Reviews Round Insert Cup Glide 2

GorillaRisers CB251-8 Screw on Furniture Risers (8 Pack) Floor Protector Slider Legs Raise Chair or Table Height 1-1/4” to 1-1/2\

  • ...ure that needs a lift (adds 1-1/2” with plastic glide installed and 1-1/2” with felt glide).
  • SAFE SLIDING ON ALL HARD SURFACES – These slider feet floor protectors for chairs and furniture provide smooth and quiet gliding on hardwood, laminate, vinyl plank, bamboo, vinyl tile, LVT, ceramic, LVP with Felt Glide insert and low pile carpet & rugs, tile and all other smooth hard surface floors with Plastic Glide insert.
  • FITS 1 INCH DIAMETER & UP FURNITURE LEGS – Designed for secure and easy screw on installation to furniture legs that are 1 inch wide at foot or larger making them the perfect solution for adding height to a chair, stool, table, desk or any furniture that is too low.
  • CARPET SLIDER & FELT GLIDE COMBO PACK – Pack includes 8 Gorilla Raisers that are 1 inch round (25mm) x 1.25” tall (32mm), 8 premium wool felt glide caps for sliding on hardwood floors, 8 plastic glide caps for sliding on carpet and hard surface floors, and 8 screws for secure installment under furniture.
  • HEAVY DUTY + 1 YEAR WARRANTY – Constructed for durability and dependability, this set of 4 furniture slider riser legs supports up to 520 pounds (130 pounds per leg) and is backed by Slipstick’s 1-year free replacement warranty should any product fail due to premat....
Check Stock

24 Pack of 1.5

  • Patio surface protector – The glide protector provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio and protects your patio surface, patio chair feet and patio legs from damage..
  • What you get – 24 packs glide protector.
  • Premium Material – Made of high quality PA66 nylon material, the cap insert are thicker and more durable than other standard caps..
  • 90 days hassle free replacement or refund, please contact us if you need any help and we will reply you ASAP..
  • Plenty Package – Each group of products contains 24 furniture cap replacement pieces..
  • ATTENTION – Our wrought iron chair glides have a diameter of 1.5” that fits most pieces of patio furniture and can be installed using a rubber hammer or mallet, measure the inner diameter of the cup area where the glide will be installed before ordering and scrape away any worn metal or remains of old cap before measuring..
Check Stock

Tupperware Large Square 2 Quart Pick a Deli Container in Red

  • Tupperware Pick-A-Deli Mini Round Container – color is Berry Bliss.
  • Approximate 2 Cup Capacity, measures about 6 inches high.
  • SMALL round container with strainer insert, good size for pickle slices, gherkins, olives, jalepenos, maraschino cherries.
Check Stock

Large Car Cup Holder Adapter Fits 8-40 OZ Bottles, kemimoto Car Cup Holder Extender Compatible with Hydro Flasks 32/40oz, Yeti 20/26/30oz, Nalgene, Fits Universal Vehicles, UTVs, Golf Carts, etc

  • ...so will hold your big size cups stably. The car cup adapter can hold 2.4"-3.7" diameter or 8-40 OZ bottles, cups, mugs, etc..
  • 【Vibra Resistance Rubber Base】 The solid rubber base is used to ensure that the car drink holder adapter firmly adapt to the console cup holder. It will fit regular round shape cup holder insert with diameter of 2.75-3.25 inches, which is compatible with most vehicles, RVs, Jeeps, golf carts, UTVs, etc..
  • 【Easy to Use & Install】Constructed by a one-piece water bottle adapter, just plug in and complete the installation, no need for any tools and worried about falling apart. In addition, the rubber tabs around the top can be removed when you use a large size cup..
  • 【Universally Adapted Design】This cup holder expander for car is designed to fit most vehicle. However, it may not be compatible with some car cup holders, for example, the cup holder is not round, located too close to the central dashboard or gear lever..
  • 【Must Have】The large cup extender holder can makes the low and small original car cup holder more compatible. What's more, the patent of our car cup holder converter is pending..
Check Stock

