Reviews Sand Casting Steel Casting

Delft Clay Casting for Gold, Silver, Copper-Based alloys, Pewter

  • ✅ The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc..
  • ✅ Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts..
  • ✅ The Delft Clay Casting Kit includes: 4.4lbs Delft Clay, 2 - 60mm dia. Aluminum Ring Frame, and detailed instructions..
Check Stock

2.2lbs Delft Clay Casting Gold Silver Copper-Based alloys, Pewter

  • ✅ The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc..
  • ✅ Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts..
Check Stock

Simond Store 2 Part Cast Iron Flask Mold and 2 Piece Aluminum Ring Making Mold for Sand Casting, Jewelry Making Casting Tool for Delft Sand Clay Petribond Casting

  • Material: These pair of Sand Casting Flask Mold and Ring mold are highly durable and robust. Traditional Jewellers Metal Casting Flask Mold are made of cast iron and Ring Mold is made of aluminum material..
  • Cost Effective: These casting mold are extremely price effective thanks to low tooling and equipment cost.
  • Neat and Easy Alignment: Correct alignment of flask mold frames is feasible with four locating pins which hold the frames firmly..
  • Applications: It permits you to simply duplicate shapes, metals, coins, rings, jewelry items, and other complex shapes with ease..
  • Ample Scope: Ideal to be used with Petro bond, Delft and Sand Casting Clay and metals like Gold, Silver, Copper, Brass etc.
Check Stock

NOVA3D Wax Resin for LCD 3D Printer 405nm UV-Curing 3D Printer Resin to Jewelry Design Dental & Garage Kits 1000ml

  • 【3d Resin】IFUN 3d casting resin uses special formulas, featuring low thermal expansion coefficient, burns out at high temperature, leaving no....
  • 【Easy to Casting】IFUN 3d resin. No residue, no sand pit, smooth surface, low casting temperature, short casting time. Easy to print a variety of....
  • 【High Precision】This 3d cast resin printing model features smooth surface, showing high precision in details, perfect to cast jewelry..
  • 【Wide Applications】IFUN castable resin has been designed to cast your pieces in bronze, copper, tin or iron, using standard vacuum investment....
  • 【Notice】Please shake well before use. Printed models need to use concentration of 95% alcohol to clean..
Check Stock

RESIONE 3D Printer Resin C01 Dental Castable Resin High Precision for Direct Investment Casting Excellent Fluidity No Post-Curing Required for 3D Printing

  • 【3d Resin】IFUN 3d casting resin uses special formulas, featuring low thermal expansion coefficient, burns out at high temperature, leaving no....
  • 【Easy to Casting】IFUN 3d resin. No residue, no sand pit, smooth surface, low casting temperature, short casting time. Easy to print a variety of....
  • 【High Precision】This 3d cast resin printing model features smooth surface, showing high precision in details, perfect to cast jewelry..
  • 【Wide Applications】IFUN castable resin has been designed to cast your pieces in bronze, copper, tin or iron, using standard vacuum investment....
  • 【Notice】Please shake well before use. Printed models need to use concentration of 95% alcohol to clean..
Check Stock

Sand Casting Set with 5 Lbs Petrobond Quick Cast Sand Casting Clay and Cast Iron Mold Flask Frame Melt Pour Metals

  • Includes: (5) lbs of our Quick Cast Sand Casting Clay, and a 2-Piece Cast Iron Mold Flask Frame.
  • Allows you to cast highly detailed silver, gold, bronze, copper, and more.
  • The mold flask is a sturdy cast iron vessel which is ideal for use with our Quick Cast Sand Casting Clay.
Check Stock

Shimano Coltsniper 120S Stickbait Jig; Bunker

  • Featuring a sand eel-like slim shape design.
  • Shimano's new Coltsniper sinking stickbaits offer exceptional casting distance from the tackle makers unique Propulsion Weight Transfer System to provide exceptional casting distance.
  • By allowing the internal weight to slide back during the cast.
  • and then spring forward when the lure hits the water.
  • anglers will notice casting distance increasing by up 22-percent over similar weight and length lures.
  • Ideal for chasing after calico bass and stripers.
  • the slow-sinking Coltsniper stickbaits have a wide slide swim action when retrieved.
  • They feature chemical finish treble hooks mid-body and at the tail. This unique combination of features make Shimano Coltsniper Sinking Stickbait Lures ideal for chasing powerful and aggressive game fish.
  • Shimano Coltsniper Sinking Stickbait Lures are available in two sizes/weights and 11 awesome colors. The 4.7in model weighs 1.13 oz. and the 5 1/2in weighs 1.91 oz.
Check Stock

ASHERMAN Chest Seal

  • Mainly Used for Iron and Steel Casting, Sand Holes and Pores, and Filling of Casting Defects Such As Cracks. It Can Be Used to Repair Fuel Tanks, Plumbing, Concrete Breaks, and a Whole Lot More.SILLENORTH.
  • Developed as an alternative to torch welding, it provides strong and long-lasting repairs to metals and multiple other surfaces. It will bond almost any clean surface that is free of dirt and oil..
  • After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, sets in 6 minutes, and fully cured in 4-6 hours. Before using the glue, clean and drying the surface and your work should be complete within 20 minutes after mixing..
  • Yout best solution in times of trouble.Repair cracked or damaged metals back to perfection with the Heat Resistance Metal Repair Adhesive! This should help make your DIY metal repairs easy and fast!.
  • The preparation and application are simple and easy. Just mix, apply, and let it dry for a few hours. The full cure time is up to 24 hours..
Check Stock

