Reviews Router Module

Wifi Relay Module, 5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch

  • 2 WORKING MODES---Mode 1: The phone is directly installed on the WiFi module.
  • Mode 2: Equipped with a mobile phone and WiFi module on the router.
  • Additional features: It can also be used as a USB relay when the ESP-01 is pulled out.
  • TRANSMISSION DISTANCE---In an open environment, when the mobile phone is installed on the WiFi module, the maximum stable transmission distance is 100M. When the WiFi module and the mobile phone are simultaneously carried on the router, the transmission distance depends on the signal strength of the router.
  • SMARTCONGIG TECHNOLOGY---Use smartcongig technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions.
  • SHORT RESPONSE TIME---On-board 5V,10A250V AC 10AV30V DC relay, which can continuously pull 100,000 times, with diode discharge protection and short response time. Onboard ESP-01 WiFi module and high performance microprocessor STM8S103.
  • OTHER EQUIPMENT---Board mode selection and real-time working status indicator. Reserved UART debug interface and STM8 SWIM program download interface.
Check Stock

ESP8266 Wire~Less Wi~Fi Transceiver Relay Module, 4 Channel DC 5V Smart Switch Relay Module for Smart Home Automation System IOT A~PP Con~Troller

  • SUPPORT TWO WORK MODE: Mode 1: cellphone carry on WIFI module directly. Mode 2: cellphone and WIFI module carry on router together..
  • TRANSMISSION DISTANCE: In the open environment,when mobile phone is carrying on the WIFI module ,maximum transmission distance is 100 meter. When the WIFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal..
  • SAFE: Optocoupler isolated output, safe and reliable..
  • LED INDICATOR: On board relay LED indicator , mode option and working statue LED indicator..
  • SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied..
Check Stock

Bingfu 4G LTE Antenna 8dBi Magnetic Base MIMO SMA Male Antenna (2-Pack) Compatible with 4G LTE Wireless CPE Router Cellular Gateway Industrial IoT Router

  • Compatible Carrier Network: Verizon, AT&T, T-Mobile, Sprint and etc.
  • Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz.
  • Package List: 2 x Antenna (As the Picture Shown).
  • Compatible with 4G LTE Mobile Router, Mobile Broadband Modem Hotspot, CPE Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular.
  • Compatible with 4G LTE Cellular Trail Camera, Game Camera, Hunting Camera, Outdoor Security Camera, Celluar Surveillance Camera.
  • Vehicle 4G LTE Tracker, Real Time Monitor, Mobile Vehicle Car DVR MDVR Video Recorder.
  • Compatible with Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal, Cellular Embedded Module, Remote Metering and SMS Alarm, Remote SCADA DAQ Module, Remote Relay Gate Opener Switch, Vending Machine, Digital Signage, Delivery Locker, Cellular Temperature Humidity Sensor Monitoring System, GSM Alarm System, Wireless Security Sensor Motion Detector Alert.
Check Stock

Bingfu 4G LTE 7dBi Magnetic Base MIMO SMA Male Antenna (2-Pack) Compatible with 4G LTE Wireless CPE Router Hotspot Cellular Gateway Industrial IoT Router

  • Compatible Carrier Network: Verizon, AT&T, T-Mobile, Sprint and etc.
  • Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz.
  • Package List: 2 x Antenna (As the Picture Shown).
  • Compatible with 4G LTE Mobile Router, Mobile Broadband Modem Hotspot, CPE Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular.
  • Compatible with 4G LTE Cellular Trail Camera, Game Camera, Hunting Camera, Outdoor Security Camera, Celluar Surveillance Camera.
  • Vehicle 4G LTE Tracker, Real Time Monitor, Mobile Vehicle Car DVR MDVR Video Recorder.
  • Compatible with Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal, Cellular Embedded Module, Remote Metering and SMS Alarm, Remote SCADA DAQ Module, Remote Relay Gate Opener Switch, Vending Machine, Digital Signage, Delivery Locker, Cellular Temperature Humidity Sensor Monitoring System, GSM Alarm System, Wireless Security Sensor Motion Detector Alert.
Check Stock

Bingfu 4G LTE Antenna 9dBi SMA Male Cellular Antenna (2-Pack) Compatible with 4G LTE Wireless CPE Router Hotspot Cellular Gateway Industrial IoT Router Trail Camera Game Camera Outdoor Security Camera

