Reviews Sandblasting With Pressure Washers

FAVSTAR Pressure Washer Sandblasting Kit,Wet Sandblaster Attachment,with Replacement Nozzle Tips,5000PSI,1/4 Inch Quick Connect

  • SANDBLASTING PACKAGING KITS: Our pressure washer sandblasting includes 3m hose, 16" pressure washer wand (water input), 15 3/4" sand wand(sand input),....
  • WORKING PRINCIPLE: The pressure sandblasting kit is used to inject sand into the water system for cleaning. Use dry silica sand, baking soda or washed....
  • APPLICATION: The pressure washer sandblaster kit is mainly used to remove rust, graffiti, paint and grease baking, and is ideal for household and....
  • HIGH-QUALITY PERFORMANCE: Sandblasting kits are made of durable materials, brass and stainless steel, which are resistant to corrosion, abrasion, and....
  • EASY to USE: 1/4 inch quick connector on the end of a gun, suitable for most pressure washer..
Check Stock

Tool Daily Pressure Washer Sandblasting Nozzle Tip, Replacement Wet Sandblaster Attachment, 5000 PSI, 2-Pack

  • ATTENTION: Replacement pressure washer sandblasting tips are designed only for Tool Daily 5000 PSI sandblasting kit..
  • The pressure washer sandblast tip includes 2 ceramic nozzles..
  • Working pressure of pressure washer sandblaster tips is up to 5000 PSI. Temperature is up to 140°F/60℃..
  • Sandblasting nozzle for pressure washer is suction-fed injection of sand into water system..
  • Application: pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease. Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock

Angela&Alex Pressure Washer Sandblasting Kit, 5000 PSI Wet Sandblaster Attachment with Goggle, 1/4 Inch Quick Disconnect Sandblasting Kit

  • SANDBLASTING PACKAGING KITS: Our pressure washer sandblasting includes 3m hose, 16″ pressure washer wand (water input), 15 3/4″ sand wand(sand input), a goggle, 4 hose clamps, 4 ceramic nozzles, and 2 rubber bands..
  • WORKING PRINCIPLE: The pressure sandblasting kit is used to inject sand into the water system for cleaning. Use dry silica sand, baking soda or washed river sand for better results..
  • APPLICATION: The pressure washer sandblaster kit is mainly used to remove rust, graffiti, paint and grease baking, and is ideal for household and factory abrasive cleaning!.
  • HIGH-QUALITY PERFORMANCE: Sandblasting kits are made of durable materials, brass and stainless steel, which are resistant to corrosion, abrasion, and stable performance. Its working pressure can reach 5000PSI and the temperature can reach 60 ℃ / 140 ° F..
  • EASY to USE: 1/4 inch quick connector on the end of a gun, suitable for most pressure washer. It is one of the best choices for Father’s Day gifts..
Check Stock

Hurotoms Pressure Washer Sandblasting Kit - Wet Blast Gun Attachment, 5000PSI, 1/4 Quick Disconnect, with Replacement Nozzle, Safety Goggles

  • ▶Sandblasting Kit◀ Hurotoms’ liquid sandblasting machine is more efficient and effective than traditional sandblasting, consumes less abrasive, and does not generate dust, ensuring healthy work and protecting the environment, why not do it!.
  • ▶Compatible◀ The maximum pressure of liquid sand blasting machine reaches 5000PSI, the maximum rated flow rate is 8 GPM3000 PSI @ 4 GPM, 1/4NPT quick coupling is linked to the heavy-duty rubber hose and compatible with most cleaning machines, meanwhile the accessories come with goggles..
  • ▶Multi-Purpose◀ The high-pressure washer kit is suitable for abrasive cleaning, use it to remove rust, scale, paint on various surfaces.
  • it can also clean roads, cars, fences and other places that need to be cleaned, making cleaning more professional and efficient!.
  • ▶Prefect Choice◀ Our liquid sandblasting machine is made of high-quality materials, compatible with brass interface fittings, anti-corrosion and wear-resistant, and is the best choice tool for cleaning needs such as car washing!! Make cleaning more efficient and professional while protecting your eyes!.
  • ▶ Hurotoms’ Sandblasting Kit◀ 1 * 10FT Hose, 1 * High Pressure Washer Wand (Water Inlet), 1 * Sand Wand (Sand Input), 4 * Hose Clamps (Snap), 4 * C....
Check Stock

Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

  • Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sand blaster Attachment, 2500 PSI”..
  • The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps..
  • Replacment Nozzles are available. Product “Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack”. Working pressure of pressure washer sand blaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃..
  • Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock

thebestshop99 10 Gallon Mini Portable Air Sandblaster Sand Blaster Kit High Pressure Tank Red