30A Platinum Silver Gold Plating Machine Jewelry Plater Electroplating Rectifie Jewelry Plating Rectifier Surface Treatments Gold Plating Machine 110V

  • HIGHLY ACCURATE & PRECISE: Equipped with a prices pressure gauge, so you can read the current pressure easily, making relevant adjustments as needed to create a smooth surface. The vacuum chamber/casting cylinder control valve is made of premium metal material for easy and smooth switching.
  • DEEP DRAW VACUUM PUMP: The vacuum hood made of thick aviation plastic is beneficial to reduce the burrs and bubbles produced. The built-in refueling device is installed to adjust the refueling amount by referring to the standard line.
  • HEAVY-DUTY VACUUM INVESTING CASTING MACHINE: This Vacuum Investing Casting Machine is of heavy-duty construction for extremely durability. Features 4 rubber feet, ensuring the stability of the Equipment When Working.
  • JEWELRY CASTING MACHINE SIZE: 22.83"L x 10.8"W x 13.7"H. Ideal for jewelry processing factories and artwork manufacturers to make high-density, pretty jewelry, etc.
  • COME WITH: Vacuum cover, casting machine, rubber base, rubber ring, steel bell pliers, steel bell sleeve, steel bell.
Check Stock

Luna Bean Belly Cast Kit Pregnancy Casting Kit (Smooth) - Mom to Be Gift, Best Gifts Expecting Mom, Pregnancy Gifts for First Time Moms, Pregnant Mom Gifts

  • SMOOTH FINISH: Includes extra items for a smooth and primed finish perfect for painting & decorating! Contains 5 rolls of plaster wrap (4in x 5yd), natural lubricant, smoothing plaster, gesso paint primer, brush, non-latex gloves, sand paper, & drop cloth..
  • CHERISH YOUR BABY BUMP: The perfect pregnancy keepsake to remember your little one's most precious moments..
  • 100% SAFE PREGNANCY BELLY CASTING KIT: Every Luna Bean Casting Kit is made with non-toxic and hypo-allergenic molding material, 100% safe, fun, & easy no-bake drying for children & adults of all ages..
  • PREGNANT BELLY CASTING KIT: Our pregnancy casting belly kit is a plaster cast made of an expecting mom's beautiful pregnant belly. Instead of a flat, 2D image from a photo, create a 3D pregnancy belly cast keepsake..
  • EASY BABY BUMP CAST: Simply mix, molding, cast, and peel away! Comes with easy instructions. Contact us with any questions or concerns and our team will do everything we can to help!.
Check Stock

PHTW Glue Strong Plastic Metal Wood Metal Glass Ceramic Acrylic Adhesive

  • 【Effective Adhesive Agent】developed As an Alternative to Torch Welding,It Provides Strong and Long-lasting Repairs to Metals and Multiple Other Surfaces. It Will Bond Almost Any Clean Surface That is Free of Dirt and Oil..
  • 【Simple to Use】After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded, and drilled after curing. It has a 1:1 mixing ratio, sets in 6 minutes, and fully cured in 4-6 hours..
  • 【High-Temperature Resistant】: Can withstand temperatures up to 150°C. When fully cured, it is as hard as iron and provides uniform bond line thickness..
  • 【Do it Yourself】Big or Small, you can DIY it with this magic welding glue. Our heavy-duty epoxy and adhesives repair & restore it right the first time..
  • 【Wide Use】mainly Used for Iron and Steel Casting, Sand Holes and Pores, and Filling of Casting Defects Such As Cracks. It Can Be Used to Repair Fuel Tanks,Plumbing,Concrete Breaks, and a Whole Lot More..
Check Stock

20 Stella SW 6000XG

  • Tackle the toughest species and conditions with elegance and power using the saragosa saltwater spinning reel.
  • Equipped with a propulsion line management system that provides longer casting distances while preventing backlashes and wind knots from forming.
  • X-ship technology provides improved gear durability and eliminates friction between the spool shaft and gear enhancing the casting performance and....
  • Shielded roller bearings on both sides reducing the possibility of salt or sand from obstructing the bearing's rotation while the waterproof drag uses....
  • Max drag: 44 lbs. / gear ratio: 4.4:1. / weight: 33.3 oz. / line retrieve: 45" / bearings: 6bb + 1rb – powerpro line cap: 65/630.
Check Stock

Tea Light Candle Holder Silicone Mold - by Happy Dotting Company - Angular Shape - Tealight Molds for Cement or Gypsum Casting – Dotting Mandala Art DIY & Creative Projects

  • TEA LIGHT HOLDER silicone art stone mold.
  • SIZES OF CASTING - width at widest point 3.5 inches, height 1.5 inches, candle void space 1.6 inches wide 0.8 inch deep.
  • SMOOTH SHAPE - wonderful to paint on and perfect for all stone art, including dot art, mandala art and fluid art.
  • VARIOUS CASTING POWDERS can be used in these molds eg Dental powder, hydrocal and cement based powders, however these molds have a matte interior therefore resin will not come out shiny.
  • INBUILT HDC (branding) which sits under tea light candle or simply sand this off the casting to remove.
Check Stock