  • Compatible Carrier Network: Verizon, AT&T, T-Mobile, Sprint and etc.
  • Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz.
  • Package List: 2 x Antenna (As the Picture Shown).
  • Compatible with 4G LTE Mobile Router, Mobile Broadband Modem Hotspot, CPE Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular.
  • Compatible with 4G LTE Cellular Trail Camera, Game Camera, Hunting Camera, Outdoor Security Camera, Celluar Surveillance Camera.
  • Vehicle 4G LTE Tracker, Real Time Monitor, Mobile Vehicle Car DVR MDVR Video Recorder.
  • Compatible with Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal, Cellular Embedded Module, Remote Metering and SMS Alarm, Remote SCADA DAQ Module, Remote Relay Gate Opener Switch, Vending Machine, Digital Signage, Delivery Locker, Cellular Temperature Humidity Sensor Monitoring System, GSM Alarm System, Wireless Security Sensor Motion Detector Alert.
Check Stock

Bingfu 4G LTE Adhesive Magnetic Mount Antenna MIMO SMA Male 4G LTE Antenna Compatible with 4G LTE Wireless Router Home CPE Router Mobile Modem Hotspot Industrial IoT Router Cellular Gateway

  • Compatible Carrier Network: Verizon, AT&T, T-Mobile, Sprint and etc.
  • Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz.
  • Package List: 1 x MIMO Antenna (As the Picture Shown).
  • Compatible with 4G LTE Mobile Router, Mobile Broadband Modem Hotspot, CPE Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular.
  • Compatible with 4G LTE Cellular Trail Camera, Game Camera, Hunting Camera, Outdoor Security Camera, Celluar Surveillance Camera.
  • Vehicle 4G LTE Tracker, Real Time Monitor, Mobile Vehicle Car DVR MDVR Video Recorder.
  • Compatible with Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal, Cellular Embedded Module, Remote Metering and SMS Alarm, Remote SCADA DAQ Module, Remote Relay Gate Opener Switch, Vending Machine, Digital Signage, Delivery Locker, Cellular Temperature Humidity Sensor Monitoring System, GSM Alarm System, Wireless Security Sensor Motion Detector Alert.
Check Stock

Bingfu 4G LTE SMA Male MIMO Antenna Outdoor Fixed Bracket Wall Mount Waterproof Antenna for 4G LTE Wireless CPE Router Hotspot Cellular IoT Gateway Industrial Terminal Server Security Camera

  • Compatible Carrier Network: Verizon, AT&T, T-Mobile, Sprint and etc.
  • Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz.
  • Antenna Mounting Screws Diameter: M12 11.76mm-11.95mm.
  • Package List: 1 x Antenna, 1 x Wall Mount Bracket, 4 x Self-tapping Screws (As the Picture Shown).
  • Compatible with 4G LTE Mobile Router, Mobile Broadband Modem Hotspot, CPE Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular.
  • Compatible with 4G LTE Cellular Security Surveillance Camera.
  • Vehicle 4G LTE Tracker, Real Time Monitor, Mobile Vehicle Car DVR MDVR Video Recorder.
  • Compatible with Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal, Cellular Embedded Module, Remote Metering and SMS Alarm, Remote SCADA DAQ Module, Remote Relay Gate Opener Switch, Vending Machine, Digital Signage, Delivery Locker, Cellular Temperature Humidity Sensor Monitoring System, GSM Alarm System, Wireless Security Sensor Motion Detector Alert.
Check Stock

Bingfu 4G LTE Outdoor Wall Mount Waterproof Antenna SMA Male Antenna Compatible with Verizon AT&T T-Mobile Sprint 4G LTE Router Gateway Modem Cellular Trail Camera

  • Compatible Carrier: Verizon, AT&T, T-Mobile, Sprint and etc.
  • Frequency Range: 698-960 MHz, 1710-2170 MHz, 2300-2700 MHz.
  • Antenna Mounting Screws Diameter: M12 11.76mm-11.95mm.
  • Package List: 1 x Antenna, 1 x RP-SMA Connector Adapter, 1 x Wall Mount Bracket, 4 x Self-tapping Screws (As the Picture Shown).
  • Compatible with 4G LTE Mobile Router, Mobile Broadband Modem Hotspot, CPE Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular.
  • Compatible with 4G LTE Cellular Trail Camera, Game Camera, Hunting Camera, Outdoor Security Camera, Celluar Surveillance Camera.
  • Vehicle 4G LTE Tracker, Real Time Monitor, Mobile Vehicle Car DVR MDVR Video Recorder.
  • Compatible with Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal, Cellular Embedded Module, Remote Metering and SMS Alarm, Remote SCADA DAQ Module, Remote Relay Gate Opener Switch, Vending Machine, Digital Signage, Delivery Locker, Cellular Temperature Humidity Sensor Monitoring System, GSM Alarm System, Wireless Security Sensor Motion Detector Alert.
Check Stock