  • Fast Surface Treatment: Vevor sand blaster is suitable for large-area surface treatment needs with high sandblasting density. The maximum working pressure can reach 125 psi, providing 30% more blasting power than siphon units, improving work efficiency..
  • Sturdy and Durable: Made of high-quality welded steel with special coating treatment, this pot sandblaster is sturdy and durable, has the characteristics of pressure resistance, anti-deformation, rust resistance, providing high safety for operator..
  • Flexible to Move: Equipped with two 6-inch rubber wheels, it is easy to move and is suitable for outdoor rust removal work. An 8.2-foot hose provides easy access to hard-to-reach places, like outdoor iron frames, statues and other immovable objects, etc..
  • Easy to Use: The gas-water separator can keep the sandblasting tank dry and prevent wet sand from clogging the valve.
  • the pressure gauge displays the real-time working pressure, which is convenient for users to observe during operation..
  • Complete Sandblasting Kit: Package contains 4 piece ceramic nozzles, abrasive hose, pressure gauge, plastic hood, clamp, user manual and PTFE tape. One kit, ready to go!.
Check Stock

Twinkle Star Pressure Washer Sandblasting Kit, Wet Abrasive Sandblaster Attachment, Dustless Sand Blasting Kit, 1/4 Inch Quick Disconnect, 5000 PSI

  • Pressure Washer Sandblasting Attachment: Includes a goggle, 10 ft hose, 16 inch pressure washer wand – water input, 17 inch sand wand – sand input, two hose clamps and extra one replacement ceramic nozzle kits..
  • High Quality: Sand blaster kit is made from durable material – brass and stainless steel. Working pressure is up to 5000 PSI. Temperature is up to 140ºF/60ºC. It has anti-corrosion and wear resistance, stable characteristics..
  • Sand Blasting Attachment: Baking soda, dry slica sand, washed and dried river sand can be use as sandblasting kit attachment..
  • Widely Use: Sandblasting kit is suction-fed injection of sand into water system, works for abrasive cleaning. Ideal for abrasive cleaning, such as removing rust, paint, graffiti, baked on grease..
  • Tips: ONLY SUITABLE FOR PRESSURE WASHER HOSE, PRESSURE WASHER, PRESSURE NOZZLE. NOT FIT FOR GARDEN HOSE..
Check Stock

#120 Aluminum Oxide - 8 LBS - Fine Sand Blasting Abrasive Media for Blasting Cabinet or Blasting Guns.

  • IDEAL SURFACE TREATMENT: The pressure sandblasting can perfectly handle the surface of large workpiece, suitable for the high density surface treatment requirements.operating pressure can be achieved 125 psi.
  • STURDY WELDED STEEL TANK: Sturdy welded steel tank, highly efficient and durable. the powder coating can resist rust and corrosion, this sand blaster is unlikely to be deformed and damaged，98 " long hose with check valve，more flexible.
  • GAS-WATER SEPARATOR: Gas-water separator can keep the drying of sandblasting in the barrel and meet higher requirements of sandblasting,Since wet sand tends to clog,our sand blaster can make sure the the compressed air stays dry to prevent clogging.
  • QUICKLY REMOVE: Pressutized design 30% more sandblasting power than siphon units ,this sand blaster is designed for outdoor large jobs, can remove rust from outdoor iron frames, statues and other immovable objects, remove car paint and marble inscriptions, etc.
  • RUBBER WHEEL AND HANDLE DESIGN: Equipped with handle is bending Angle in line with human comfort design and two 6" rubber wheels that allow easy movement of the machine while working.
Check Stock

Sand Blaster VEVOR 10Gal Pot Sandblaster, 125 Psi Pressure Sand Blasting Complete Kit for Paint, Stain, Rust Removal and Special Surface Treatment of Material

  • Fast Surface Treatment: Vevor sand blaster is suitable for large-area surface treatment needs with high sandblasting density. The maximum working pressure can reach 125 psi, providing 30% more blasting power than siphon units, improving work efficiency..
  • Sturdy and Durable: Made of high-quality welded steel with special coating treatment, this pot sandblaster is sturdy and durable, has the characteristics of pressure resistance, anti-deformation, rust resistance, providing high safety for operator..
  • Flexible to Move: Equipped with two 6-inch rubber wheels, it is easy to move and is suitable for outdoor rust removal work. An 8.2-foot hose provides easy access to hard-to-reach places, like outdoor iron frames, statues and other immovable objects, etc..
  • Easy to Use: The gas-water separator can keep the sandblasting tank dry and prevent wet sand from clogging the valve.
  • the pressure gauge displays the real-time working pressure, which is convenient for users to observe during operation..
  • Complete Sandblasting Kit: Package contains 4 piece ceramic nozzles, abrasive hose, pressure gauge, plastic hood, clamp, user manual and PTFE tape. One kit, ready to go!.
Check Stock

