Reviews Sanding Grinding Wheel

Glass Bottle Sander Sand & Finish Bottles After Cutting Drill Powered

  • A grinding wheel is specially designed to sand the edges easily ((both inside and outside)).
  • Attach the sander to the drill,place the edge to the surface of the sanding wheel and start sanding.
  • Little skill required, sanding the inside edge difficult to sand by sanding pad.
  • Very durable, grinding wheel can be even used to remove the metal edge or damaged thread.
Check Stock

Dremel 687-01 52-Piece All-Purpose Rotary Tool Accessory Kit- Includes a Carving Bit, Sanding Drums, Grinding Stones, Cutting Discs, and a Storage Case , Gray

  • Ideal for cutting, sanding, polishing, grinding, engraving or carving. The Dremel 52-piece General Purpose Accessory set is the complete start-up kit you need to complete a wide range of projects.
  • Accessory set includes a reusable storage case for easy organization of the included bits.
  • Carving/Engraving accessories: 194 1/8" Carving Bit (x1).
  • Grinding/Sharpening accessories: 952 3/8" Aluminum Oxide Grinding Stone (x1), 85422 25/32" Silicon Carbide Grinding Stone (x1).
  • Cutting accessories: 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel (x1).
  • Cleaning & Polishing: 421 Polishing Compound (x1), 414 1/2" Felt Polishing Wheel (x2), 429 1" Felt Polishing Wheel (x2), 403 3/4" Bristle Brush (x1).
  • Sanding accessories: 409 15/16" Emery Cut-Off Wheel (x36), 407 1/2" Drum Sander (x1), 408 1/2" 60 Grit Sanding Band (x1), 432 1/2" 120 Grit Sanding Band (x2) Includes 401 Mandrel (x1) & 402 Mandrel (x1).
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

200 Pcs 2 Inch Sanding Discs 36/60/80/120 Grit Discs Aluminum Oxide Coated Die Grinder Accessories for Surface Prep Grinding Burrs Polishing Finishes Removing Rust Paint

  • Grinder Accessories Choice: the 2 inch sanding disc set contains 200 pieces of die grinder sanding discs, 4 models including 36, 60, 80 and 120 grits, 50 pieces for each type of sanding disc.
  • Sufficient quantity and multiple models of combination sets can meet your various grinding needs.
  • Easy to Use: the unique safety torque screw design on the change sanding pads can be easily and quickly assembled and tightened with the grinding wheel holder.
  • Knob installation design, convenient to replace the grinding head after consumption, reduce resource waste.
  • Stable and Safe: the aluminum oxide particles on the surface of the grinding wheel are evenly distributed, and the bonding is firm.
  • The back is reinforced with a patch, which has higher hardness, stronger grinding ability, and is not easy to drop sand.
  • The use process is more secure and comfortable.
  • Quality Material Selection: the disc is made of quality aluminum abrasive grains with good wear resistance and hardness.
  • The sanding disc as a whole has good elasticity and plasticity, and is suitable for objects of various shapes.
  • Scope of Applications: the grinder sanding disc set is suitable for grinding, deburring, polishing, rust removal and paint removal operations.
  • Whether it is wood, metal or plastic, ru....
Check Stock

AUTOTOOLHOME 20PCS Abrasive Flap Wheel Sander 80 Grit 1/8\ Shank Diameter 32mm 3/8\ Thick and 1\ Abrasive Sandpaper Flap Sanding Wheel Grinding Head Rotary Tool for Grinding and Polishing

  • Flap wheels sander used for grinding and polishing flat or contoured surfaces,Widely used for the stripping of old layers of paint ,during resurfacing project, sanding, finishing contoured wood surfaces, clean up welds and cuts in iron, stainless steel and metal alloys..
  • Effective as finishing sander after heavy -surface sanding and material removal is complete.
  • High performance aluminum oxide coated provides a solid and durability grinding power combined with high efficiency.Premium abraisves cloth provides long wheel life..
  • 80 grit for medium finish sanding ,Material: Emery Cloth(sandpaper),Metal shaft,20Pack flap wheel sander including 3/8”Thickness(Diameter:1.26"/32mm) and 1”Thickness(diamater:0.79"/20mm),each size 10pcs,1/8" mandrel for most brand rotary tool and electric grinder,Also fit for electric drills, cordless drills..
  • Sanding flap wheel is suitable for smoothing, rust removal, cleaning, deburring, surface grinding, decorative grinding, faceting and so on. Wheel can remove paint and sand, grind, level, and strip surfaces and makes quick work of it.These wheels style disks make use easy..
Check Stock

Dremel 686-01 31 Piece Sanding and Grinding Rotary Tool Accessory Kit- Includes Sanding Drums, Grinding Stones, Abrasive Buff, Cutting Discs, and a Storage Case

