Reviews Rubber Mounting Feet

Metabo HPT Miter Saw Stand | Universal, Portable, Quick-release Mounting Brackets | Accepts up to a 12-inch Sliding Miter Saw | Supports up to 400 lbs | UU240F

  • MATERIAL SUPPORT: Extend 8 ft for supporting longer material.
  • HEAVY DUTY: Steel construction which can support up to 400 lbs.
  • LIGHTWEIGHT: Stand weighs only 50 lbs. for stability and easy transport.
  • MITER SAW SIZE: Accepts up to a 12 In. sliding compound miter saw.
  • EASY SETUP: Tool-less height adjustment of material supports for quick and easy set-up.
  • EASY MOUNTING: Quick-release mounting brackets allow for easy mounting and removal of miter saw on the stand.
  • RUBBER FEET: Non-marring rubber feet on mounting brackets prevent surface damage when saw is removed from stand and placed on finished surfaces.
  • MATERIAL STOPS: Installed material stops are adjustable for repetitive cutting applications.
  • WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty.
Check Stock

Kenning 12 Pcs 4 Inch Hairpin Furniture Legs Heavy Duty Gold Metal Hairpin Table Legs with Rubber Floor Protectors and Screws for Cabinet Coffee Table Sofa TV Stand

  • ...ou to create industrial modern furniture designs and make it distinctive.
  • Thickened Load Bearing: these heavy duty hairpin legs are made of heavy duty solid iron with electroplating process and gold color power coated finish, is glossy and smooth, anti oxidation and not easy to rust.
  • Furniture legs 4 inches high and mounting bracket is 0.12 inch thick, 4 dresser feets can support more than 1700lb.
  • DIY Furniture Project for Minimalist Styles: these hairpin legs 4 inch with a classic V shape for mid century modern style, nice decorations for bedside table, cabinet, coffee table, wardrobe, drawer, nightstand, stool or table or bench, multifunctional furniture hairpin legs.
  • Non Slip and Silent Floor Protectors: each package has additional rubber feet that make an ideal fit, use pre rubber feet to keep your floors away from breakage or as an added stabilizer for that wobbly chair or table, and keep silent when dragging.
  • These modern furniture legs will bring a lot of convenience to your life.
  • Mounting Bracket Pre Drilled for Easy Installation: each mounting bracket of cabinet feet is pre drilled with 4 holes that 4 screws are matched accordingly, easy to install the gold dresser legs within minutes.
Check Stock

120 Pieces Soft Cutting Board Rubber Feet with 304 Stainless Steel Screws 0.31 x 0.59 HD Soft Not Slip Non Marking Anti-Skid Fine Grips for Furniture Electronics and Appliances

  • ★ Function: Help prevent that sofa moving too easy and interrupt you rest on it, or chair sliding too fast and scratching floor, enough quantities....
  • ★ Every set includes 120 small round rubber bumpers and 130 304 Stainless steel screws(D15*12*H8mm)..
  • ★ Rrubber bumpers complement cutting boards, cabinet doors and glass table tops..
  • ★ Each round rubber feet is equipped with a self-tapping screw for mounting, compared to the self-adhesive round rubber feet, our products enable....
  • ★ Each round rubber feet is equipped with a embedded stainless steel ring, compared with other round rubber feet, our products last longer and work....
Check Stock

Antrader 12Pcs Rubber Round Table Chair Furniture Feet Leg Pads Conical Recessed Rubber Feet Bumpers Pads Dia.1.25" x 1" x Height 1.2"

  • Cone shape, rubber material, recessed design. Inner metal pad, make it more stable..
  • The tapered rubber feet have a through-hole and a recess for mounting with screws (screws are included here)..
  • 30mm/ 1.2" height x 27mm/ 1" top diameter x 32mm/ 1.25" bottom diameter..
  • 6.5mm/0.26" non-threaded screw hole and 12.5mm/0.49" screw head hole..
  • These rubber feet can avoid your furniture feet from scratching and damaging your floor, also can keep your furniture from moving or sliding around. The rubber feet is used for furniture, display shelf, machinery equipment, experimental equipment, etc..
Check Stock

BOSS Audio Systems CH12DVC 1800 Watt, 12 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

  • Sensitivity SPL (1W / 1m) 86 dB, Resonant Frequency 36 Hz.
  • Polypropylene Cone, 2 Inch Copper Voice Coil, Rubber Surround.
  • Sealed Enclosure Internal Volume: 1.2 Cubic Feet, Ported Enclosure Internal Volume: 1.7 Cubic Feet.
  • 5.5 Inch Round Inch Port Circumference, 38 Inch Port Length, 30 Hz Port Frequency.
  • 5.3 Inch Mounting Height, 11 Inch Mounting Hole Diameter.
Check Stock

BOSS Audio Systems CH10DVC 1500 Watt, 10 Inch, Dual 4 Ohm Voice Coil Car Subwoofer

