Reviews Sae J1401braided Hose

NQN 2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare

  • ... Cylinder 130,000 BTU/hr. Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, RV Pigtail Propane Hose: 1/4" Male Inverted Flare and QCC1 Fitting. All Fitting Connectors of Propane Hose, both ends of 2-stage regulator made of 100% Solid Brass. RV propane hose made of durable stainless steel braided. Propane Hose and regulator with CSA Certification ensure air tightness 、stability.
  • 【2 Pack 18''Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV propane pigtail hose to 1/4" inverted male flare. (Not the 1/4" Male NPT. Please check your connector before you order it.) This propane tank hose come with tank gauge level indicator with 3 different colors Dial Gauge can glows in dark, allows you to read and monitor the gas level without necessarily removing the tank, and can detect the leak.
  • 【Application Scenarios】This 2-Stage Auto Changeover LP Propane Gas Regulator for RV , suitable for RV with dual propane tanks. For RV/Camper/Travel Trailer. These 18" RV pigtail propane hoses with 2-stage propane regulator can connect d....
Check Stock

2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare, Propane LP Gas Regulator for RV Camper Trailer

  • ...lor to let you know when a tank has been depleted and needs to be refilled also remind you switching to the backup tank. For RVs with dual propane tanks allow removal of empty cylinder for non-stop refill without interrupting propane supply..
  • ❤【2 Pack 18 inch Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV propane pigtail hose to 1/4" inverted male flare. (Not the 1/4" Male NPT. Please check your connector before you order it.) This propane tank hose come with tank gauge level indicator with 3 different colors Dial Gauge can glows in dark, allows you to read and monitor the gas level without necessarily removing the tank, and can detect the leak..
  • ❤【Specification & Material】RV Propane Regulator: Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, Primary Cylinder Capacity 210,000 BTU/hr, Reserve Cylinder 130,000 BTU/hr. RV Pigtail Propane Hose: 1/4" Inverted Male Flare and QCC1 Fitting. All Fitting Connectors of Propane Hose, both ends of 2-stage regulator made of 100% Solid Brass. RV propane hose made of durable stainl....
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

  • Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....
Check Stock

BACOENG Vacuum Pump & Manifold Gauge Set - HVAC A/C Refrigeration Kit - Diagnostic R12 R22 R134a R410A - w/Case

  • Gauge Set — 2 Valve Manifolds with Sight-glass & 1/4″ SAE fittings anodized aluminum block body, oversized sight-glass for easy viewing the refrigerant flow high quality gauge and high accuracy of reading.
  • Vacuum Pump – Newly Designed Compact Vacuum Pump, Portable and Stronger. Flow rate: 3.6CFM Power: 1/4HP Ultimate Vacuum: 0.8Pa.
  • Accessory–3 × 4FT Blue Red Yellow Refrigrant Hose,2 × 1/4″ SAE Male to 5/16″ SAE Female Adapters（R410a）, 1 × Toolkit, 12oz Vacuum Oil, 1 × Manual for Pump and Gauge.
  • Hose– All hose are complied with SAE-J2196 standard standard. Hose Working pressure: 800PSI-4000PSI Acceptable refrigerant: CFC HCFC and HFC.
  • 【Attention】- Ideal for R12 R22 R410A R407C. NEED additional high & low pressure side quick couplers B085XHTS1W if you need to repair R134a vehicle A/C system..
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 10 Clamping Range of 1/2'' to 1-1/16'' (13mm-26mm) for Automotive Plumbing, ,1/2 Inch, 3/4 Inch,1 Inch Hose Clamps

  • Premium Materials: WINL size 10 hose clamps of 13mm-26mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size#10 hose clamps have clamping range from 1/2 inch to 1-1/16 inch (from 13mm to 26mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc.. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 10 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

Mtsooning R134a AC Recharge Hose Kit, Refrigerant Charging Dispensing Can Tap with Gauge 1/4’’ SAE Female Hose for R12 R22 Port for Auto Home Air Conditioner and Refrigerator Refrigerant System

  • ❄Wide Application: Mtsooning AC recharge Hose Kit fits for R134A R12 or R22 refrigerant. Used for auto home air-condition, with highly working performance..
  • ❄Accuate Guage: The Refrigerant Charging Hose Kit has 3 different scale readings for R134, R12 and R22, easy and convinent for your to use..
  • ❄Dimentions: The hose is 19 inch in length which is long enough for your recharing needs. The Dispensing Can Tap has 1/2’’ female x 1/4’’ SAE male adapter..
  • ❄High Quality: The R134A Valve made of corrosion-resistant metal and the hose adopted quality rubber material, features high pressure resistance and sturdy. Inside gasket to prevent leak..
  • ❄Package includes: 1/2’’ female x 1/4’’ SAE male can tap opener, 19’’ recharge hose with 2.7’’ length gauge and one 1/4'' SAE port side for R12/R22 Port ..
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

Aupoko A/C R134A Refrigerator Freon Recharge Kit with 2PC Bullet Piercing Valve, R134A Piercing Can Tap, R410A Straight Swivel Adapter, 2PC 1/4’’ Adapters with Valve Core

