Reviews Router Table Lift

Rockler Pro Router Lift 8-1/4 x 11-3/4 Plate – Kit Includes Aluminum Router Plate Insert Ring Set of Hex Keys on Key Chain - Easy to Install Router Lift Systems - Woodworking Router Table

  • Woodworking Router Lift: Two patent-pending features raise the Rockler router table insert plate with lift into a class of its own: ultra-fast....
  • Easy Bit Changes: Raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments. Our router table....
  • No Tools To Search For: Push the button to release the insert ring, then wind the Quick-Gear to raise the bit above the router lift table in just....
  • Use The Adjustment Gear: Once the bit is installed, quickly lower it, and click in the insert ring, and use the fine adjustment gear of our lift pro....
  • What’s Included? This Router Lift Kit includes (1) Rockler Pro Lift Router Lift, (1) Aluminum router plate (3/8'' thick), (1) Insert ring (1-1/2''....
Check Stock

O'SKOOL Router Lift Systems for 3-1/2" Diameter Motors, 9-1/4'' x 11-3/4'' Plate 5-Piece Insert Ring Kit

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use Cam wheels to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 0.05,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise cent....
Check Stock

Rockler Pro Lift Router Lift - 9-1/4 x 11-3/4 Large Router Plate – Router Lift Kit For Kreg Jessum Woodpecker & Peachtree - Router Lift Systems w/Router Plate Insert Ring & Set of Hex Keys

  • Router Table Lift: Raise your woodworking to a new level with this pro lift router tool. Our Rockler router lift 9.25” x 11.75” plate is ideal for....
  • Adjust The Height: Use the fine adjustment gear to set the final height to within 0.001''. All this is achieved more quickly, more efficiently, and....
  • Fits Most Routers: This woodworking router table works with router motors with a 4.2'' diameter (13.85'' circumference), like the Porter-Cable 7518....
  • Easy Router Bit Changes: Raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments—Snap-Lock....
  • What’s Included? Our pro lift includes (1) Rockler Pro Lift Router Lift, (1) Aluminum router plate (3/8'' thick), (1) Router Ring (1-1/2'' I.D.),....
Check Stock

JessEm Rout-R-Table Stand Bundle with JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, Mast-R-Fence II Router Table Fence and JessEm Rout-R-Lift II Router Lift (4 Items)

  • Bundle Includes: JessEm Rout-R-Table Stand, JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, JessEm Mast-R-Fence II Router Table Fence, JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5-Inch Diameter Motors.
  • Aluminum Dual Track: The JessEm Mast-R-Top comes with an extruded anodized aluminum dual track with a T-slot that accepts standard 1/4-inch hex head bolts or hex nuts and a standard 3/4-inch miter slot.
  • Router Table System: The table top comes pre-machined to fit JessEm’s Mast-R-Lift, Rout-R-Lift II, and Rout-R-Plate lift and router plates for building a router table system.
  • Premium Material: Made from laminated phenolic, which is one of the strongest, stable, and durable materials available for an industrial strength work surface.
  • Compatibility: The Table Top features a centered router opening measuring 9-1/4 x 11-3/4 inches that accepts most standard router plates and lifts (3/8-inch thick).
Check Stock

SHOUD Router Lift for 65mm Diameter Motors,Woodworking Router Table Insert Plate Lift Base,Max Lift 51mm Woodworking Engraving DIY Tools

  • Router Lift Material:Made of high quality aluminum alloy and stainless steel with plate size approx.240 * 200mm.CNC processing, stainless steel support rod..
  • Router Lifting Mode:manual lifting, equipped with manual lifting lever.Installation screw hole position: 70 * 62mm.Maximum lifting stroke: 51mm (2 inches).
  • Easy to install:Woodworking router table insert plate lift base is equipped with 4 mounting screws, just fix the threaded support rod on the table.
  • Super Lift Stroke:Generally, the more expensive lifting base can only lift 40mm (1.57 inches). This product can be lifted to 51mm (2 inches), 1mm per revolution.
  • Widely Used:Router lift is suitable for workbenches, woodworking handstand electric milling handstand wood, etc. It can clamp the trimming machine with a diameter of 64~66mm..
Check Stock

SKIL SRT1039 Benchtop Portable Router Table

  • ABOVE THE TABLE ROUTER LIFT: Gain convenient access to router bits with the Above Table Adjustment provided by the SKIL SRT1039 all-inclusive Router Table.
  • INTEGRATED BIT STORAGE: Protect and store router bits with a double door, quick latch integrated bit case. This integrated bit storage saves you time and provides a central location for easy to lose bits.
  • PRECISION ROUTING: Router tool features a flat laying aluminum miter gauge slot, aluminum mounting plate, router clamp, and two featherboards for durable, accurate routing.
  • LARGE ALUMINUM FENCE: The tall 16-inch aluminum fence measures 24 inches wide and can handle tall stock with ease, while the fence is complete with adjustable MDF face plates and a starter pin and guard for smooth operation with taller work pieces.
  • TWO FEATHERBOARDS: Two easy to use, adjustable router edge guides attach to the fence and router table to provide additional guidance and protection against kickback.
  • ROUTER CLAMP: Allows you to easily access tools attached underneath the table.
Check Stock

