Hot Surface Oven Igniter, Capilary 12in L
- Price For: Each Item: Hot Surface Oven Igniter Type: Igniter Gas Type: Nat and LP Dial Range: 3.2 to 3.6A Replaces: 7432P025-60, 7432PO52-60/K 08067970 142-224, 336650, 4163781, 4392019, 316T023P03/P07/P10/P12/S01, F16-743, 7432P062-60/K, 08067970, 316t023P03/P07/P10/P12/801 Mounting Position: All Mounting Positions, Electrical Lead 7-1/2″ L Capillary Length: 12″ Includes: (2) Porcelain Wire Nuts.
- Country of Origin (subject to change): United States.
Check StockTestor Corp 3527C Non-Toxic Cement w/Applicator 1oz
- Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure....
- Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and....
- Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
- Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
- INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry....
Check StockRefrigerator Cold Control, 34 to 55 Range
- Price For: Each Capillary Type: Capillary w/Bulb Sensor Switch Type: Close On Rise Height (In.): 2-1/2 Type: Medium Temp. Width (In.): 1-1/8 Full Load Amps: 16 Depth (In.): 1-1/8 Locked Rotor Amps: 80 Switch Action: SPST Application: Designed for Temperature Cold Control Cold Off: 35 Item: Refrigeration Control Includes: Faceplate and Mounting Hardware.
- Control Range (F): 34 to 55 Capillary Length (In.): 47-1/4 Warm On: 54.5 Voltage: 120/240 Normally On (F): 41 Country of Origin (subject to change): China.
Check Stock
Raven RCO410 3 in 1 Compressor Hard Start Capacitor Kit for Refrigerators & Freezers 1/4-1/3 H.P. 115VAC
- ✅ CONTENTS: 1 Compressor hard start capacitor and 2 wire nuts.
- ✅ COMPATIBILITY: Use it for compressor sizes 1/4 to 1/3. Part RCO-410 fits several different compressor types including RSIR, CSIR, PSC, and CSR compressors. Use it to repair residential and commercial fridges and freezers. Replaces parts number RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410.
- ✅ PERFORMANCE: It’s a combination overload, capacitator and relay device. It replaces all three electrical components of a capillary fridge or freezer system at once to avoid damaging the compressor.
- ✅ HIGH-QUALITY DESIGN: This exact equivalent part is durably made and intelligently designed to work with nearly all refrigerator system makes and models. Plus, it’s pre-wired for easy installation.
- ✅ 100% MONEYBACK GUARANTEE: We offer 90 days return and 365 days replace (at no charge) after the date of original purchase for risk-free purchase.
Check Stockuxcell 304 Stainless Steel Capillary Tube Tubing 7mm ID 8mm OD 300mm Length 0.5mm Wall
- Capillary Tube is a long, narrow tube of constant diameter. The word “capillary” is a misnomer since surface tension is not important in refrigeration application of capillary tubes..
- Exceedingly demanded in precise apparatus or instruments,automatic instruments,eletronic parts,oil or gas plants and other industries..
- Stainless Steel Tube is a good choice for most applications due to greater corrosion resistance and precision..
- Alloy 304 stainless steel is one of the most common stainless steel and it is having nickel and chromium alloy metal as non-iron constituents..
- Please check the correct size before purchasing..
Check Stockuxcell 304 Stainless Steel Capillary Tube Tubing 5.65mm ID 6.35mm OD 300mm Length 0.35mm Wall
- Capillary Tube is a long, narrow tube of constant diameter. The word “capillary” is a misnomer since surface tension is not important in refrigeration application of capillary tubes..
- Exceedingly demanded in precise apparatus or instruments,automatic instruments,eletronic parts,oil or gas plants and other industries..
- Stainless Steel Tube is a good choice for most applications due to greater corrosion resistance and precision..
- Alloy 304 stainless steel is one of the most common stainless steel and it is having nickel and chromium alloy metal as non-iron constituents..
