Reviews Sata Raid

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

DiLinKer OCuLink SFF-8611 to PCIE SFF-8639 U.2 NVMe with Power Cable 1M

  • Create high-performance storage with configurable RAID by installing two M.2 SATA SSDs into a 2.5 SATA interface.
  • Dual-Slot M.2 to SATA Adapter supports multiple RAID modes: RAID 0 / RAID 1 or spanning or JBOD.
  • Supports B key M.2 SATA SSDs including full-length M.2 SSD drives (2230 / 2242 / 2260 / 2280) (Not compatible with M.2 NVMe or AHCI PCI-Express SSDs).
  • TRIM support to enhance the stability and performance of your M.2 SSDs plus provides SMART support.
  • M.2 Adapter / M.2 SSD Adapter / M.2 SATA Adapter / Dual M.2 to SATA Adapter / M.2 Drive to SATA Adapter / Dual SSD Adapter / M.2 SATA SSD / m 2....
Check Stock

Cable Matters Internal Mini SAS to Mini SAS Cable (Mini-SAS to Mini-SAS Cable) 3.3 Feet, 1m

  • MULTILANE MINI SAS DATA CABLE directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation.
  • Internal, multilane cable with Mini SAS 8087 connectors is used for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server.
  • LEVERAGE RAID CONTROLLER PERFORMANCE with this straight, 4-lane, high performance internal Mini SAS 4i cable.
  • Supports SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays.
  • DIY OR IT PRO INSTALLERS both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs.
  • 3 foot mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces and provides sufficient length for internal cable management.
  • Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane.
  • Ideal component of a professional SAN network.
  • ROBUST DESIGN of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connect....
Check Stock

Internal Mini SAS SFF-8087 to Mini SAS SFF-8087 Mini SAS Cable, 1.8 FT / 56 cm

  • Multilane Mini SAS data cable directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation.
  • Internal, multilane cable with Mini SAS 8087 connectors is used for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server.
  • Leverage RAID controller performance with this straight, 4-lane, high performance internal Mini SAS 4i cable.
  • Supports SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays.
  • DIY or IT pro instrallers both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs.
  • Mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces.
  • Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane.
  • Ideal component of a professional SAN network.
  • Robust design of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connection.
  • SFF-8087 host compatible with popular controller HBA cards such....
Check Stock

High Point RocketRAID 640L Internal 4 SATA Port PCI-Express 2.0 x4 SATA 6Gb/s RAID Controller -Lite Version

  • Bios boot to RAID with point-to-point connectivity or through port Multiplier.
  • Quick, background or foreground initialization.
  • Oce/orlm (online capacity expansion/online RAID level Migration).
  • Supports up to 4 SATA 6Gb/s and 3Gb/s HDD/SSD.
  • Driver support for Microsoft Windows 7, 2008, Vista, and Linux distributions.
Check Stock

StarTech.com M.2 to SATA Adapter - Dual Slot - for 2.5in Drive Bay - RAID - M.2 SSD - M.2 Adapter - M.2 SSD Adapter (S322M225R)

  • HIGH PERFORMANCE: Create a high-performance storage solution by installing up to two M.2 SATA SSDs into a 2.5" SATA adapter with RAID support for JBOD, SPAN, RAID 0, and RAID 1.
  • HASSLE-FREE SETUP: Open-frame steel mounting bracket with 2.5" SATA form factor fits in any 2.5" SATA bay that supports 7mm tall 2.5" drives. Easy to install with all necessary hardware incl. (M.2 drives and screwdriver not incl.).
  • WIDE COMPATIBILITY: Supports B & B+M key SATA M.2 SSDs in 2230/2242/2260/2280 form factors. Supports SATA I, II, and III (up to 6 Gbps) TRIM, and SMART. M & B+M key NVMe or AHCI PCI-e M.2 SSDs not supported (only SATA supported)..
  • TRIM SUPPORT: TRIM support enhances the stability and performance of your M.2 SSDs plus it provides SMART support. TRIM supported in JBOD and RAID 1, SMART only supported in JBOD..
  • NOTE: Before purchasing this product or your M.2, please confirm if it is a SATA type, via manufacturer specifications/support.
  • if you intend to use JBOD (don't intend to use RAID) then make sure that your SATA port/controller supports Port Multiplier..
Check Stock