4-Channel WiFi Wireless-Relay Switch Module - Smart Momentary Inching Controller,DC 7-32V DIY Remote Control Garage Door,Compatible with Alexa Echo Google Home IFTTT

  • DC 5V WIFI Relay Module,working model Inching or Self-locking ,change work mode by pressing the mode button on board. default inching time is 0.5 second,if need to change inching time,you have to set it to self-lock mode firstly by pressing mode button,then adjust inching time in ewelink app..
  • WIDELY USE,The WiFi Smart Switch Module can be applied to 97% home appliances,add wifi to your garage door opener lights fireplace computer.Support 2.4G WIFI only,if your router with dual bands and same SSID,please change to different SSID or close 5G firstly.When pairing,please be sure to put the relay close to your router.if can't configure with quick mode,please try to use compatible mode.
Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • ✅Powerful 500W Spindle : 3-Axis CNC router machine will allow you do both caving and engraving, with powerful 500w spindle 21000RP, will allow you to engrave more harder materials such as acrylic plastic and wood, meanwhile greatly improve work efficiency. Engineered for home and business use..
  • ✅2-in-1 Wood Carving and Engraving Machine : LAKIX CNC router milling machine compatible with spindles and laser module, will allow you do both engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
  • ✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
  • ✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quie....
Check Stock

CNCTOPBAOS 3 Axis Desktop DIY Mini CNC 3018 Router Kit GRBL Control Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine Working Area 30x18x4.5cm

  • According to the instructions,the machine is easy to assemble..
  • ♞【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • Nema17 stepper motor 1.3A/0.25N.m/42x42x34mm.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Working area】30x18x4.5cm.
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux.
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change ....
Check Stock

Bingfu Cellular 4g LTE SMA Antenna – with TS9 Splitter Cable – Compatible with Verizon AT&T T-Mobile Sprint 4G LTE Mobile Hotspot MiFi Router Cellular Mobile Broadband Modem USB Modem Dongle Adapter

  • with RP-SMA Male Adapter and SMA Female to Dual TS9 Connector Splitter Cable.
  • Package List: 1 x Antenna, 1 x RP-SMA Connector Adapter, 1 x Wall Mount Bracket, 4 x Self-tapping Screws, 1 x SMA Female to Dual TS9 Connector Splitter Cable (As the Picture Shown).
  • Compatible with 4G LTE Mobile Router, Mobile Broadband Modem Hotspot, CPE Router, Cellular Gateway, Vehicle Car Truck RV Bus Van Mobile Cellular.
  • Compatible with 4G LTE Cellular Trail Camera, Game Camera, Hunting Camera, Outdoor Security Camera, Celluar Surveillance Camera.
  • Vehicle 4G LTE Tracker, Real Time Monitor, Mobile Vehicle Car DVR MDVR Video Recorder.
  • Compatible with Industrial 4G LTE Router, Cellular IoT Gateway, 4G LTE M2M RTU DTU Terminal, Cellular Embedded Module, Remote Metering and SMS Alarm, Remote SCADA DAQ Module, Remote Relay Gate Opener Switch, Vending Machine, Digital Signage, Delivery Locker, Cellular Temperature Humidity Sensor Monitoring System, GSM Alarm System, Wireless Security Sensor Motion Detector Alert.
Check Stock

CNC 3018 Pro Max 3 Axis Desktop DIY Mini Wood Router Kit Engraver Woodworking PCB PVC Milling Engraving Carving Machine GRBL Control with ER11 Collet (3018 Pro Max)

  • ♞【Upgrade Version CNC3018 Pro Max】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers.
  • 3018 PRO MAX machine is very easy to install,stable structure,our parcel also include english user manual..
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux.
  • Supporting files:G-code (.nc/.txt/.tape/.gcode).
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and ot....
Check Stock