- Please check the correct size before purchasing..
Check Stock
Satellite city CRK-H-SS super solvent 2oz debonder for CA GLUE
- Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure TM) and 2 ounce bottle of Accelerator (Insta-Set TM)..
- Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds..
- Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
- Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
- INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly..
Check Stock
RCO410 3-in-1 Hard Start Capacitor Kit for Freezer & Refrigerator Compressors by PartsBroz - Replaces Part Numbers TJ90RCO410, AP4503017, 600-410, ERP410, HS410, RC0410, RCO-410, RCO410
- ✅ PART NUMBER RCO410: It’s a high-quality exact replacement part for part numbers RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410..
- ✅ FOR COMPRESSOR SIZES 1/4 to 1/3: Part RCO410 fits several different compressor types including RSIR, CSIR, PSC, and CSR compressors. Use it to repair residential and commercial fridges and freezers..
- ✅ EXTENDS LIFE OF YOUR COMPRESSOR: A hard start kit helps your fridge or freezer compressor last longer. It also allows the compressor to work more efficiently, which will help to lower your power bill..
- ✅ DIY-FRIENDLY, 3-in-1 DEVICE: It’s a combination overload, capacitator, and relay device. It replaces all three electrical components of a capillary fridge or freezer system at once to avoid damaging the compressor..
- ✅ HIGH-QUALITY DESIGN: This exact equivalent part is durably made and intelligently designed to work with nearly all refrigerator system makes and models. Plus, it’s pre-wired for easy installation..
Check StockPhoton Lizze LED Hair Laser Treatment Enhancer & Accelerator Bivolt (automatic 110-220/240V), with Mini Hair Straightener, Argan Oil, and other Free Gifts Bundle Worth over $30.
- Allows you to have 100% straight hair without damaging your hair. Reduces keratin treatment application time..
- Enhances hair capillary fibre and provides long colour durability. Provides brightness and long fixation..
- Relaxes hair while restructuring its fiber for new chemical process. Does not alter the internal structure of the hair..
- Opens the hair fibers and fixes the product within the hair for new chemical applications. It seals keratin treatment product into cuticle within shorter time..
- ⚠️ WARNING: In accordance with Amazon USA, if your order delivery address is outside USA, please note that you are 100% responsible for any potential custom duty payable or custom’s related issues if applicable. It is your responsibility to ensure you understand your local custom’s regulations before you buy..
Check StockMortairvent 202 6mm (200 sq. ft.)
- 95% open design creates a continuous capillary break and channel for moisture to drain, accelerating drying of the exterior cladding..
- Simple and quick to install. Easier and more cost effective than traditional furring strip methods..
Check Stock
WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger
- Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
- Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
- Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
- Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
- brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
- U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check StockSunpro CP7983 Mechanical Oil/Water Temperature Gauge - Black Dial
- Blue-line styling with black 2-in face and white digits.
- Includes 72-in capillary tubing with 5/8-in national pipe thread and 1/4-in, 3/8-in, and 1/2-in adaptors.
- Includes 72 capillary tubing with 5/8 NPT thread and 1/4", 3/8 and 1/2" adapters.
Check StockNEW IN BOX TURNTABLE NEEDLE FOR SHURE N95ED N95 M95 M-95ED 767-DED 4767-DE
- This KN95 face mask is manufactured by a certificated manufacturer Chengde technology Ltd,. Co. The filter efficiency of this mask is tested by NPPTL....
- 5 Protective Layer - Our breathable face masks are made of high quality non-woven fabric. 2 skin-friendly non-woven outer Layers makes them....
- Protective Core - The inner layers are made of melt blown cloth for the filtering function. These ultra-fine fibers with unique capillary structure....
- Perfect mask for shopping, public transport, bus terminals, shopping malls, parks and busy city streets..
- This KN95 mask is NOT an N95 mask. For more information about KN95 masks please see the following before you purchase: amazon.com/AboutKN95s.
Check Stock