Intel Integrated RAID Module Storage Controller RMS25KB040

  • This RAID controller has four internal SAS/SATA ports and uses a x8 or wider PCI Express* server board slot.1.2 Operating System Support Supports SAS/SATA devices at speeds up to 300 MB/second per port Supports the SATA II protocol over SAS transp.
  • Contains four internal SAS/SATA ports Supports up to 8 SAS/SATA II devices via expanders Supports up to 64 virtual disks Supports up to 8 arrays Supports RAID levels 0, 1, 5, 6, 10, 50, and 60 Hardware exclusive OR (XOR) assistance.
  • Online capacity expansion Online RAID level migration Physical drive roaming RAID controller migration Fast virtual drive initialization Hot-spare drive configuration, both private and global.
  • SATA drive hot-plug Staggered spin-up Native command queuing Support for SMART* Auto rebuild Variable data stripe size configured per virtual drive.
  • 128 MB of ECC DDR2 667 MHz SDRAM integrated on the controller Read and write cache policy SES2 intelligent enclosure support PCI hot-plug support Background media test (patrol read) Background data integrity test.
Check Stock

StarTech.com Dual M.2 SATA Adapter with RAID - 2x M.2 SSDs to 2.5in SATA (6Gbps) RAID Adapter Converter with TRIM Support (25S22M2NGFFR) Black/Silver

  • Install two M.2 SSDs into a 2.5” bay to create high-performance storage with configurable RAID.
  • Dual M.2 SATA adapter with RAID supports SATA I/II/III (up to 6Gbps).
  • 2x M.2 SSDs to 2.5in SATA (6Gbps) RAID adapter converter with 2.5in SATA form factor housing, provides TRIM support.
  • Dual M.2 SSD adapter enclosure with RAID 0 and RAID 1 plus Spanning and JBOD.
  • Broad compatibility with support for common SATA M.2 SSDs (2230, 2242, 2260, 2280) (Not compatible with M.2 NVMe or AHCI PCI-Express SSDs).
Check Stock

Adaptec RAID 71605 Storage Controller 2274400-R

  • ▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
  • ▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
  • ▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
  • ▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock

StorageTekPro LSI 9340-8i flashed to IT Mode = 9300-8i w/LSI P16 IT-Mode F/W for ZFS FreeNAS unRAID

  • The eight-port MegaRAID SAS 9240-8i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to entry-level server applications using up to 64 SATA or SAS devices..
  • RAID 0, 1, 5, 10, 50 and JBOD mode - Hardware RAID solution.
  • Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices Up to 16 physical devices in a RAID configuration Patrol read Consistency Check S.M.A.R.T error detection.
  • Solution Provided: Low-cost, green SATA+SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives.
  • Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives.
Check Stock

LSI 9240-8i 6Gbps SAS Raid Card, HBA FW:P20 9211-8i IT Mode for ZFS FreeNAS unRAID 2 SFF SATA RAID Controllers

  • The eight-port MegaRAID SAS 9240-8i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to entry-level server applications using up to 64 SATA or SAS devices..
  • RAID 0, 1, 5, 10, 50 and JBOD mode - Hardware RAID solution.
  • Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices Up to 16 physical devices in a RAID configuration Patrol read Consistency Check S.M.A.R.T error detection.
  • Solution Provided: Low-cost, green SATA+SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives.
  • Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives.
Check Stock

TERRAMASTER D5-300 USB3.1 Gen1 Type C 5-Bay External Hard Drive Enclosure Support RAID 0 RAID 1 RAID 5 RAID 10 Clone JBOD Single Disk Hard Disk RAID Storage Diskless

  • D5-300 is equipped with brand new USB 3.1(Gen1) type-C high-speed interface and compatible with Mac, Windows and Linux computers, and also works with the computers possessing the Thunderbolt 3 interface..
  • Up to 100TB storage capacity. D5-300 can support five (5) SATA hard drives, is compatible with 20TB 3.5 inch SATA hard drive, and has a total storage capacity up to 100TB ( in RAID0). Compatible with various hard drives including 3.5" SATA hard drives, 2.5" SATA hard drives and SSD. (Note: users need to purchase their own hard drives. HDD's are not included.).
  • Relying on the USB 3.1 Gen1 super speed protocol, the D5-300’s transmission speeds can reach up to 220MB/s (Tested with dedicated NAS drives 4TB RAID 0)..
  • Supports multiple RAID modes: RAID 0, RAID 1, RAID 5, RAID 10, CLONE, JBOD, and Single Disk. RAID 5 is recommended as the best option for D5-300, which balances between data security and storage capacity..
  • Various applications. Great for video editing, photo backup, storage of R&D technical documents, archival backup, music libraries, financial records, storage of video surveillance recordings and corporate data storage. Featuring an aluminum-alloy shell and low-noise fans, D5-300 is extremely solid and reliable with good heat dissipation ....
Check Stock

Qphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166

  • [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
  • [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
  • [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
  • [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
  • [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.
Check Stock