Reviews Rubber lined U bolt

ZQULOYO 4 PCS Universal Stainless Steel Roof Box U-Bolt Clamps Rooftop Cargo Carrier Rack Bolts Car Van mounting Accessories U-Bracket Clips with 8 Lock Nuts 2 Strap Kit for Most Cars

  • 【FITMENT】This roof box u bolt clamps is suitable for most cars on the market, can be used for up 85mm(3.34 inch) width and 40mm(1.57 inch) thick luggage rack..
  • 【HIGH-QUALITY MATERIAL】u-bolt clamps using galvanized steel material, durable, good alkali resistance, acid resistance, corrosion resistance, strong temperature resistance..
  • 【FEATURE】This product has a rubber gasket and a plastic back plate，which can protect your car from scratches to the greatest extent, and can increase friction to improve overall stability..
  • 【EASY TO INSTALL】: No need to drill and install directly. Accurate mounting size and long-enough bandages, suit your roof box and daily opening and closing box..
  • 【PACKAGE INCLUDED】 Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2 bandages，1 Hole Sealing Sticker..
Check Stock

HYS VHF Marine Antenna Low-Profile 156-163Mhz Antennas W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable with PL259

  • Marine Antenna VHF 156-163MHz, 2 dBi signal with up to 50W of power.
  • W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259.
  • VHF Rubber Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting..
  • Stainless Steel L-bracket&U-bolts, it comes with U-bolts which can be used with the attached plate for pole mounting..
  • The antenna does not come with mast pole mount.
  • it comes with TWO U-bolt which can be used with the attached plate for pole mounting..
  • Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use..
  • HYS VHF Marine Antenna made of high quality rubber with cable and clip, it will help you get longer communication range..
Check Stock

Hefty Haul Trailer Hitch Tightener for 1.25" and 2" Hitch Anti Rattle, Heavy Duty Steel, Anti Rattle Hitch Tightener 2 Inch, Trailer Hitch Accessories, Hitch Clamp, Tow Hitch Stabilizer, 1 Pack

  • Compatibility: anti rattle hitch tightener works with Classes III, and IV Hitch Receivers (1.25" and 2"), hitch stabilizer 2 inch. This hitch clamp will keep your trailer hitch from shaking and rattling when you drive down the road..
  • Durable and Heavy-Duty: The rubber coated U-Bolt and .31" thick black powder coated plate with anti-rattling stabilizer enables this to withstand all weather conditions and loads..
  • Perfect Fit: Adjustable fit and high quality materials ensure a quiet and stable towing/hauling experience. Perfect for hitch receivers, hitch racks, hitch anti rattle, anti rattle hitch pin and more..
  • Convenient and Easy Installation: Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place with the included hardware. Trailer hitch accessories..
  • What's Included: Trailer hitch stabilizer with rubber coated U-bolt, tightener plate, 2 lock washers, 2 flat washers, and two nuts with complete instruction..
Check Stock

HiTow Trailer Hitch Tightener Anti-Rattle Stabilizer for 2' & 1.25' Hitch, Rubber-Coated No Rattle Noise, Corrosion Resistant

  • Compatible with all 1-1/4 inch and 2 inch Hitch, Rubber Coated.
  • Stops rocking, wobbling, banging, clanking and jerking caused by sloppy，take all the slop out, no rattle or fish tail, will providing a smooth and quiet towing experience.
  • Includes a heavy-duty U-bolt and thick powder coated plate that will stand up to all weather conditions and loads.
  • Easy installation by sliding the U-bolt over the stinger, sliding the tightener plate into the bolt, and tightening it in place with the included hardware, can be mounted from the bottom if hitch ground clearance is low.
  • Perfect for a variety hitch of SUV’s, vans, trucks, RV’s, sedans and trailers.
Check Stock

TORCH 8.5\ Square Extended U Bolts Extra Long 2.5\ wide 9/16\ Ubolt w Hardware

  • FITS: Many applications. Please message us with your make/model and current U bolt size if you have any questions about fitment..
  • CONTENTS: 4x Square U-Bolts (measurements are from inside the bend 8.5" long and 2.5" wide).
  • INSTALLATION: Bolt on kit. U bolts are 8.5" from the inside bend and just over 9" in overall length..
  • Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
  • NOTES: Please measure your existing U bolts before purchasing to ensure these U bolts are correct for your application. Please message us if you have any questions..
Check Stock

REXBETI Staple Gun, Manual Brad Nailer Power Adjustment Heavy Duty 3 in 1 Staple Gun with 2600-Piece Staples for Upholstery, Fixing Material, Decoration, Carpentry, Furniture

  • Before use, make sure the strength adjustment bolt was already be tightened. If it came loose, be sure to tighten the bolt, or the loose bolt may pop out..
  • Comes with 1000pcs D-type, 800pcs U-type and 800pcs T-type staples to meet your different needs.
  • Rubber grip and convenience handle lock for comfort and safe.
  • When the staple gun is stuck, just pull down the metal drive channel and remove the stuck nails to ensure the nail gun works again.
  • Thick carbon steel construction for durability, multi-purpose allows easily insertion of D-type, U-type, T-type staples.Easy operation.
Check Stock

MaxxHaul 70115 46 x 36 x 4-1/2 Roof Rack Rooftop Cargo Carrier Steel Basket Car Top Luggage Holder for SUV and Pick Up Trucks - 150 lb Capacity

