”. In addition, applicable for cutting cement board, hardie....
  • Continuous cutting: The lock-on button can be used to lock the trigger switch ON at its fastest speed for users to reduce finger fatigue. For....
Check Stock

SHALL 5/16” (8 mm) Fiber Cement Siding Shear Blades Replacement Set, for Shall Electric Fiber Cement Siding Shear (SH111007AE), Clean Cut for Cement Board, Tile Board, Backer board

  • Product dimension: Left blade & right blade: 4-7/8” X 3/14’’ (12.5 cm X 1.9 cm).
  • center blade: 5-5/8’’ X 2’’ (14.3 cm X 5 cm).
  • hex bolts length: 1-7/16’’ (3.6 cm). Compatible with SHALL (SH111007AE) and other electric fiber cement siding shear that have the same structure and size of cutter head.
  • Cutting capacity: Cutting up to 5/16” (8 mm) cement board, tile board, backer board and etc. In addition, applicable for cutting cement board, hardie backerboard, shower backerboard, waterproof backerboard and so on. Multi-functional, meeting most of your cutting needs.
  • Double-cut blade: Double cut design for creating a 5/16” (8 mm) curled thin strip, delivering fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, this replacement’s advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
  • Premium material: Blades are made of superior alloy steel, anti-rusting. Heat-treated: 55-60HRC. High strength bolts (Specification: M5, Strength: 12.9).
  • What including: 3 blades (left blade, center blade, right blade), 2 bushings, 3 head bolts.
Check Stock

KingTool 3 in 1 Multi Blade Hand Saw - 12-Inch Solid Frame Hacksaw, 14-Inch Universal Handsaw and 10-Inch Standard Utility Saw

  • KingTool 3 in 1 hand saw including 12-Inch solid frame hacksaw blade, 14-Inch universal handsaw blade and 10-Inch standard utility saw blade, and a shared handle for cutting a plastic, metal, pipe, particle board, and wood..
  • The installation is easy and simple, and the saw blade can be installed in 3 seconds at the fastest. Ergonomically designed bi-material handle for comfort and control..
  • Solid Frame Hacksaw - A 24inch teeth Bi-Metal hack saw blade and a 18 teeth hack saw blade are included in this 3 in 1 saw set. Adjustable flush cuts at 90° and 180° angles.
  • Universal Handsaw - A 14”/355mm 7TPI/8TPI universal handsaw blade is included in this 3 in 1 hand saw set..
  • Standard Utility Saw - A 10”/255mm 7TPI/8TPI standard utility saw blade is included in this 3 in 1 hand saw set.Each saw features Tri-Ground teeth to give you fast, efficient cuts.
Check Stock

DEWALT ATOMIC 20V MAX* Circular Saw, 4-1/2-Inch, Tool Only (DCS571B)

  • Brushless motor of DEWALT circular saw allows you to cut up to 369 linear feet of 3/4-inch OSB using DCB205 battery (sold separately).
  • The cordless circular saw has the removable auxiliary handle for increased control.
  • The compact circular saw has a hang hook for increased convenience.
  • On-board blade key storage for hassle free blade changes.
  • 1-1/2-inch finger trigger allows users to choke-up on tool if necessary for their application.
  • Bevel gear allows users to cut 2x material at 90 degrees with a 4-1/2-inch blade.
  • Electronic blade brake stops blade quickly for safety and productivity.
  • Bevel lever gives user the ability to bevel at 45 degrees to cut 1x dimensional lumber.
Check Stock

Ships Within 1 Biz Day from NV - Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8” Dia for 6 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8” Dia for 4 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board - Ships Within 1 Biz Day from NV

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Saw Blade Bushing Set Saw Blades Adapter Ring Aperture Conversion Gasket , 1Inch to 20mm, 1inch to 5/8Inch, 7/8Inch to 5/8Inch, 20mm to 5/8Inch, 5/8Inch to 1/2inch, 1.25Inch to 7/8Inch, Pack of 12

  • In layman's terms, the inner hole of the saw blade is larger. For saw blade clamping plate and electric saw clamping, the hole is larger, so we need to use washers to reduce the diameter! Saw blade reducing ring, inner hole switching ring, saw blade inner hole switching reducing ring, it is convenient to use with saw blade splint, electric grinder and electric saw..
  • Main specifications: Outer diameter-inner diameter 5/8Inch to 1/2inch, 0.78Inch to 5/8Inch, 7/8Inch to 5/8Inch, 1inch to 5/8Inch, 1.25Inch to 7/8Inch, 1Inch to 0.78Inch. Washer thickness: about 1.2-1.3mm, the washer should be the same thickness as the saw board of the saw blade, or a little thinner for more stability..
  • Usage description: adapters to mount brush cutter blade to echo trimmer. These did the trick to center the blade to the trimmer. Used for adjustment and conversion of alloy saw blades and other mounting holes becoming smaller. It is suitable for saw blade/marble blade inner hole conversion, angle grinder and cutting machine..
  • 12pcs Saw Blade Bush / Spacer, Saw Blade Bushing Washers, There are two pieces of each size, Total of 12 pieces.
  • VIP after-sales service guarantee: fast refund and exchange. Professional delivery facilities and professional delivery personnel will prevent ....
Check Stock

