Reviews Rv Cable Tv Hookup Plate

Winegard RA-7296 75 ohm Wall Plate Amplifier

  • Use with Winegard non-amplified Sensar TV antennas (RV-5095 and RV-5090 only).
  • Features +12 VDC receptacle, cable input jack and second set jack.
  • Fit specific, check part numbers for compatibility.
  • Winegard RA-7296 Wall Plate Signal Amplifier for non-amplified antennas.
Check Stock

USX MOUNT Lockable RV TV Mount for Most 10-26 Inch LED, Flat Screen TVs RV Mount on Motor Home Camper Truck Marine Boat Trailer Full Motion TV Wall Mount up to 33 lbs VESA 100x100mm Easy One Step Lock

  • ... The wooden board in the vehicle should be thicker than 1/2 inch. +/-5 degrees post-installation adjustment allows.
  • ADJUST FOR OPTIMAL VIEWING: This Articaulating RV TV mount Tilts +5°/-15°，swivels+/-90°（Tips ：Swivel angle depends on your TV size）.
  • PRODUCT INCLUDES: Come with bubble level, 3 pieces pack of cable ties and all standard mounting hardware (►TV Screws: M4*12mm 4pcs, M4*30mm 4pcs, M5*12mm 4pcs, M5*30mm 4pcs, M6*12mm, M6*35mm. ►Spacers: M6*17mm 4pcs, 2.5mm 4pcs. ►Washers: M4 4pcs, M6 4pcs.), 10-year friendly US-based customer service..
Check Stock

FLNS220QS WEBKIT 1#Removable Tv Flush Mount, Quick Disconnect, Detachable face, 200x200mm, RV -1

  • DUAL LOCATION CAMPER AND RV TV MOUNT: Our RV TV mount comes with two wall plates and a quick release system to use both inside and outside your RV. Rust-free RV exterior mount made from Aluminum with sleek powder coating for added protection from the elements..
  • EASY INSTALLATION: Installs in 3 easy steps: 1. Install the wall plates with two screws, inside and outside your RV. 2. Attach the VESA plate to the back of your TV/monitor. 3. Slide the VESA plate onto the wall plates. Wall plates come with a bubble level for alignment. VESA plate can expand up to 200x200 mm patterns with the included adapters to fit larger TVs..
  • SWIVEL AND TILT function allows perfect viewing angle of your TV. Tilt up or down up to 30 degrees and swivel left or right up to 60 degrees. Our travel trailer mount offers viewing angle adjustment and low-profile design, without having to deal with a long arm that need to be locked in place when the RV is in motion..
  • HEAVY-DUTY DESIGN: Your TV is in safe hands. Our camper TV mount is strong enough to hold up to 33lbs of weight..
  • US-BASED CUSTOMER SERVICE team is available to assist with questions. Comes with mounting hardware and installation instructions. We offer 5-year warranty on all our TV mounts..
Check Stock

Sanus Advanced Tilt 4D Premium TV Wall Mount Bracket For Most 42 - 90 Flat Screen TVs - Universal Low Profile Tilting TV Mount Fits 16 ,18 ,24 Studs-Max Weight 150 lbs & Max VESA 600 x 400mm - VLT7

  • ...rands including samsung, LG, Vizio, Sony, Toshiba & more..
  • This TV Mount extends 6.8" from the wall for easy cable hook-up and provides the most tilt for even the largest TVs.
  • perfect for mounting a TV above a fireplace.
  • Advanced technology smoothly tilts and swivels TV mount in all four directions for easy cable hookup and provides the best viewing angle.
  • All inclusive SANUS Advanced Tilt TV Mount kit, features a comprehensive hardware bag, drilling template, easy to follow install manual, and pre-assembled parts all to keep installation time under 30 minutes. Also, the open wall plate design allows for mounting directly over electrical outlets or media boxes. Last, thanks to the ProSet feature, the mount can be easily adjusted post installation..
  • Experience the Sanus difference. Comes with a 10 year warranty, and top-notch customer service. Our Minnesota -based experts are ready to chat 7 days a week if you have questions or run into a snag..
Check Stock

MQCE220-WEBKIT2

  • ...ng TV mount fits different types of TV like Lcd/Led/Oled/Qled/Mini Led, alternative or direct current TVs and DVD combo TVs. Television mount fits RV, camper, trailer, mobile home, truck and boat with wooden board ≥ 1/2 inch thick..
  • ✔[LOCKABLE RV TV MOUNT] Locking mechanism of RV mount secures swivel arms and TV plate at one time when vehicle in motion to prevent any bumps. Easily lock and release your TV/Monitor with the pulling strap, stop creaking on your trip..
  • ✔[FULL MOTION RV WALL MOUNT] Adjustable articulating RV TV mount for camper can be rotation by 180°, and extended to 15.59” and retracts to 3.86”. RV TV bracket can be adjusted upward and downward, with tilting angle from +3° to -15°. Swivel RV mount can be swung left or right by 90°..
  • ✔[EASY INSTALLATION ] With clear instruction and all included hardware in pre-labeled bags, camper tv mount can be installed in less than 15 minutes. Wall mount and removable tv mount for rv with double wall plates can be detached from one location and mounted on another, indoor or outdoor..
  • ✔[CUSTOMER SUPPORT] We are glad to answer your pre-purchase and installation questions. Please check you TV VESA size, TV weight before order. This tv mount was made in highly steel makes whole unit sturdy ....
Check Stock