  • An assortment of Dremel accessories in 1 convenient kit. Sharpen lawn tools, remove rust, sand a sticking door, engrave glass, plus more.
  • Kit includes a reusable storage case and 31 high quality Dremel accessories for most every sanding, smoothing, shaping and grinding need.
  • Cutting Accessories: 426 1-1/4 inch Fiberglass-Reinforced Cut-Off Wheel (x1).
  • Grinding and Sharpening Accessories: 932 Aluminum Oxide Grinding Stone (x1), 8193 Aluminum Oxide Grinding Stone (x1), 85422 Silicon Carbide Grinding Stone (x1), 84922 Silicon Carbide Grinding Stone (x1).
  • Sanding Accessories: 412 Sanding Disc (x15), 407 1/2 inch Drum Sander (x1), 408 1/2 inch Coarse Sanding Band (x4), 432 1/2 inch Sanding Band(x4), 511 Abrasive Buff (x1).
Check Stock

Sackorange 30 PCS Abrasive Flap Wheel Sander,80 Grit 1/8\ Shank Diameter Cone Shape Abrasive Sandpaper Flap Sanding Wheel Grinding Head Rotary Tool for Grinding and Polishing

  • MULTI-SIZE DESIGN: the abrasive flap wheel sander set contains 14 sizes of flap wheel with 1/4 inch shank,16 pieces 80 grits aluminum oxide sanding wheels and 8 pieces cone shape flap wheel, sufficient quantity to meet your various needs and replacemen..
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders ..
  • WIDE APPLICATIONS: The abrasive flap wheel sander set are applied for rust removal,cleaning, deburring,surface grinding and so on,helping you to complete your work quickly..
  • PACKAGE INCLUDES:valued flap wheel set, The sanding wheel set contains 8 sizes of flap wheel : 3.2 inch, 2.4 inch, 2inch, 1.6 inch, 1.2 inch, 1 inch, 0.8 inch, 0.64 inch.
  • 4 sizes of Cone Shape Abrasive Flap Wheel: 1.2 inch, 1inch, 0.8 inch, 0.64 inch, each contain 2 pieces..
Check Stock

Grinding And Polishing Head Grinding Wheel Dresser With Flat Diamond Coated Surface For Truing Grinding & Deburring Wheels Abrasive Dressing Tools

  • Very suitable for removing metal burrs after cutting, smoothing welds, grinding rivets and removing rust. It is also suitable for sharpening knives, scissors and lawn mower blades..
  • Sanding Head Size: 45*13*13mm/1.77*0.51*0.51”.
  • This diamond wheel dresser is a simple but practical tool of returning your grinding wheel to tip-top condition.
  • it restores and prolongs the life of grinding wheels..
  • Non-slip handle There is non-slip tread on the surface of the handle, which is designed for secure gripping..
  • Applications It is mainly used for all kinds of grinding machine’s grinding, polishing, sharping, perfect for white corundum wheel, brown corundum wheel, chromium corundum wheel and more..
Check Stock

SI FANG 10Pcs 4''x5/8'' Premium High Density Calcined Aluminum Oxide Flap Disc 60 Grit …

  • Premium high density calcined aluminum is characterized by hard-wearing,long life. The type 27 Abrasive grinding wheels are made with a fiberglass backing plate that effectively absorbs vibrations without smear during usage, bringing more stable and efficient grinding..
  • Designed for grinding, blending, sanding and finishing on a wide range of material. Especially suitable for stainless steel also great for mild steel. Flap discs sanding wheel are used to grind rough workpiece surfaces, fast grinding, such as valve castings, angle irons, steel plates, welds, weld scars, rust removal, deburring, etc..
  • Size:100mm x 16mm ,For use on an Angle Grinder.
  • Premium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discs. SI FANG 80 Grit grinder grinding discs have long-lasting use..
  • Ideal for The Home, Workshop, Hobbyists, Tradesmen, Builders and DIY Enthusiasts, etc..
Check Stock

dophee Flap Wheel Sander Set, 1/8\ Round Shank, 80 Grit Abrasive Sanding Wheels, Flap Grinding Wheel Sander for Dremel Drill Rotary Tools, Remove Rust, Weld Burr Polishing Flat(20-Pack)

  • ❤SIZE: Shank diameter: Approx. 1/8"(3.17mm). Head diameter: Approx. 3.2cm/1.26". Head thickness: Approx: 1cm/0.39". Grit: 80#..
  • ❤DURABLE: Strong grinding power, sharp grinding, solid and durability, long life, high tensile strength cloth, high efficiency.
  • High performance aluminum oxide grain for fast material removal premium abrasives cloth provides long wheel life..
  • ❤MULTIPURPOSE: Sanding flap wheels are suitable for deep hole polishing and finishing on the surface of metal and non-metallic complex surface. Particularly applicable for grinding and polishing on surface and its side face..
  • ❤GOOD EFFECT: Sanding flap wheels use for grinding and polishing flat or contoured surfaces, sander wheel can remove paint and sand, grind, level, and strip surfaces and makes quick work of it. Grinding your faded items back to like new condition..
  • ❤EXCELLENT PERFORMANCE: High performance aluminum oxide grain for fast material removal Premium abrasives cloth provides long wheel life. Splendid performance because of the high quality material and special design..
Check Stock