32 Pack of 1.5" Deluxe Wrought Iron Outdoor Patio Furniture Chair and Table feet Cup Glide Protectors Smooth Move

  • Premium Material – Made of high quality PA66 nylon material, the cap insert are thicker and more durable than other standard caps..
  • Patio surface protector – The glide protector provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio and protects your patio surface, patio chair feet and patio legs from damage..
  • Plenty Package – Each group of products contains 32 furniture cap replacement pieces..
  • ATTENTION – Our wrought iron chair glides have a diameter of 1.5” that fits most pieces of patio furniture and can be installed using a rubber hammer or mallet, measure the inner diameter of the cup area where the glide will be installed before ordering and scrape away any worn metal or remains of old cap before measuring..
  • What you get – 32 packs glide protector.
  • 90 days hassle free replacement or refund, please contact us if you need any help and we will reply you ASAP..
Check Stock

Dual Car Cup Holder Expander with Adjustable Base, 2 in 1 Multifunctional Expandable All Purpose Automotive Cup Holders Extender for Bottles Drinks Snacks

  • ... phones, drinks, coffee, food, ipad and fried chicken etc. The small holder can be place water bottle under 17 oz..
  • 【Adjustable Base & Stable】: By using the extendable base, it is easier and more convenient to install and take on multiple cars. The cup holder base is suitable for round cup slot, you just need to insert it into the car cup slot, rotate the cup holder expander to expand the bottom adapter and firmly fixed the base..
  • 【Suitable For Most Car】: This 2 in 1 car cup holder expander is suitable for most car models, while the car’s cup holder design varies greatly, may not be compatible with certain styles of cup holders that with sharp-angled. Please confirm the product size before purchasing..
  • 【Quality Assurance Service】: The upper holder with reinforced thick fence makes it more durable. The Base with car cup holder expander adapter makes it more firm and sturdy while driving.This car cup holder extender can helps you effectively use the space to store your small accessories , making your car seat tidy..
Check Stock

Stroller Cup Holder with Phone Organizer, 2-in-1 Universal Cup Holder, 360 Degrees Rotation Storage Rack for Stroller/ Pushchair/ Wheelchair/ Bike

  • ...t applies to trolley rods with a diameter of 1.77 in or less, mobile phones under 6.0 in, the stroller cup holder can meet the needs of babies and mothers to make shopping or traveling get more enjoyable.
  • 【Strong Stability】There are 4 elastic fixing strip at the bottom of the baby pushchair cup holder, which can insert and fix the baby bottle to prevent excessive shaking and falling. The cup holder fits for all kinds of baby bottles, drinks bottles and coffee cups.
  • 【Widely used】The stroller cup holder features strong compatibility. The clamp diameter is 0.5-1.3 in/12.7- 33 mm, can also rotate 360 degrees, which can be installed with a rod, round rod, flat rod, and it is suitable for Chico, Britax, Yeti, Vista, Joovy, Evenflo, Uppababy, Cruz, Baby Jogger, Bugaboo, Skiphop, gb, Silicone, Thule, BOB and 95% of stroller installation.
  • 【Premium ABS Material】 Safety and Environmental protection ABS materials are used to the pram cup holder. No odor and safe, strong and sturdy, more durable, which is safer to use.
  • 【 Anti-slip Design】The nut lock has a TPR non-slip pad. And 4 elastic fixing strip at the bottom of the baby pushchair cup holder, ensure that cups can keep steady in the pram cup holder even on the rough road. It can prevent the liquid....
Check Stock

1-1/2" Wrought Iron Chair Glide | White | Pack of: 25

  • These wrought iron chair glides fit a 1-1/2″ inside diameter cup on patio furniture feet..
  • Protects your patio surface, patio chair feet and patio legs from damage.Provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio..
  • Always scrape away any worn metal or remains of old cap- Before measuring and installing..
  • Glide installs inside the metal cup on the bottom of the chair or table. Be sure to measure the inner diameter of the cup area to purchase the corect glide..
  • Sunniland Patio Brand is sold exclusively by Sunniland Patio. Beware of imitations with lesser quality from other suppliers..
Check Stock