Sandblaster Gun Sandblasting Cabinet Foot Valve Sand Blasting Media Kit Sand Blaster Machine Accessories

  • 【Sandblasting Gun】Specially used for polishing, painting and sanding various dead ends of light metals and small metals, rough edges and rusty details, as well as paint peeling, tiles, car surface treatment, glass etching, etc..
  • 【Foot Switches】1/4"NPT Pneumatic Foot Pedal Valve Kit 3 Way 2 Position Threaded Rubber Nonslip Pressure Control with 6mm Pneumatic Fittings..
  • 【Material 】Made of aluminum alloy, the foot pedal eliminates hand fatigue and adds more precise control over the flow of sandblasting media. The kit allows you to blast for longer periods of time without having to take breaks due to hand fatigue..
  • 【Support a variety of sandblasting media】. Suitable for (46-240#) purpose non-metal sandblasting media, baking soda or glass beads, sodium bicarbonate, silica, walnut, garnet, etc. Please make sure to use the correct abrasive for your project..
  • 【Package specifications】Sandblasting gun*1, ceramic nozzle*1, pneumatic foot valve*1. Tips. Please wear gloves and other protective equipment to ensure safe operation, and please do not point the sandblasting gun at people or animals..
Check Stock

Sand Blaster Abrasive Blaster Portable Power Sand Blasting Kit for Removing Paint, Stain, Rust, Compatible Pressure Sand Blaster (Blue)

  • IDEAL SURFACE TREATMENT: The pressure sandblasting can perfectly handle the surface of large workpiece, suitable for the high density surface treatment requirements.operating pressure can be achieved 125 psi.
  • STURDY WELDED STEEL TANK: Sturdy welded steel tank, highly efficient and durable. the powder coating can resist rust and corrosion, this sand blaster is unlikely to be deformed and damaged，98 " long hose with check valve，more flexible.
  • GAS-WATER SEPARATOR: Gas-water separator can keep the drying of sandblasting in the barrel and meet higher requirements of sandblasting,Since wet sand tends to clog,our sand blaster can make sure the the compressed air stays dry to prevent clogging.
  • QUICKLY REMOVE: Pressutized design 30% more sandblasting power than siphon units ,this sand blaster is designed for outdoor large jobs, can remove rust from outdoor iron frames, statues and other immovable objects, remove car paint and marble inscriptions, etc.
  • RUBBER WHEEL AND HANDLE DESIGN: Equipped with handle is bending Angle in line with human comfort design and two 6" rubber wheels that allow easy movement of the machine while working.
Check Stock

Rdutuok Pressure Washer Sandblasting Kit,Sand Blaster for Pressure Washer with Replacement Nozzle Tips,Protect Glasses,1/4 Inch Quick Disconnect 5000 PSI for Abrasive Cleaning

  • Pressure Waher Sandblasting Package Include: 9.8Ft hose, 16" pressure washer wand (water input), 15 3/4" sand wand(sand input), a goggle, 4 hose....
  • HIGH-QUALITY DURABLE- Sandblasting set are Made of durable material, brass and stainless steel,which are resistant to corrosion, abrasion, and stable....
  • WORKING PRINCIPLE: The pressure sandblasting kit is suction-fed injection of sand into water system, use dry silica sand, baking soda or washed and....
  • WIDELY USE:The pressure washer sandblaster kit is great at remove rust, graffiti, paint and grease baking.Plus, they don’t create dust like a....
  • Note: Don't use play sand or other generic sand products. Make sure the sand is bone-dry.Dry the sand in the sun until it flows like granulated sugar....
Check Stock

Hourleey Pressure Washer Sandblasting Nozzle Tip, 5000 PSI Replacement Sandbalster Attachment, 2 Pack

  • Package include: 2 pieces long (1.6 x 0.6inch) ceramic nozzle tips, 2 pieces short (0.8 x 0.6inch) ceramic nozzle tips, 4 pieces pressure washer o-rings..
  • ATTENTION: Hourleey pressure washer sandblasting replacement tips are only for Hourleey 5000 PSI pressure washer sandblasting kit.
  • Application: Hourleey pressure washer sandblaster set works for abrasive cleaning. Great for removing paint, rust, baked, graffiti on grease..
  • Working: The working pressure is up to 5000 PSI, the working temperature is up to 140F..
  • Good Service: If any problem, please feel free to contact us, Prince Mark offer replacement and full refund services..
Check Stock