Weiler 30717 3/4\ x 3/4\ x 80AO Wolverine Coated Abrasive Flap Wheel, 1/4\ Stem (Pack of 10)

  • COMMON SHANK SIZE: The 1/8 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders. For best results and longer service life, rotating speed should be maintained below 20,000 RPM..
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • METAL WORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces.
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces. .
  • VARIETY OF WHEEL SIZES: Our 90 Pack Wheel Sander includes 30 pack 1.26" flap wheels, 30 pack 0.79" flap wheels and 30 pack cone shape abrasive sandpaper.
Check Stock

Luckyway 145-Piece Rotary Tool Accessories Kit, Grinding Polishing Drilling Kits, 1/8\ Shank Electric Grinder Universal Fitment for Easy Cutting, Grinding, Sanding, Sharpening, Carving and Polishing

  • DIMENSIONS - This Rotary Tool Accessories Kit includes 16 Sanding Bands,2 Sand Drum Mandrels,6 Felt Polishing Wheels, 1 Cloth Polishing Wheel, 1 Dressing Stone, 6 Aluminum Oxide Grinding Wheels, 6 Silicon Carbide Grinding Wheels, 6 Grinding Wheels with Shank, 36 Cutt-off Wheels, 40 Sanding Discs, 1 Collet Wrench, 3 Collets, 1 Polishing Compound, 5 Fiberglass Reinforced Cut-Off Wheels, 4 Drill Bits,5 Diamond Bits, 1 High Speed Cutter,3 Wheel and Felt Mandrels,1 Brass Brush,1 Nylon Bristle Brush..
  • APPLICATION - 145PCS Rotary Tool Assortment Kit - Perfect includes rich rotary tool accessories for sanding, polishing, cutting, shaping, drilling, deburring, grinding, cleaning, engraving, trimming etc, and enabling you to achieve different crafting work efficiently. They can be used on wood, glass, plastic, metal etc. meet your various application requirements..
  • TOUGH STORAGE CASE - Beautiful and strong plastic case, easy to carry. Each product is firmly embedded in the slot, in good order..
  • Gift FOR DIY ENTHUSIASTS - 145pc Rotary Tool Accessories Kit is great for DIY craft and small family projects. It’s a great gift for those who like hand crafts, and also a perfect present for Christmas, Birthday, Thanksgiving Day, Fathers' Day, etc..
Check Stock

EZARC Flap Discs 80 Grit, 4 1/2 x 7/8-Inch Flap Sanding Disc, Type 29 Zirconia Grinding Wheel for Stainless Steel, Sheet Metal (10 Pack)

  • 【Great Performance】EZARC flap sanding discs are made of hard zirconia material which lasts longer than standard aluminum oxide abrasive material, built for a more robust and economical grinding wheel..
  • 【 Widely Used】80 grit flap disc is smoother than 40 grit, suitable for light stock remove and other grinding work. Our flap disc is widely used for metal or wood, to remove the weld reinforcement, deburring, polishing, and to rust removal..
  • 【 Fast & Efficient Grinding 】Glass fiber and adhesive form a firm combination, will not pollute the working surface. The fiberglass pad can effectively absorb vibration and bring more stable and efficient grinding..
  • 【 Convenient to Use 】Bevel Type 29 angle design makes the edge and corner grinding much more convenient, great for surface sanding, and working on welded seams at a working angle of 5 to 15°..
  • 【 Professional Grinder Flap Disc 】 4-1/2-inch diameter with a 7/8-inch arbor size compatible with an angle grinder with a maximum 13, 300 RPM grinding speed. This angle grinder flap disc is designed for grinding, blending, sanding, and finishing on a wide range of material..
Check Stock

35 Pack 1/4 Abrasive Flap Wheel Sander Set WENORA 80 Grit Aluminum Oxide Flap Wheels Cylindrical Shape Sanding Wheel 7 Sizes

  • 【PREMIUM MATERIAL】 High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • 【SHANK DESIGN UPGRADE 】 we upgraded the ordinary round shank to 1/4-Inch hex shank to improve the firmness at high speeds. Even in large-area heavy-duty machining, there will be no loosening or slipping..
  • 【METALWORKING APPLICATIONS】 The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces.
  • 【WOODWORKING APPLICATIONS】These abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders and.for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces..
  • 【VARIETY OF WHEEL SIZES】Our 35 piece set includes (5) 1” thick sanding wheels with 1/4” hex shank in each of the 7 different sizes.
  • 0.78", 1", 1.2", 1.58", 2", 2.36" and 3.14" widths.
Check Stock