Next Wave PRO RS1000 two Axis CNC Router Table setup for Dovetail, Box Joint, Rabbet, Dado, Lock Miter

  • The SHARK RS1000 PRO allows you to type in any desired measurement, press OK, and it will accurately move to that exact dimension, even if it is only one-thousandth of an inch, no more bumping or nudging needed!.
  • Toggles between input inches as fractions, decimals, or metric measurements so you don’t have to convert dimensions.
  • Fence and lift move accurately in direct relationship to the bit with movement as little as .001”.
  • WHAT IS INCLUDED: 3-1/2 inch travel CNC Servo Motor driven Router Lift, Fence with Feather Boards, , Control Pendent and software, CNC Servo Motor driven Fence, Includes template for cutting Hole in your home made Table top..
  • WHAT IS NOT INCLUDED: PRO Sliding Miter, Router Table Top or stand, Router motor(You will need to provide a router Motor with a 3-1/2 inch diameter Motor can, Bits,.
Check Stock

Router Lift, Metal Router Lift System Kit for Router Table Saw Insert Base Plate, 4 Jaw Clamping, with Strong Grip

  • DIY ROUTER LIFT TABLE: This lifter base is suitable for making your own router worktable for high precise woodworking, easy to install and operate. NOTE: Only include lift part, not included insert plate! The other parts pictured are for display purposes only and need to be purchased separately (link on the details page below).
  • FIRM CLAMPING: The router lift base adopts 4 jaw clamping way, the clamping is firm and stable, not easy to fall off..
  • WIDE LIFTING RANGE: The base supports lifting height up to 51mm, supports machine diameter is 64mm to 66mm, ideal for small trimming machines..
  • EXCELLENT MATERIALS: Composed of aluminum alloy body and stainless steel support rod, with high strength, rust and corrosion resistance..
  • EASY ADJUSTMENT: Come with crank handle, you can easily and accurately adjust the height of the router bit from above the desktop..
Check Stock

JessEm 02120 Mast-R-Lift II Router Lift with Top Plate and 10-Piece Insert Ring Kit with Caddy for Router Plates and Lift Systems (2 Items)

  • Bundle Includes: JessEm 02120 Mast-R-Lift II Router Lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
  • Built-In Locking Mechanism: Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations.
  • Compatibility: With a standard top plate, Mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system.
  • Sturdy Construction: Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off.
  • Lift Shafts: The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.
Check Stock

Router Table Lift System, Aluminum Alloy Stainless Steel Simple Operation Router Lift Base Sturdy 4 Jaw Clamping for Small Trimming Machines

  • DIY ROUTER LIFT TABLE: This base is suitable for making your own router worktable for high precise woodworking, easy to install and operate..
  • EXCELLENT MATERIALS: Composed of aluminum alloy body and stainless steel support rod, with high strength, rust and corrosion resistance..
  • FIRM CLAMPING: The router lift base adopts 4 jaw clamping way, the clamping is firm and stable, not easy to fall off..
  • EASY ADJUSTMENT: Come with crank handle, you can easily and accurately adjust the height of the router bit from above the desktop..
  • WIDE LIFTING RANGE: The base supports lifting height up to 51mm, supports machine diameter is 64mm to 66mm, ideal for small trimming machines..
Check Stock

INCRA Mast-R-Lift-II Router Lift

  • Exclusive INCRA MagnaLOCK reducing ring system (3/8-Inch, 1-Inch, 1-5/8-Inch, 2-5/8-Inch, 3-5/8-Inch) for instant ring changes and perfect ring fit.
  • Change router bits from the top of the table. Quickly make super precise, 0. 001-Inch height adjustments from above.
  • 9-1/4-Inch x 11-3/4-Inch x 3/8-Inch plate size is compatible with all INCRA Router Tables and fits some other brands.
  • Exclusive ball bearing mechanism for super smooth action and low friction.
  • Patented thread tensioning system eliminates vertical lash in the lift mechanism. Ultra-responsive, direct drive 16TPI lift screw mechanism.
Check Stock

JESSEM Mast-R-Lift Excel II Included Complete Router Table System

  • Includes JessEm Mast-R-Lift Excel II for most cylinder router motors.
  • 32" x 24" phenolic table with aluminum extruded miter track & T-track.
  • Extruded aluminum router table fence with fully adjustable fence faces.
  • Rigid, heavy-duty steel stand with upper and lower stretchers.
  • Optional Digital Readout Attachment and Pow-R-Tek Remote Power Switch not included.
Check Stock

JessEm ROUT-R-LIFT II ROUTER TABLE PACKAGE for PORTER CABLE/DEWALT/BOSCH

  • JessEm included all you need for a top of the line system which includes the Rout-R-Lift II all new router lift solution..
  • Includes: Rout-R-Lift II (comes with 3 insert rings, 1-3/8'', 2'', 2-1/2''), Mast-R-Fence III (04400), Mast-R-Top (03006), Rout-R-Table Stand (05005),....
  • Compatible with Porter Cable 690/890, Bosch 1617/1618, DeWalt 610/618, Craftsman 17543/17540/28190..
Check Stock