Reviews Sae Flange Protectors

Maymom Backflow Protector Duckbill Valve Compatible with Spectra S1 Spectra S2 Replace Spectra Backflow Protector Spectra Duckbill Valve Not Original Spectra Pump Parts Spectra S2 Replacement Parts

  • What You Get: 2x backflow protectors (including 2 large caps, 2 small caps, and 2 silicone diaphragms.) and 6x duckbills. Maymom backflow protector....
  • COMPATIBLE with Spectra S1 Spectra S2 Spectra 9 Plus breast pump. The duckbill valves are also compatible with Spectra Dew 350. The parts are also....
  • "SAME SUCTION POWER AS OEM PARTS: Maymom duckbill valves are compatible with Spectra Flange and Maymom Flange. Maymom backflow protectors are....
  • CLOSED SYSTEM. With Maymom backflow protectors, no milk will enter the tubing, so the tubing will remain clean. The breastpump parts can be sanitized....
  • Comply with EU and USA FDA regulations for materials that contact food. Tested by independent labs for quality and....
Check Stock

GPI M-150S Fuel Transfer Pump, Economy Pump Only, 15 GPM Fuel Pump, Direct Mount (110240-02)

  • Chief Gear Pumps (5/8’’ DIA. Keyed Shaft).
  • SAE #12 Inlet and SAE #10 Outlet Ports, CW ROTATION.
Check Stock

Nenesupply 24mm Flange Pump Parts Compatible w Spectra S2 S1 Breast Pumps Replacement Kit for Spectra Pump Parts S2 Parts S2 Accessories Inc Flange Duckbill Valve Backflow Protector

  • NENESUPPLY COMPATIBLE PUMP PARTS 24mm FLANGE FOR SPECTRA S1 S2 9 PLUS BREASTPUMPS. Made by Nenesupply. Inc 2 Medium 24mm Flanges, 2 Duckbill Valves, 2 Backflow Protectors, and 2 Tubing. The flanges need to connect with WIDE MOUTH bottles..
  • COMPATIBLE PARTS MADE BY NENESUPPLY. Interchangeable and Compatible with Spectra flanges, S2 Accessories, backflow protectors, valves, and tubing..
  • COMPATIBLE WITH WIDE-MOUTH BOTTLES. Compatible with Spectra bottles and Nenesupply wide mouth bottles. DOES NOT work with OTHER WIDE NECK BOTTLES. CLOSED SYSTEM. No contact between milk and tubing..
  • DIFFERENT FLANGE SIZE AVAILABLE: 17mm, 19mm, 21mm, 24mm, 27mm, 30mm. Refer to size selection guide in product photo to choose the right size for you..
  • BPA Free. DEHP Free. Dishwasher (top rack) safe. All parts can be sterilized with water steam or boiling water. FDA compliant for food contacts. Tested by independent labs for safety..
Check Stock

Abrams SAE Class-1 Blaster 120 (Amber/White) 36W - 12 LED Snow Plow Truck Vehicle LED Hideaway Surface Mount Strobe Warning Light

  • Certified SAE J845 Class 1 & SAE J578 for Amber, Blue, Red, & White. Meets California Title 13 Class B with Amber, Blue, & Red..
  • Each unit contains 12, 3 watt 7th Generation LEDs with great heat sink management for long life span..
  • Built in flasher with 37+ selectable flash combinations, sync-able between multiple units, TBT (Turn/Brake/Tail) Light Function..
  • Completely Waterproofed, Strong fog penetrability and dust-proof and corrosion resistant..
  • Can be mounted almost anywhere, into a housing reflector, bumper, or onto a surface. – Black flange, Foam back piece, and Installation Manual included..
Check Stock

Abrams SAE Class-1 Bold 12 [Amber/White] 36W - 12 LED Snow Plow Truck Vehicle LED Grille Light Head Surface Mount Strobe Warning Light

  • Certified SAE J845 Class 1 & SAE J578 for Amber, Blue, Red, & White. Meets California Title 13 Class B with Amber, Blue, & Red..
  • Each unit contains 6, 3 watt 7th Generation LEDs with great heat sink management for long life span..
  • Built in flasher with 30+ selectable flash combinations, sync-able between multiple units, TBT (Turn/Brake/Tail) Light Function..
  • Completely Waterproofed, Strong fog penetrability and dust-proof and corrosion resistant..
  • Can be mounted almost anywhere, into a bumper, or onto a surface. - Black flange, Padded Gasket, and Installation Manual included..
Check Stock

Maxim Hydraulic Motor 1.22 CID BIROTATIONAL Circle Flange 5/8\ KEYED Shaft SAE 6 Rear Ports, 271654