Freud D0704DH Diablo 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw BLD,5/8 Arbor (Single Pack)

  • Application: The 24T wood blade is suitable for all types of wood, plastic, particle board, MDF, hardboard and plywood cutting. The HSS metal blade best for aluminum, wood, PVC, and other non-ferrous thin sheet. The diamond blade is structured to be able to cut concrete, roof tiles, blocks, bricks, granite and all other tiles without any hassle.
  • High Quality: The tungsten carbide tipped blade and diamond tipped blade are made of excellent high grade quality steel material that makes it a robust, the HSS blade is made of high-speed steel, more durability.
  • Cut Smooth: Sharp saw blade cutters with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
  • Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of  3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
  • What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
  • saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5m....
Check Stock

Diablo by Freud Diablo DOU5S 5 pc Universal Fit General Purpose Oscillating Blade Set (5-Piece)

  • What You Get: Why pay $10-$20 per blade? JANCHI saw blades match & exceed name-brand quality at a fraction of the price. 4 Pack Combo 4-1/2 Inch Compact Circular Saw Blade Set with 3/8" Arbor. 2 pack 24T TCT blade for wood, 1 pack 60T HSS blade for sheet metal, 1pack 60# diamond disc for tile, meet your everyday needs..
  • 24T TCT BLADE: Manufactured with durable premium alloy steel material, with hardened,fully polished and chrome plated surface, sharper construction-grade tungsten carbide teeth, for long-lasting cuts in wood, plastic, and composite materials..
  • 60# DIAMOND DISC: Manufactured with high quality and durable heat-treated manganese steel and #60 diamond grit can provide longer cutting life.The segmented design improves airflow, helps the saw blade to dissipate heat, and remove cutting dust, provides a smooth, fast, clean and efficient cutting, Max 13,000 RPM, ideal for cutting ceramic tile, stone tile, backer board and cement..
  • 60T HSS BLADE: Manufactured with high-speed steel, more durability.Sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results. Ideal for thin sheet metal and aluminuim , wood, plastic and drywall..
  • COMPATIBLE:These circular saw blades are compatible to use with electric circul....
Check Stock

3Pack Combo 7-1/4 Inch Circular Saw Blades with 5/8\ Arbor, TCT ATB 24T Framing, 40T Crosscutting, 60T Finish Saw Blade for Various Wood Cutting

  • DIMENSIONS - Includes 1pc 7-1/4 Inch 24T Framing Saw Blade, 1pc 7-1/4 Inch 40T Ripping & Cross Cutting Saw Blade, 1pc 7-1/4 Inch 60T Finish Saw Blade, 5/8 inch Arbor, with a nice storage case..
  • DURABLE: OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life..
  • EFFECTIVE: Incorporates an ATB (Alternating Top Bevel) offset tooth design, sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results..
  • APPLICATING: General purpose Hard & Soft wood cutting saw blade. for long-lasting cuts in plywood, chipboard, multi-board, panels, MDF,plated&counted-plated panels, laminated&Bi-laminate plastic, and FRP..
  • COMPATIBILITY: Can used in corded and cordless circular saws, miter saw and table saw..
Check Stock

16pcs Saw Blade Bushing Set Saw Blade Adapter Ring, Angle grinder inner aperture conversion gasket，1 Inch to 20 mm, 1 Inch to 5/8 Inch, 7/8 Inch to 5/8 Inch, 20 mmto 5/8 Inch,4 per Model

  • Main specifications:003cbr003e 1" - 20mm ,003cbr003e 1" - 5/8" ,003cbr003e 7/8" - 5/8" ,003cbr003e 20mm - 5/8" 003cbr003e..
  • Washer thickness: about 1.2-1.3mm, the washer should be the same thickness as the saw board of the saw blade, or a little thinner for more stability..
  • For saw blade clamping plate and electric saw clamping, the hole is larger, so we need to use washers to reduce the diameter! Saw blade reducing ring, inner hole switching ring, saw blade inner hole switching reducing ring, it is convenient to use with saw blade splint, electric grinder and electric saw..
Check Stock

GALAX PRO Saw Blade Set, Pack of 4 Assorted 60T HSS Metal/24T TCT Wood/Diamond 4-1/2-Inch Circular Saw Blade with 3/8\ Arbor for Fast Cutting…

  • Application: The 24T wood blade is suitable for all types of wood, plastic, particle board, MDF, hardboard and plywood cutting. The HSS metal blade best for aluminum, wood, PVC, and other non-ferrous thin sheet. The diamond blade is structured to be able to cut concrete, roof tiles, blocks, bricks, granite and all other tiles without any hassle.
  • High Quality: The tungsten carbide tipped blade and diamond tipped blade are made of excellent high grade quality steel material that makes it a robust, the HSS blade is made of high-speed steel, more durability.
  • Cut Smooth: Sharp saw blade cutters with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
  • Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of  3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
  • What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
  • saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5m....
Check Stock