  • Sensitivity SPL (1W / 1m) 84 dB, Resonant Frequency 38 Hz.
  • Polypropylene Cone, 2 Inch Voice Coil, Rubber Surround.
  • Sealed Enclosure Internal Volume: .8 Cubic Feet, Ported Enclosure Internal Volume: 1.4 Cubic Feet.
  • 3 Inch Round Inch Port Circumference, 13 Inch Port Length, 32 Hz Port Frequency.
  • 4.6 Inch Mounting Height, 9.3 Inch Mounting Hole Diameter.
  • Dimensions: Depth 11” x Width 11” x Height 4.8”.
Check Stock

Liberty Garden Products 703-1 Multi-Purpose Steel Garden Wall/Floor Mount Hose Reel, Tan

  • Holds up to 200-feet of 5/8-inch garden hose (hose not included).
  • Industrial grade, heavy duty, solid wall mounted reel that anchors to lawn or turf, rubber boots are ideal for a non-skid floor mount.
  • Made of tough 13 gauge steel with industrial strength powder coated finish that is weather resistant.
  • 5-feet of leader hose. 1/2 inch Mounting Holes.
Check Stock

BOSS Audio Systems CXX12 Car Subwoofer - 1000 Watts Maximum Power, 12 Inch , Single 4 Ohm Voice Coil, Sold Individually,Black

  • Sensitivity SPL (1W / 1m) 85 dB, Resonant Frequency 32 Hz.
  • Polypropylene Cone, 2.5 Inch Voice Coil, Rubber Surround.
  • Sealed Enclosure Internal Volume: 1.2 Cubic Feet, Ported Enclosure Internal Volume: 1.8 Cubic Feet.
  • 4 Inch Round Inch Port Circumference, 12 Inch Port Length, 34 Hz Port Frequency.
  • 4.8 Inch Mounting Height, 11 Inch Mounting Hole Diameter.
Check Stock

BOSS Audio Systems CXX10 Car Subwoofer - 800 Watts Maximum Power 10 Inch Subwoofer Single 4 Ohm Voice Coil Sold Individually

  • Sensitivity SPL (1W / 1m) 87 dB, Resonant Frequency 36 Hz.
  • Polypropylene Cone, High Temperature Voice Coil, Rubber Surround.
  • Sealed Enclosure Internal Volume: .65 Cubic Feet, Ported Enclosure Internal Volume: 1 Cubic Feet.
  • 3.5 Inch Round Inch Port Circumference, 10 Inch Port Length, 38 Hz Port Frequency.
  • 4.6 Inch Mounting Height, 9.2 Inch Mounting Hole Diameter.
Check Stock

Koolehaoda Mini Tripod,Universal 3 Legs Monopod Base Stand Unipod Support with 3/8 Screw for Monopods Ballhead - A1

  • ★ Made of high strength Aluminum alloy body and anti-slip rubber feet and Plastic , durable and solid..
  • ★ Standard 3/8" threaded mounting makes it suitable for any monopod and ball head with a 3/8" screw thread hole..
  • ★ Anti-skid bottom rubber feet pads design has better gripping force for more stable shooting..
  • ★ When loose the vertical locking screw, can achieve 20° tilt and 360° rotation for free panning and tilting adjustment while video or micro....
  • ★ Three feet can be reversely folded for maximum portability and storage..
Check Stock

Koolehaoda Mini Tripod,Universal 3 Legs Monopod Base Stand Unipod Support with 3/8″ Screw for Monopods Ballhead – A2

  • ★ Made of high strength Aluminum alloy body and anti-slip rubber feet and Plastic , durable and solid..
  • ★ Standard 3/8″ threaded mounting makes it suitable for any monopod and ball head with a 3/8″ screw thread hole..
  • ★ When loose the vertical locking screw, can achieve 20° tilt and 360° rotation for free panning and tilting adjustment while video or micro filming shooting. When locking the screw, the unipod comes back to vertical status. The bottom can be adjusted by a hex wrench..
  • ★ Anti-skid bottom rubber feet pads design has better gripping force for more stable shooting..
  • ★ Three feet can be reversely folded for maximum portability and storage..
Check Stock

Hose Reel Wall Mount Commercial Grade 200ft Capacity

  • Heavy 13 gauge steel tubing and mounting frame for strength.
  • Non-skid rubber feet provided for use as a portable floor unit.
Check Stock

BAZOOKA BTA10250D BT Series Class D Amplified Tube Subwoofer (10")

  • 240W car subwoofer with 8 gauge amp wiring kit for everything you need to achieve a premium sound in your car.
  • Fits into any space and features a butyl rubber surround, built-in amplifier, and vented enclosure design to increase bass output.
  • Comes with mounting straps and wired bass control.
  • Aviation grade carpet is durable and neutral color for use with all interiors.
  • Includes 17-foot 8-gauge red power cable, competition high-quality fuse holder, 3 feet of 8-gauge black ground cable, 16 feet of 18-gauge blue turn-on wire, a 20-foot high-performance RCA interconnect.
  • Also includes 20 feet of speaker wire, 20, 4-inch wire ties, 3, rubber grommets, a Number 10 gold-plated ring terminal, a 5/16-inch gold-plated ring terminal, and a 1/4-inch gold-plated ring terminal.
Check Stock