Reviews Ruger Scope Rings

Monstrum Dual Ring Scope Mount Compatible with Ruger 10/22 | 1 Inch Diameter

  • Dedicated dual ring scope mount compatible with the Ruger 10/22 platform.
  • Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required. The mount will not install on platforms other than the Ruger 10/22..
  • 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Ruger Fiber Optic Fire Sight Set for 10/22 Rifle Red and Green - 90340

  • Dedicated scope mounting platform built specifically for the Ruger 10/22.
  • Scope rings mount directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required.
  • The rings are available in 1 inch and in 30 mm diameter versions. Confirm the diamaeter of your scope tube before purchasing..
  • 1 inch in height with a see through base, allowing for simultaneous use of iron sights.
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Ruger 10/22 Rifle Scope Rings with See-Through Base | 1 Inch Diameter

  • Dedicated scope mounting platform built specifically for the Ruger 10/22.
  • Scope rings mount directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required.
  • The rings are available in 1 inch and in 30 mm diameter versions. Confirm the diamaeter of your scope tube before purchasing..
  • 1 inch in height with a see through base, allowing for simultaneous use of iron sights.
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Monstrum 3-9x40 Rifle Scope with AO Adjustable Objective | Ruger 10/22 Edition with Ruger 10/22 Dual Ring Scope Mount

  • End-to-end rifle scope solution built exclusively for the Ruger 10/22 platform.
  • Adjustable 3-9 times magnification, for targeting out to 500 yards and beyond.
  • An adjustable objective lens or AO - that allows for sharper focus of the target image, elimination of parallax, and range estimation.
  • Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Precision scope mount machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount....
Check Stock

Spanner Nut Wrench Tool with Non-Slip Handle

  • PRECISION torque driver wrench kit specifically developed for scope mounting, gunsmithing, maintenance and more. Compatible with any standard 1/4 ‘’ bits..
  • ACCURATE 10-70 inch-lb range with distinct 1 inch/pound increments allow for repeatable exact settings and strict adherence to desired torque specifications..
  • INCLUDES premium storage case and set of 12 1/4’’ inch bits commonly used by leading brands of scope rings & bases for optics mounting..
  • EASY to read scale window and visual, audible click feedback prevents damage from overtightening screws and eliminates guesswork..
  • RUBBERIZED grip and optional Force-Assist driver handle make it effortless to tighten screws and fasteners accurately..
  • COMPATIBLE with most rings and bases such as Weaver, Leupold, Warne, Vortex, Zeiss, Sig Sauer, Tract, Nikon, Talley, Seekins Precision, Night Force, Burris, MDT, Steiner, XLR, Ruger, Badger Ordnance, Sight Mark and more..
  • PREMIUM KIT: includes protective, high-density, easy-storage case.
Check Stock

Real Avid Gunsmithing Torque Wrench Kit | All in One Torq Driver Tool with Screwdriver Bit Set & Accurate 1 Inch/Pound Setting for Precision Scope Mounting. Premium KIT.

  • PRECISION torque driver wrench kit specifically developed for scope mounting, gunsmithing, maintenance and more. Compatible with any standard 1/4 ‘’ bits..
  • ACCURATE 10-70 inch-lb range with distinct 1 inch/pound increments allow for repeatable exact settings and strict adherence to desired torque specifications..
  • INCLUDES premium storage case and set of 12 1/4’’ inch bits commonly used by leading brands of scope rings & bases for optics mounting..
  • EASY to read scale window and visual, audible click feedback prevents damage from overtightening screws and eliminates guesswork..
  • RUBBERIZED grip and optional Force-Assist driver handle make it effortless to tighten screws and fasteners accurately..
  • COMPATIBLE with most rings and bases such as Weaver, Leupold, Warne, Vortex, Zeiss, Sig Sauer, Tract, Nikon, Talley, Seekins Precision, Night Force, Burris, MDT, Steiner, XLR, Ruger, Badger Ordnance, Sight Mark and more..
  • PREMIUM KIT: includes protective, high-density, easy-storage case.
Check Stock

ApexHorizon Scope Rings Optic Mounts - Titanium Alloy Scope Rings 30mm for Picatinny Rail, Tactical Heavy Recoil Rifle Scope Rings Precision Mounts Rings (Scope Rings 30mm Mount)