  • Instant cargo space for vehicle with cross bars.
  • Easy to assemble and install (assembly and mounting hardware are included).
  • Attaches to most cross bars with easy to use u-bolts for simple installation.
  • Includes rubber caps to cover the U-bolts and protect the cargo.
Check Stock

RAM Mounts Handlebar U-Bolt Base for Rails 0.5\ to 1.25\ in Diameter RAM-B-231ZU with B Size 1\ Ball

  • Zinc-coated metal U-bolt base with 1" rubber ball is designed to sit at right angles to mounting rail.
  • includes black cover caps for exposed ends of the U-bolt.
  • Compatible with any B size RAM Mounts component.
  • ball and socket technology allows for near-infinite adjustability.
  • Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments.
Check Stock

REXBETI Staple Gun Manual Brad Nailer Power Heavy Duty 3 in 1 Staple Gun with 2600-Piece Staples for Upholstery Fixing Material Decoration Carpentry Furniture Staple Gun+Case+Remover

  • Before use, make sure the strength adjustment bolt was already be tightened. If it came loose, be sure to tighten the bolt, or the loose bolt may pop out..
  • Comes with 1000pcs D-type, 800pcs U-type and 800pcs T-type staples to meet your different needs.
  • Rubber grip and convenience handle lock for comfort and safe.
  • When the staple gun is stuck, just pull down the metal drive channel and remove the stuck nails to ensure the nail gun works again.
  • Thick carbon steel construction for durability, multi-purpose allows easily insertion of D-type, U-type, T-type staples.Easy operation.
Check Stock

Danco 97023 Universal Tank to Bowl Toilet Repair Kit with"U" Shaped Gasket

  • Kit includes 2 tank bolts with washers and nuts, 1 sponge rubber spud gasket and 1 “U” shaped gasket.
  • Universal design for use with any toilet brand.
Check Stock

Vehiclex Anti Rattle Hitch Tightener for 1.25\ and 2\ Hitch Receivers – 0.44\ U-Bolt Diameter – Protective Anti-Rust Coating

  • A TIGHT AND SILENT HITCHING. Stabilizes hitch mount, preventing its rattling and wobbling..
  • PROTECTIVE COATING. Rubber-coated U-bolt and powder-coated tightener plate reduce the risk of scratches, chipping, and corrosion in any weather..
  • FITS THE MOST COMMON HITCH SIZES. Tightens any brand hitches I, II, III, and IV classes for 1 1/4" and 2" receivers..
  • EASY INSTALLATION on bike racks and hitches for cars, crossovers, trailers, vans, SUVs, and trucks..
  • THE SET COMES WITH 0.44" U-bolt, 0.31" tightener plate, 2 lock and 2 flat washers and 2 nuts..
Check Stock

Square U Bolt in Zinc 3/8 x 3 x 7 U Bolt Zn Industrial and Scientific Supplies U Bolts for Boat Trailer Tube Rectangular Wood and Metal Objects 4 Pieces

  • Common Size: the square U bolts measures about 3/8 inch in diameter, 3 inch in width and 7 inch in length, proper for 3 x 3 inch square, suitable size can meet your different fastening needs, please check the size before ordering.
  • Sufficient Quantity: you will receive 4 pack of square U bolts in zinc, including 4 pieces of u bolts, 4 pieces of frame plates and 8 pieces of nuts.
  • Enough quantity satisfy your uses and replacements.
  • Hard Material: the square U bolt adopts carbon steel material, and with zinc plated, sturdy and reliable, with nice rust and corrosion resistance, each bolt can withstand the weight, still perform well in rainy and wet environments.
  • Wide Applications: the U bolts are widely suitable for various fields, such as industry, manufacturing, maintenance, the automotive sector, clothing production, etc., ideal for fastening tubes, woods, trailer, and so on.
  • Tips: It is recommended to use lubricant during installing the U bolts to prevent wear and tear.
  • Use a manual wrench or socket ratchet when installing nuts.
  • Do not use high speed power tools or impact tools to tighten the nuts.
Check Stock

CZC AUTO Hitch Tightener Heavy Duty Anti-Rattle Stabilizer for1.25 2 Inch Hitch, Rubber Coated Lock Down Hitch Stabilizer Set with a Wrench for Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount

  • Firm and Solid with a Long Lifespan. CZC AUTO rubber coated trailer hitch tightener equiped with φ0.4 inch U-bolt that coated with orange rubber for a better silence feature.
  • Zinc plated flat wahsers, spring washers, nuts and 0.28 inch thick black powder coated plate are anti corrosion. The heavy duty rustfree anti rattle stabilizer can undertake all weather condition and serve for a long time..
  • Vital Specifications. The tow clamp is perfect for locking 1-1/4 inch and 2 inch hitches Only ( If you need bigger one, please find: B07Z36ZXBT). This hitch clamp is compatible with most hitch brands reese towpower, maxxhaul, connor and hitches classes I, II, III, and IV (1, 2, 3 and 4). It's suitable for trailer truck SUV sedan RV camper van and minivan..
  • Superior Performance in Universal Application. Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc, this lock down hitch stabilizer helps to decrease noise and give you a quiet world when towing..
  • Easy to Install. After inserting the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, there is a risk for U-Bolt to....
Check Stock