Magnadyne RVTV-W2 Omni-Directional Amplified TV/AM/FM Antenna and Distribution Plate White

  • TV-1W is a wing style omni directional antenna that mounts on the roof of your RV/motor home. This model replaces the previous RVTV-W2 that had a dome....
  • AM/FM antenna cable assembled with a Female Motorola automotive type plug. TV antenna cable assembled with Female F-connector. 4G LTE signal filter....
  • The antenna system also comes with a 12V powered , WS-B1 Black wall plate with 2 TV-outputs and shore cable input. A manual switch selects roof....
  • TECHNICAL SPECIFICATIONS: Frequency range of VHF: 47-230MHz, UHF: 470-710MHz. Receiving range: FM/VHF/UHF. Maximum output level: 110dBµV. Gain: 30dB.....
  • Wing style antenna also available in Black (ASIN: B00SW1D1RS).
Check Stock

MOUNT-IT! RV TV Mount With Dual Wall Plates | No-Rust Quick Release Aluminum Mounting Bracket For Indoor Or Outdoor Use | Low-Profile Full Motion Arm, 33lbs Capacity | Up To VESA 200x200mm

  • DUAL LOCATION CAMPER AND RV TV MOUNT: Our RV TV mount comes with two wall plates and a quick release system to use both inside and outside your RV. Rust-free RV exterior mount made from Aluminum with sleek powder coating for added protection from the elements..
  • EASY INSTALLATION: Installs in 3 easy steps: 1. Install the wall plates with two screws, inside and outside your RV. 2. Attach the VESA plate to the back of your TV/monitor. 3. Slide the VESA plate onto the wall plates. Wall plates come with a bubble level for alignment. VESA plate can expand up to 200x200 mm patterns with the included adapters to fit larger TVs..
  • SWIVEL AND TILT function allows perfect viewing angle of your TV. Tilt up or down up to 30 degrees and swivel left or right up to 60 degrees. Our travel trailer mount offers viewing angle adjustment and low-profile design, without having to deal with a long arm that need to be locked in place when the RV is in motion..
  • HEAVY-DUTY DESIGN: Your TV is in safe hands. Our camper TV mount is strong enough to hold up to 33lbs of weight..
  • US-BASED CUSTOMER SERVICE team is available to assist with questions. Comes with mounting hardware and installation instructions. We offer 5-year warranty on all our TV mounts..
Check Stock

Magnadyne TV-X Omni-Directional Amplified TV/AM/FM Antenna and Distribution Plate (Black)

  • TV-1B is a wing style omni directional antenna that mounts on the roof of your RV/motor home. This model replaces the previous RVTV-B2-WEB that had a dome style design. This antenna has both TV (UHF/VHF) & AM/FM capabilities so you are able to listen to your radio or watch TV while you are on the road or parked at a campground. Please look at the installation instructions on the listing photos to reference installation..
  • AM/FM antenna cable assembled with a Female Motorola automotive type plug. TV antenna cable assembled with Female F-connector. 4G LTE signal filter featured. See installation instructions in the listing photos to see the diagram of wiring from the antenna into the vehicle..
  • The antenna system also comes with a 12V powered , WS-B1 Black wall plate with 2 TV-outputs and shore cable input. A manual switch selects roof antenna input or shore cable input..
  • TECHNICAL SPECIFICATIONS: Frequency range of VHF: 47-230MHz, UHF: 470-710MHz. Receiving range: FM/VHF/UHF. Maximum output level: 110dBµV. Gain: 30dB. Impedance: 75Ω. Power supply: DC 12V.
  • Wing style antenna also available in White (ASIN: B00USE3JF6).
Check Stock

SoftstartRV SSRV3T by NetworkRV Enables Easy start A,RV Air Conditioner Unit-Run On A Small Generator Limited Power RV AC Hard Starter Kit for Air Conditioner HVAC Bundle with Installation Kit (Pack of 1)