  • MOTOR 1.22 CID BIROTATIONAL CIRCLE FLANGE.
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • EASIER INSTALLATION: Quickly install the ball joint with the custom-designed adapter ring..
  • SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
  • SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree & 90 Degree SAE grease fitting included..
  • ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided..
  • SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
  • SIMPLE TO SERVICE: Make servicing a snap with the 90 Degree SAE grease fitting included..
  • ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..
Check Stock

Seachoice 15521 Fuel Sender Reed Switch, 6 Inches Long, Compatible with Most 33 (Full) and 240 (Empty) OHM Fuel Gauges

  • Reliably monitors fuel levels to provide fuel gauge (sold separately) with the most accurate readings.
  • Compatible with 33 (full) and 240 (empty) ohm gauges.
  • No moving mechanical parts, which optimizes durability and reliability.
  • Features a Stainless Steel immersion tube, corrosion-resistant plated mounting flange, gasket (SAE 5 hole), and .250-inch insulated spade connectors.
Check Stock

Caplugs 99394887 Plastic Tapered Cap and Plug with Wide Thick Flange WW-21, PE-LD, Cap OD 1.857\ Plug ID 2.048\

  • Designed to be used as a cap or plug and can be used in many applications.
  • Tapered design provides a range for the parts to fit in components, wide and thick flange for added protection and prevents from being pushed through when used as a plug.
  • Flanged for easy installation and removal.
  • May be used for mil stud, sae-type hydraulic threaded or non threaded fittings.
Check Stock

Hydraulic Gear Pump Sizes from 0 to 18 gpm 3625psi SAE A Flange Side Ports CCW-Rotation, PFEG Series (Shaft: 3/4\ Diameter keyed, 12cc: 9gpm at max. RPM)

  • IMPORTANT: SHAFT MUST ROTATE COUNTER CLOCKWISE WHEN LOOKING AT THE SHAFT. IMPROPER ROTATION DIRECTION COULD LEAD TO SHAFT LEAKAGE AND SEAL FAILURE..
Check Stock

Maymom Pump Parts Compatible with Spectra S2 Spectra S1 Spectra 9 Plus Breastpump, Incl 24mm Flange Valve Tubing Backflow Protector, Replace Original Spectra Pump Parts or Spectra S2 Accessories

  • "Maymom aftermarket PUMP PARTS FOR SPECTRA S2 SPECTRA S1 SPECTRA 9 PLUS BREASTPUMPS. Made by Maymom. Not Original Spectra Parts. Incl 2 Flanges (24mm), 2 Valves, 2 Backflow Protectors and 2 Tubings. The flanges can only connect to WIDE MOUTH bottles..
  • "AFTERMARKET PARTS MADE BY Maymom. INTERCHANGEABLE WITH SPECTRA PARTS. All parts are interchangeable with Spectra Pump Parts. Can be used with Spectra flange, Spectra backflow protector, Spectra valve, and Spectra tubing..
  • "USED WITH WIDE-MOUTH BOTTLES ONLY. Use this kit with Spectra bottles, Avent bottles, and Maymom wide mouth bottles. DOES NOT work with OTHER WIDE NECK BOTTLES. CLOSED SYSTEM. No contact between milk and tubing..
  • "DIFFERENT FLANGE SIZE AVAILABLE: 19mm, 21mm, 24mm, 25mm, 27mm, 28mm, 30mm, 32mm. Refer to size selection guide in product photo to choose the right size for you..
  • "IN RETAIL PACK. All parts can be sterilized with water steam or boiling water. Do not contain any BPA. Tested by independent labs for safety..
Check Stock

[Patent Design] CKE 40 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves Wood Post Protector for 1/8" Wire Rope Cable Railing, DIY Balustrade, Come with a Free Drill Bit

  • ...e = 1.1", Sleeve Diameter=0.28"，Flange Diameter =0.58"(The longest diameter of an ellipse)/0.51"(The shortest diameter of an ellipse), Drill Bit Diameter = 7mm..
  • Design: Exclusive Patent Design Product.Often used in conjunction with straight wood post protectors, this 30 degree wood post protectors transition wood post protectors from straight runs transitioning to an angled run. Widely used this on intermediate angled posts on stairways and ramps, it can replace the combination of Straight Protector Sleeves + 30 Degree Angle Beveled Washer, create a cable railing system that exposes your beautiful view while only exposing a nearly flush fitting head..
  • Package: 40 PCS 30 Degree Stainless Steel Protector Sleeves + 1 * Drill Bit..
Check Stock