Reviews Round Milling Machine

2 Axis Metal Case LCD DRO Digital Readout Display for Mill Milling/Lathe Machine (2 Axis DRO)

  • ...Meanwell Power supply ,Omran Key button.Switch on& Switch off can meet more than 100000 times.
  • [HIGH Performance】-Acceptable resolution: 10um ,5um ,2um ,1um , 0.5um.
  • Min resolution of digital display angle :0.0001/pulse, Linear Scale/Magnetic scale Interface: DB9(TTL/EIA-422-A).
  • 【Wide Application】Applicable for milling machine, drilling machine, grinding machine, lathes, profile projector, video measuring machine, position monitoring, coordinate measurement,.
  • 【Special Function】1:Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value .Once the tool number is inputted, the DRO value will be saved. 2 :Determine the workpiece centre: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece centre.
  • 3 :200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator Round arc processing: Sample round processing and two axis arc processing.
  • 4:Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece..
Check Stock

Tribest Solo Star-II SS-9002-220V Single-Auger Juice Extractor, 220V, NOT FOR USA USE (European Cord)

  • 220v, ul & ce approved and comes with 5 year warranty.
  • Includes accessories for making flat pasta, round noodles and for milling mochi.
  • This 220V machine is not rated for US use, for domestic version see item SS-9002.
  • Expertly designed and constructed from only the finest, most durable materials.
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

YXQ 4.9 inch 2 Spoke Hand Wheel with Folding Revolving Handle Black for Milling Machine, 12mm Center Bore Diameter

  • ▶HIGH-QUALITY MATERIALS: The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • ▶DESIGN STANDARDIZATION: These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • ▶SIMPLE ASSEMBLY: The round handwheel come with revolving handle, hand wheel has threaded hole for easy handle assembly.
  • ▶WIDELY USED: It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
  • ▶APPLICATION: Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
Check Stock

D26 Milling Machine Ball Handle Three Ball Handles Three Ball Rocking Handle Three Pills Handle Ball Crank 16mm Inner Hole Diameter

  • The milling machine's three-ball crank is made of high-hardness material and is durable enough for most milling machines and work benches..
  • The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use..
  • The olive-shaped hand-held part of the three-ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load..
  • The inner diameter of the three-ball crank of the milling machine is about 16mm in diameter, which is closely connected with other parts of the milling machine and is easy to operate..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock