TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer 300 Degree High Temperature Nozzle,Silent Mainboards TMC2209 Drive,600W Power Supply,Support PVA TPU ABS PLA Nylon,11.8 x11.8 x13.8
- INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints.
- THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing.
- NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work.
- EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes.
- BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing.
- prints can be extracted from the bed by hand following cool down.
Check StockTENLOG TL-D3 Pro Independent Dual Extruder 3D Printer 300 Degree High Temperature Nozzle,Silent Mainboards TMC2208 Drive,600W Power Supply,Support PVA TPU ABS PLA,Direct Feed,11.8 x11.8 x13.8
- INDEPENDENT DUAL EXTRUDERS: 3D printer is ideal for efficient and sturdy prints.
- THREE MODES: Dual material, duplicate mode, and mirror mode to allow you to use extruders in tandem or independently for more efficient printing.
- NEAR-SILENT PRINTING: A mute motherboard and direct drive extruders are designed to print near-silently for non-distracting design work.
- EASY TO ASSEMBLE: 3D printer can be assembled in less than 5 minutes.
- BOROSILICATE GLASS BED: Distributes heat evenly for less warping and smooth printing.
- prints can be extracted from the bed by hand following cool down.
Check Stock3M 5180 PTFE/UHMW Tape, 0.75\ width x 36yd length (1 roll)
- Chemical resistant surface for sealing and masking..
- Easy release surface provided by wrapping rollers, plates, belts, etc. where buildup of sticky materials and inks can occur..
- Wrapping rubber laminating rollers on hot polyethylene extruders to create a release surface to help minimize clean-up..
- Demonstrate good conformability when wrapping rollers..
- 3M Preferred Converter: TapeCase is a 3M Preferred Converter.
- 3M has partnered with TapeCase to make their products available in a larger assortment of sizes, so that customers can use the tape in a variety of applications..
Check Stock3M - 1/2-5-5180 5180 PTFE/UHMW Tape, 0.5\ width x 5yd length (1 roll)
- Chemical resistant surface for sealing and masking..
- Easy release surface provided by wrapping rollers, plates, belts, etc. where buildup of sticky materials and inks can occur..
- Wrapping rubber laminating rollers on hot polyethylene extruders to create a release surface to help minimize clean-up..
- Demonstrate good conformability when wrapping rollers..
- 3M Preferred Converter: TapeCase is a 3M Preferred Converter.
- 3M has partnered with TapeCase to make their products available in a larger assortment of sizes, so that customers can use the tape in a variety of applications..
Check StockMonoprice - 112504 Premium 3D Printer Filament 1.75MM 0.1kg/spool - Cleaning Filament - Compatible With Almost All 3D Printers And 3D Pens
- Keep the nozzles and extruders on your 3D printer printing like new using this 1.75mm Cleaning Filament from Monoprice!.
- It is a good idea to periodically clean the nozzles and extruders on your 3D printer to ensure that they feed filament smoothly and evenly..
- It is also good to clean when switching filament colors or material types..
- This cleaning filament is designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament.
- To clean using this filament, simply print about 12" of material. It prints at a wide 160 ~ 260C temperature range.
Check StockFLASHFORGE Adventurer 4 3D Printer with 2 Removable Nozzle Extruders and Flexible Heating Plates Free-Leveling Plate Remote Camera Monitoring Resume Accurate Mute and on Cloud Printing AD4
- Auto Leveling Flexible CNC Platform: The platform is composed of CNC installation base leveling and 8.0mm ultra flat composite alloy plate. Adventure....
- Removable Nozzle: Packed with standard 0.4 240℃ and 0.6 265℃ high temperature extruders, compatible with 0.3/0.4/0.6mm, 240/265℃ extruders.....
- Easier to Use: FREE-level platform, unbox to print, no need to level or adjust platform. auto-detects filament usage status, avoids filament waste,....
- Upgraded Air Filtration System: Equipped with HEPA 13 filter, it can effectively remove 99% of the smell of TVOC powder and activated carbon filter.....
- Built-in HD Webcam: You could track the printing progress in real time. Adventure 4 printing can be resumed after power failure or other accidents.....
Check Stock
The Right to Bear 3D Printers
- 【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC..
- 【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch..
- 【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint..
- 【Latest slicer software version 6.5.1】: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algo....
Check Stock6 Pieces 3D Printer 1.75 Filament Filters Filament Cleaner Filter Cleaner Blocks Flame Resistant Rubber Foam Wiped Off Debris for PLA ABS PETG or Other Printing Filaments Gray
- Package includes: come with 6 pieces 3D printer 1.75 filament filters in gray color, this cleaner blocks flame is a useful 3D printer part and....
- Stable material and reasonable design: the filament cleaner blocks are made from crack resistant rubber foam material, which can slip over standard....
- Dimension: product size is 15.5 x 30 mm, packing size is 148 x 102 x 38 mm.
- How to operate: the anti-static filament cleaner wipes lint, dust or dirt before the filament enter your printer's extruder and nozzle.
- Widely application: the 3d printer filament cleaner can be widely applied with Direct-Drive and Bowden Extruders, wipe the dust, hair, small plastic....
Check StockRelevant Play Mad Mattr Master Builder Mini Extruder Box Set
- Mad mattr holds its shape, easy to mold, never dries out.
- Includes 6 mini extruders, safe cutting tool, 2 Bounce pouches of Mad mattr in pink and blue.
- Extruder shapes include Octagon, triangle, Star, circle, square, house.
Check StockShimpo Handheld Extruder
- Handheld Extruder includes 5 Dies and 1 Blank die made of stainless steel..
- The barrel unscrews and you fill it with clay, then use the extruder like a calking gun..
- Hollow die set available Product number: H-EXTRD-HDS.
- The 4 IN 1 Extruder die set comes with 9 dies and 1 block out die. H-EXTRD-4IN1.
- Hand held extruders are great for forming anything from coils to small slabs and can be used in a variety of construction techniques.
Check StockGizmo Dorks 1.75mm PVA Filament 0.5kg for 3D Printers, Natural
- Excellent filament for 3D support material that dissolves in water.
- PVA must be kept and stored dry when not in use.
- Can be used in 3D printers with dual extruders to create prints with intricate supports that can be later dissolved.
- Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer.
Check StockRobox 3D Printer Dual Extruder High Definition
- Headlock System: Allows quick change of print head.
- Quick Fill Dual Nozzle Technology: Detailed perimeter nozzle (0.3mm).
- Smart Reel System: Automatic material recognition.
- wide range of materials and colors available.
- Smart Extruder System: Supports single or dual extruders.
- Fully automatic material loading/unloading.
- Automaker Software: East to use interface.
Check StockFMA Omcan Food Machinery TR95 Commercial Pasta Extruder 13 lb Capacity 33 lb hr
- Supplied with 3 cutter dies (N. 8, N. 21, and N. 26) 1 spaghetti die, 1 penne die, and one combination fettucini and flat die.
- Comes with full instruction manual featuring many recipes as well as 3 pasta dies. Additional dies available for $199 each..
- These pasta extruders are ideal for restaurant and supermarket applications. The TR50 and TR70 are economical table top models while the TR75C to....
Check Stock
