Reviews Router Bits With Long Flutes

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Vipbhtool 1/4 Inch Shank Spiral Flush-Trim Router Bits Milling Spiral Flush Trim Bit Router Bits Pattern Bit Solid Carbide Flush Trim CNC Down Cut Spiral Router Bits

  • 1/4 Inch Spiral Flush Trim Router Bits. Shank: 1/4 inch.
  • Spiral Flush-Trim Router Bits Solid Carbide Flush Trim Router Bit 1/4-Inch Shank Spiral Flush Trim Down Cut. The design down-cut sharp flutes would eject chips more quickly from the routing materials..
  • Can be used with handheld, table-mounted and CNC routers. Flush trim all types of material for a perfect finish. Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. The bit features high quality carbide for more efficient material removal. Each bit is manufactured from high quality steel for added durability and long life..
  • Made of Solid Carbide, Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool, provide precise, efficient cuts and offers extreme durability. Precison finish and micro-grain carbide could assure of good performance and long tool life..
  • Our Down Cut Spiral Router Bits Redesigned with permanent bearing retaining collar to reduce trimming mishaps. For use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals. Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists..
Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock

HQMaster Combination Kit Set Router Bits Cutter Cutting Milling Tool (4 Type, Each 10Pcs) Including Flat/Ball Bits, 10 V-Shape Engraving Bits

  • Cost-effective bits: package include 4 type bits each 10pcs assorted in 4 storage cases meet most standard milling applications).
  • Perfect cutting: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal. made of quality ultral fine tungsten carbide material.
  • Excellent cutting results and enhanced productivity.
  • Wide Compatibility: compatible with most desktop or industrial CNC machines. Used for carving, engraving, milling, dadoing, boring, routing, slotting in materials like density board, wood, acrylic, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Used for PCB, SMT, the CNC, mold, plastic, thin copper/aluminum/stainless steel and other precision metal parts processing.
  • High efficiency: These bits own sharp edge which is able for fast engraving that makes high efficiency.
  • Fast chip-removal speed leaves an unobstructed path for the end mill.
  • Well made & Excenllent Performace: Mirror polishing and space of Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
Check Stock

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
  • This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
  • Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.
Check Stock

Amana Tool - 46202-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia

  • SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action....
  • FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits..
  • CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate,....
  • SOLID CARBIDE – Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a....
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in....
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

Router Bits 1/4 Shank, Router Bit Set 15 Pcs, Roundover Router Bit 1/4 Shank - Carbide Router Bits for Wood, Woodworking, DIY

  • ✎[Router Bit Set] - 100% brand new and good quality router bits 1/4 shank boasts alloy blade, balanced craftsmanship and a solid hardened steel board with anti kickback design ensures safe installation. Rigid router bits carbide are all have a hardened solid alloy steel construction with Build-up & heat resistant Teflon coating, Carbide Edge for durability and longevity. These wood router bits set can withstand some heavy duty use and the test of time.
  • ✎[Perfectly Matched Router Bits] - 1/4 shank router bits set precisely match the requirement of the American dimension and standard. Each router bit has a 1/4-inch universal shank which fits all models of routers, carbide router bits 1/4 shank is compatible with all major router instrument (either handheld or benchtop router table) such as MNA, Kowood, Bosch, DeWalt, Makita, Tooldo, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker.
  • ✎[Great Value 15 Piece Router Bits Set] - Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood, Cutters (C3 Micro-grain Tungsten Carbide) to slice smoothly into stock, clean, splinter free, prominent advantages in practical use. Select bits featuring a bearing roller for smooth and aligned operations. Well-construct....
Check Stock

HOZLY 1/8 Inch Shank Carbide End Mills(3.175x17mm) Up & Down Cut CNC Spiral Router Bits 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Composite Multilayer Pack of 5

  • Up Down Cut,1/8″ Shank X 1/8″Cutting Dia, 17mm Flute Length with 2 Spiral Flutes, Total length 38 mm, 5 pieces per pack.
  • The Unique Flute Design makes cutting process easier and faster, Smooth Cutting Without 2nd polishing process, ALTIN-Coated Improved the bits service life.
  • Due to the Great hardness of solid Tungsten carbide, it provides excellent abrasive and wear-resistance, Bits Stay Balanced during High Speed rotation process.
  • Fast Chip-Removal volume and Speed, Non-stick With bits, Suitable For Composite multilayer board, hard wood, polywood, acrylic.
  • Double Flute Spiral Solid Carbide Up-Down Cut End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes.
Check Stock

SpeTool 1/4' Shank 1' Cutting Diameter Spoilboard Surfacing Router Bit Insert Carbide Slab Flattening Router Bit 2-Wing Planing Bit Wood Bottom Cleaning Planer Bit

  • This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking.
  • Carbide Inserts 10*10*2.2mm,the inserts will be available on asin "B09CPDVBSG".
  • Contains two cutting flutes and two up-shear scorers, which provide a smoother finish at the bottom of the cut than traditional two-knife style router bits.
  • MDF, LDF, fiberboard, plastic, plywood, hardwood, softwood, etc.
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

HQMaster CNC Router Bit 1/8” Shank Ball Nose End Mill Titanium Coated Spiral Milling Cutter Cutting Diameter 1/1.5/2/2.5/3.175mm Engraving Carving Tool Set Tungsten Steel for MDF Acrylic Wood PVC 10Pcs

  • PACKAGE CONTENTS: 10pcs Titanium coating ball nose upcut bits assorted in storage case. Number of Flutes: 2. Material: Solid Carbide..
  • DIMENSIONS: Shank diameter: 1/8 (3.175mm).
  • cutting edge diameter: 1mm/1.5mm/2mm/2.5mm/3.175mm, cutting edge length (CEL)/flute length: 4mm/6mm/8mm/12mm, overall length: 37-38mm.
  • RANGE OF PROCESSING: for cutting/engraving/carving/sculpturing/roughing/milling in materials like MDF, ABS, PVC, acrylic, density board, wood, plywood, rosewood, hardwood etc..
  • HIGH EFFICIENCY: these bits own sharp edge which is able for fast engraving that makes high efficiency.
  • durable, high precision and not easy to break.
  • it is smokeless and burr-free while processing.
  • PERFECT CUTTING: the design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
Check Stock