  • ...vating and we're here to help. The SoftStartRV reduces and eliminates most of the compressor noise and vibrations, resulting in a better overall RV experience, and better sleep..
  • For 150V 50-60Hz Motors and Upto 3 Ton Compressors.No Contactor or Capacitor Needed.Both are Built In.
  • Run two air conditioners on a 30 amp hookup -Run one air conditioner using only a small portable generator -Run one air conditioner on a 20 amp household hookup -Run one or two air conditioners using your onboard inverter system.
  • Enables An RV Air Conditioner To Start And Run On A Small Generator, Or Limited Power.
  • NetworkRV expressly warrants its new product made by it to be free from manufacturing defects for a period of one year from the date of delivery to the original purchaser of our product. We stand by you and our products when the heat doesn't! Plus you can get an additional year of Warranty, free, for a total offor of 2-years..
  • Complete Guides And Tutorials - Here at NetworkRV, our customers are our biggest priority. Whether you're a propane grill master and know nothing about Softstarters or maybe an RV enthusiast and know everything there is to know, we have a full catalog of articles, web installation guides, live rooftop support via phone and much more for any leve....
Check Stock

Wi4You Cable Wall Plate 2 Pack Decotive Recessed Wall Plate with Easy Mount Wings Side Opening for Low Voltage Wall Plate WI1010-2

  • Recessed cable wall plate is for wires and in wall cable management kit - low voltage wall plate, effective Cable Hider for TV, hide wires in wall behind the flat TV or other electric media.
  • Single Gang cable pass through wall plate Side opening cable management wall plate - Recessed outlet wall plates for cables management, 1 gang wall plate for wall cable pass through.
  • Smart mount wings multimedia cable wall plate - easy mount cable cover, no additional bracket needed, perfect for wall wire pass through, great solution for data cord outlet.
  • ABS cable wall plate pass through - the 1-Gang wall plate is made of non-broken ABS material, solid low voltage cable pass through wall plate.
  • Pack & Warranty - 2pcs 1 Gang ce tech low voltage recessed cable plate for TV.
  • Serach "Wi4You" for more single gang wall plate solution.
Check Stock

Recessed Cable Wall Plate 4 Pack with Fly Mounting Wings Bottom Opening for Wall Plate Cable Pass Through for Speaker Wires, Coaxial Cables, HDMI Cables, or Network/Phone Cables WI1009-4

  • Wi4you recessed tv outlet box Build-in Easy mount wings - easy mount recessed wall plate, no additional bracket needed, perfect for wall wire pass through, great solution for data cord outlet.
  • Bottom opening cable management wall plate - recessed coax wall plate for cables management, 1 gang recessed low voltage plate, bottom or Side opening for wall cable pass through.
  • Recessed cable plate for cables and wires concealing - low voltage cable plate, effective recessed wall outlet for TV, hide wires in wall behind the flat TV or other electric media.
  • ABS multimedia wall plate - the recessed wire box plate is made of non-broken ABS material, solid recessed cable plate.
  • Pack & Warranty - 4 pcs recessed cable wall plate for TV.
  • Search "Wi4You" for more wall plate solution.
Check Stock

Right Angle Coax Quick TV Connector, 5-Pack F Type Male to Female Push On Plug Adapter Convertor RFAdapter, for Wall Plate, Antenna, Coaxial Cable, RV Satellite Receiver

  • This coax cable connector works with all antenna, satellite receiver and cable TV. Fit for RVers, satellite dish, cable TV, internet, RV trailer, coaxial cable and so on..
  • High quality, made with nickel-plated brass for exceptional quality and extremely low signal attenuation. Commonly used on RG58, RG59, RG6, and RG11 coaxial (75Ohm) cable..
  • Push on connector is quicker and easier than threaded connector, just pull and push, don't need screwing. It lets the coax be flat on the wall and relieve TV cable connector stress by making a 90 degree turn without making unsightly bends in the coax. Commonly used on wall plate which is behind cabinets, furnitures or some tight space..
  • Come with 5-Pack, which can save you much and makes you always have a backup..
  • We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don’t hesitate to contact us, we will serve you our best..
Check Stock

Winegard PL-7000 Dish Playmaker Portable Satellite Antenna with Roof Mount Kit

  • DISH Playmaker portable satellite antenna featuring a larger high-strength military grade aluminum alloy reflector for improved signal strength, optional RV roof mount and updated sleek design..
  • Works exclusively with DISH HD solo satellite receiver technology. Compatible with DISH Pay-As-You-Go, pay only for the months you need, or add to home DISH satellite service.
  • powered by single coax connection through dish receiver.
  • easy to use and lightweight RV portable satellite dish..
  • Satellite dish automatically finds dish HD satellite orbital locations making it easy to watch your favorite TV shows in the RV..
  • Compatible with Carryout G3, DISH Playmaker (PL-7000), and DISH Playmaker Dual (PL-8000).
  • Converts a portable satellite antenna into a permanent roof mount antenna.
  • Includes four mounting feet, a cable entry plate, hardware packages for installation, and printed instructions.
Check Stock