  • ❄ WIDE COMPATIBILITY ---- AC charge hose kit with gauge for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning, with highly working performance..
  • ❄ PREMIUM QUALITY ---- R134A can tap, R134A low side quick coupler, tank adapters are made of aluminium alloy, for high heat resistance durability and safety..
  • ❄ EASY INSTALLATION ---- Car ac recharge kit has Push & Lock coupler with auto shut off. Easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge..
  • ❄ DIMENSION ---- 1/2’’ female x 1/4’’ SAE male can tap opener, 59’’ recharge hose with gauge, 13mm R134A low pressure quick coupler, R410A mini split adapter with 5/16’’ SAE female x 1/4’’ SAE male thread, 1/4’’ SAE female and male tank adapter..
  • ❄ PACKAGE INCLUDES ---- With R134A refrigerant charging hose with 7cm Gauge, R134A can opener, R134A quick coupler, R410A straight adapter (1/4" SAE M to 5/16"F), 2pc bullet piercing tap valves kits, 2pc 1/4’’ Female to 1/4’’ Male tank adapters..
Check Stock

SURIEEN R134A A/C Charging Hose with Ball Valve, (4000~800) PSI Working Pressure 1/4' SAE x 1/4' SAE Thread 60' 3 Colors, Fits for HVAC Air Condition R410A R12 R22 R502 R404 Refrigerant Manifold

  • APPLICATION ----- Refrigerant charging hose with compact ball valve deigned to meet 1/4" SAE requirement for refrigerant permutation, fit most refrigerants like R134A, R22, R12, R502, R404. Standard 1/4” female flare fittings with a valve core depressor and 45°bend on one end for convenient access to the system..
  • HIGH WORKING PRESSURE ----- Working Pressure: 800 PSI.
  • Burst Pressure: 4000 PSI. Hose and ball valves with 1/4" SAE thread can be fitted most refrigerants. Note: R410 and R32 refrigerants with 1/4" SAE x 5/16" SAE, if you want to use it on R410 and R32 refrigerants please use a M-1/4" SAE x F-5/16" SAE Adapter..
  • EASY INSTALLATION ----- 3 colors 60” (5ft) hoses coded in red, blue and yellow, and all completed with compact ball valve and plastic handles on each hose. The coupler nuts are deeply knurled for quick finger-tightening..
  • PREMIUM QUALITY ----- Refrigerant 3-color charging hoses made of high-quality brass alloy and rubber, last long.
  • easy to operate and install, strong sealing for durability and safety. Necessary tools for HVAC, car air condition maintenance and coolant or Freon adding..
  • 1 YEAR WARRANTY ----- 3 color refrigerant charging hoses have one-year warranty. true worry-free shopping experience. If this part ever fails please....
Check Stock

Hotwin 9.49mm SAE 5/16' 8mm Nylon Fuel Line Quick Connect Release Hose Disconnect Hose

  • ▶Fuel Line Quick Connect / Disconnect for Fuel / Gas and other common fluid types..
  • ▶Nylon Hose to ID=5/16" (8mm) Rubber Hose..
  • ▶Part number: 9.49mm SAE Fuel Line Connect..
  • ▶Please check the part number and pictures to verify this is the part you need..
  • ▶Package included: 9.49mm SAE 5/16" 8mm Nylon Fuel Line Quick Connect Release Hose.
Check Stock

Mastercool 83272 R1234yf Aluminum Manifold Gauge Set

  • MANIFOLD BLOCK assembled with three 12mm-F fiittings per SAE J2888.
  • 72 INCH RED AND BLUE NYLON BARRIER HOSES with 12mm-M fittings on both sides meets SAE J2888, EPA, SAE and UL standards.
  • 72 INCH YELLOW HOSE with 12mm fitting on one side and 1/2 x 16 LH acme on the other meets SAE J2888.
  • R1234yf HIGH AND LOW SIDE COUPLERS with extended disconnect sleeve meets SAE J639 and J2888.
  • EASY TO READ temperature scales on 3 1/2" gauge face (Bar/PSI/˚F/˚C).
Check Stock

SURIEEN R410A AC Refrigerant Charging Hose Kit, R410A R134A R502 R22 R12 R404A Manifold Gauge Hose AC Charging Testing Kit, with R410A Straight Swivel Adapter, 1/4' Male to 1/2' Female Tank Adapter

  • ♛【SIZE】AC Refrigerant Charging Hose length (excluding Gauge) is 59"/150 cm. Maximum working pressure: 800 PSI, burst pressure: 4000 PSI, Connection: 1/4" SAE Male and Female refrigeration hoses.
  • ♛【PREMIUN QUALITY】Heavy Duty Brass Made Hose Connections. Resistant to corrosion and oxidation, longer life. Refrigerant charging hose Made of high quality rubber, strong sealing for durability and safety. The gauge comes with a protective cover to prevent it from being damaged by external forces or foreign objects.
  • ♛【EASY TO USE】Easy and convenient to use. Gauge has four scale readings of R134a, R410a, R404a and R22 for easily viewing during use. Good for R410a and most other refrigerants like R22, R134a, R404a. One product, more uses.
  • ♛【PACKAGE INCLUDE】2 x 59" connection tube, 1 x pressure gauge, 1 x adapter(1/4" SAE Male to 5/16" SAE Female), 1 x adapter(1/4" SAE Male to 1/2" SAE Female).
  • ♛【SALES SERVICE】We provide 100% perfect customer service, please contact if there is ANY problem..
Check Stock

Gates 23356 Premium Modular Coolant Hose

  • Specifically-engineered materials resist collapse under vacuum.
  • Engineered to resist electrochemical degradation – the leading cause of hose failure.
  • synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover.
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.).
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over.
Check Stock