Reviews Round Shank Teeth

DEWALT DW5224 1/4-Inch by 4-Inch Carbide Hammer Drill Bit , Silver

  • ROCK CARBIDE tip maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck.
Check Stock

DEWALT DW5223 3/16-Inch by 6-Inch Carbide Hammer Drill Bit,Silver

  • ROCK CARBIDE tip maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck.
Check Stock

Klein Tools 6934INS 1000V Slim Tip Insulated Screwdriver, 4-Inch Round Shank, #2 Phillips Tip, Cushion Grip Handle

  • Slim Tip Insulated Screwdriver #2 Phillips 4" Round Shank.
Check Stock

Chiloskit 3 Flute 90 Degree HSS Chamfering Tool Bit Countersink Drill Bit Set for Metal Wood, Pack of 6pcs

  • Set of 6 countersink drill bits with precision-ground 90-degree tips for drilling into wood, metals, rubber, plastic, and more.
  • Material of Drill Bit:High speed steel 4241 , classic high speed steel have a long service life,druability, resist corrosion and very strong..
  • Used in hardness 25 ° below the workpiece, such as carbon steel, sheet iron, insulation board,3 Flute design: with 3 flutes and staggered cutting teeth, these 90 degree high speed steel deburring tools ensure chip flow smoothly, fast cutting, no chatter, more concentric and easier to use.
  • Great for Sinking 90 Degree Holes into Wood and Metals Countersunk Screws and Fixings.Suitable for DIY, Home and General Building/Engineering Using..
  • Size : In the picture.Shank: round shank.Great gift for man DIYer . We will promise that our products are 100% brand new..
Check Stock

Garden Auger Drill Adapter, SDS Plus to 1/2-Inch(M13 x 15mm) Thread Keyless Drill Chuck Adapter Round Shank for Impact Driver,Drive Hammer Drill

  • Compatibility: Fit 10mm dia round shank to 1/2" thread adapter for drill chuck..
  • Material: Garden Auger Power Drill Adapter is made of durable steel with 4 flats on the 0.36 inch shank to match up with the chuck teeth on your hammer drill..
  • Note: If the adapter need to work with a thread locker when there for a reverse motion, you can always use a thread locker on the screw holding the two pieces together to resolve this problem..
  • Size: Overall Length: 4.1 inches, Body Diameter: 0.77 inch..
  • Application: Adaptor connects drill to Earth Augers..
Check Stock

ZOENHOU 2 Set 3 Inch 75 mm Hole Saw with Arbor, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter, Hole Drilling Tool Drill Bit Saw for Cutting Wood, Metal, Plastic, Fiberboard

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi-metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.43 inch hex shank arbor with two pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL- This complete HSS hole cutter including 2 pieces 2-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.43 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 3 Inch 75 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

VEVOR Hitch Mounted Ripper, 18' Shank Length Box Scraper Shank, 4 Hole Site Box Blade for Tractor, 2 Locating Pins Ripper Shank, 2 Plough Tips Box Blade Shank Teeth

  • 4 Adjustable Hole Sites: Hole Spacing: 2 in / 5 cm. The hitch-mounted ripper has multiple depth Settings, adjustable for different operating depths, adding two more holes than most similar products. In addition, the box scraper shank is equipped with a shear bolt to protect the hitch and leg..
  • Carbon Steel Material: The box blade for the tractor is made of high carbon steel with high strength and resistance to deformation. The spray paint coating on its surface insulates metal from direct contact with air and effectively prevents rust and corrosion..
  • Complete Accessories: We come with an additional replaceable plow tip and mounting pin. The ripper shank has full accessories: 18" length adjustable shank, two ripper teeth, two mounting hooks, shear bolts..
  • Effortless Installation: In just three steps, the box blade shank teeth can be installed by hand. Firstly, install the shear bolt.
  • Versatile Applications: Ripper shank for box blade is widely used, compatible with most ATV/UTV and 2-inch receivers, and recommended for CAT 0 and CAT 1 tractors..
Check Stock

EZARC Reciprocating Saw Blade Bi-Metal Cobalt Sabre Saw Blades for Metal Cutting 6-Inch 14TPI R622PM 5-Pack

  • 【Long-Life Teeth】 Teeth made of bI-metal with 8% Cobalt which makes EZARC reciprocating saw blades with 2times longer life comparing with normal....
  • 【Metal Master】 Hard cobalt edge provide effortless cutting into sheet metal, metal pipe and profile..
  • 【Cutting Capacity】 Blades cut through medium to thick sheet metals 3-8 mm, solid pipes/profiles diameter < 100mm..
  • 【Optimized Design】 0.9 thin wall and set teeth design helps to reduce heat build up and maximize your cutting efficiency..
  • 【Universal shank】 1/2 inch shank fits all Sawzall tools on the market including Bosch, Dewalt, Milwaukee Sawzall Saw, SKIL, Makita, Black &....
Check Stock

ZOENHOU 2 Set 4 Inch 102 mm Hole Saw with Heavy Duty Arbor, Hole Cutter HSS Bi-Metal, Heavy Duty Steel Blade Hex Shank Drill Bits Smooth and Fast Cutting of Wood, Iron, Hard Plastic, Galvanized Pipe

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.44 inch hex shank arbor with 2 pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling the saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL - This complete HSS hole cutter including 2 pieces 4-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.44 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 4-Inch 102 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our top priority..
Check Stock

DEWALT DW3762H 4-Inch 10TPI Laminate Down Cutting HSC T-Shank Jig Saw Blade (5-Pack)

  • Precision ground teeth stay sharper longer and deliver smooth, clean cuts.
  • Deeper gullets with increased free space remove more material for faster cutting.
  • T-shank design fits all Bosch and DEWALT jig saws.
Check Stock

0.27 Caliber Green Shot Strip Loads, Power Fasteners Actuated Powder Loads (100-Count)

  • Washer pins - powder fastener actuated fastening system, Increases bearing surface against the material to be fastened..
  • Shank diameter = .14Shank diameter = .145.
  • Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
Check Stock

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

  • ...ength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
  • 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
  • 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
  • arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
  • with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill or machine drill.
  • HSS bi-metal hole saws are much better than and totally different from any carbon steel ones (work on wood only, no metal)..
  • Packed in high quality carrying case. Please note that it shows "HSS M3" on the carrying case but actually it is made of HSS M42 with cobalt 8%. You could see it on the hole saws.DescriptionHSS M42 with cobalt 8% bi-met....
Check Stock

EZARC Reciprocating Saw Blade Bi-Metal Cobalt Sabre Saw Blades for Heavy Metal Cutting 6-Inch 14TPI R626PM+ 5-Pack

  • 【Cobalt Teeth】 M42 with cobalt teeth makes the blade resist high temperatures on heavy metal cutting demolition works..
  • 【Metal Master】 Hard cobalt edge provide effortless cutting into sheet metal, metal pipe and profile..
  • 【Optimized Design】 Enhanced version of the blade is more wear-resistant for cutting heavy metals show better performance..
  • 【Cutting Range】 Medium-thick sheet metals (3 to 10mm), metal pipes/profiles (dia..
  • 【Universal shank】 1/2 inch shank fits all Sawzall tools on the market including Bosch, Dewalt, Milwaukee Sawzall Saw, SKIL, Makita, Black &....
Check Stock