  • Titanium Alloy Scope Rings: Made of titanium alloy and precision-machined aircraft-grade 6061 aluminum alloy. Titanium alloy mounting part is high solidity, shockproof, anti-shake, anti-corrosion, and wear resistance. A reliable material to make sure your scope is precisely and firmly mounted on Picatinny rail..
  • 30mm & Medium Profile: Set of 2 scope rings are both 1.18 inch/30mm diameter. 40in/Ibs ring torque, 2 screws for rail clamping, and 4 screws on top to ensure your rifle scope reaches alignment. Mount on rail easily, stay aligned, and without any wobble. Removed or installed quickly by using Allen key..
  • Rings for Picatinny Rail: The optic rings fit for standard Picatinny rail. The recoil control key holds the scope rings perfectly still and will not shift or move under fierce recoil. By utilizing titanium alloy on the clamping base, the scope rings achieve a way longer service life than similar scope rings and work perfectly under extreme environments..
  • Professional Choice: The scope mount rings are heavy duty style yet lightweight so that it withstands heavy recoil and does not add up extra weight. Each ring is about 81g. Perfect for outdoor hunting, tactical and precision target practice..
  • 2-Piece Scope Rings Design: Different rifle scope has a ....
Check Stock

EZshoot Reflex Sight with 4 Reticles Red Dot Sight, Reflex Holographic Optic Scope with 20mm Rail Mount ，Absolute Co-Witness

  • ✌【Perfect 1" Scope Rings For 11mm Dovetail Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 Pcs Medium Profile + 2 Pcs High Profile in one package. These scope rings fit for 3/8'' or 11mm dovetail rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.55'' gap from base of mount to bottom of ring, Item Height 1.77'', Dimension 1.61*1.77*0.83 Inch, Weight 1.55 Oz per ring.
  • 2 Pcs High Profile: 0.82'' gap from base of mount to bottom of ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz per ring..
  • ✌【Built-In Tape Protection & With Stop-Pin Design】 Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. One of the high rings and one of the medium rings have a stop pin the bottom, Which prevents the ring from sliding once set..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..
Check Stock

Atom Optics 30mm Dovetail Scope Rings for 3/8\ or 11mm Dovetail Rails High Profile Scope Mounts 2PCS

  • 30mm scope rings 11mm Dovetail Rails 2pcs high profile，with allen wrench.
  • 3/8 Dovetail scope rings made of solid aluminum alloy with anodized black matte finish,precision machined.
  • Dovetail scope rings for 3/8" or 11 mm,the ring is for most scopes which are in 30mm scope tube.
  • 11mm Dovetail scope ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with 11mm Dovetail Dimension.
  • High profile scope rings (item height:2"),the height from the center of the scope tube to the picatinny base is 1.33 inches(34mm).
Check Stock

Ruger® Cottonwood 40 inch 10/22® Gun Case, Rifle Case by Allen®, Black and Red

  • 42 inch Case Designed to Fit Ruger 10/22 Models With or Without a Scope.
  • Dense Foam Padding with Durable Endura Exterior.
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
  • Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
  • 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
  • ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe p....
Check Stock

kemimoto 2Pcs R-ifle Scope Rings 1 Inch Pica-tinny Aluminum Tactical Sporting Optic Rings Rail Optics Mounting Kit Black Solid Steel Shooting Hunting

  • 【SIZE AND SHAPE DESIGN】:2 Pieces 1 inch Solid scope rings which made with solid steel material,.
  • 【SEMI-SEPARATION DESIGN】：Unlike 6 screws which need to screw with allen wrench which takes a lot of time. Our scope rings with semi-seperation design so that you just need to screw two srews with allen wrench to lock the rings.It will save your time and lock up your scope solidly.
  • 【STAR NUT DESIGN】：The install of tactical scope rings was extremely easy and design with the star nut so you can use hand to screw the rings onto your Pica tinny rail easily.
  • 【COMPLETE ACCESSORIES】:The scope rings comes with extra 4 screws.
  • allen wrench and installation instruction in the package to make installation a breeze.
Check Stock