Furnigear Plastic Plugs Tubing End Caps Chair End Caps 3/4” Inner Size Tubing Caps Round Furniture Sliders Glides Black(40pack)

  • ❤Furnigear 3/4” Black Plastic Plugs End Caps (40pcs), perfect fit for 3/4” (0.68-0.75”) inner size of pipe tubing. Outside diameter is 0.78”. Warm tips: Please measure your chair leg (inner size) and choose correct size..
  • ❤Plastic Plugs for Use in Plugging Holes: Plastic hole plugs fit for stainless steel pipe, aluminum, metal and other tubular poles. Chair end caps keep sharp parts from being exposed, scratch the floor or accidentally injure your family..
  • ❤Chair Leg Caps Fit for Homemade and Outdoor Projects. Best chair glide for your kitchen stool legs, barstool chairs, fence post caps. Replacement for patio furniture leg protectors, stainless steel railing pipe, other tubular or any round opening..
  • ❤Easy to Install: Plastic plugs insert snapped right into tube or hammer plugs in. Installs easily and securely. Lasting protection and prevents scratching of your floor surface and protects your expensive furniture when furniture is moved..
  • ❤40 Pack 3/4″ Round Plastic Tubing end caps made by high quality plastic material and no odor smells，4.5mm thicken bottom, durable chair glide. Best furniture slider for carpet, moving easily. Chair leg inserts for metal legs, keeping securely..
Check Stock

Dual Cup Holder Expander for Car,2-in-1 Car Cup Holder with Adjustable Base,360°Rotating & Dual Car Cup Holder,Multifunctional Car Cup Holder,Upgraded Sturdy Cup Drink Holder

  • .... The upgraded design, increased rubber sheet, so that the upper cup holder has better stability. The outer circumference of the lower cup holder groove is equipped with a flexible silicone film, which makes the lower cup holder better compatible with the car cup mouth and does not shake..
  • 【EASY TO INSTALL & USE】Insert the base into the original car cup holder. Updated the fixtures,it equipped with fixed blocks.If there is a gap between the installation position and the cup holder base, you can rotate the down cup holder to release the fixed bonds until fixed it. Rotate the upper cup holder clockwise as needed, saving space while using the multiple storage function..
  • 【SUITABLE FOR MOST CARS】This car cup holder is compatible with most vehicles, RVs, jeeps, trucks, etc. It fits standard round car cup holders with a diameter of 2.75-3.25 inches. It can prevent the sundries from falling on the ordinary card slot, making your car more neat and beautiful.We support customer after-sale service when unsatisfied.Adding it to your shopping cart now!!!.
Check Stock

Front Center Console Rubber Cup Holder Insert Fit for Toyota 4Runner 2010-2020,Replace 66991-350302,(2PCS)

  • Fitment: This front center console rubber cup holder insert fit for Toyota 4Runner 2010-2020, replace 66991-35030..
  • Excellent Function: The detachable original cup holder insert provides a smaller and more compact fixing area, which can be placed in the existing cup holder space, suitable for placing a narrow tumbler coffee cup and travel mug..
  • Premium Quality: Cup holder insert is made of rubber, stable performance and excellent impact resistance, can prevent water stains and rust from getting dirty inside the original cup holder..
  • Packing: 2* center console rubber cup holder..
  • What You Get: You will get 24-months service, buy it! If you have any questions, please contact us, we will reply you within 12 hours..
Check Stock

Sunniland Patio 1-1/2" Deluxe Wrought Iron Chair Glide | Black | Pack of: 16…

  • Sunniland Patio Brand is sold exclusively by Sunniland Patio. Beware of imitations of lesser quality from other suppliers..
  • These wrought iron chair glides fit a 1-1/2″ inside diameter cup on patio furniture feet..
  • Glide installs inside the metal cup on the bottom of the chair or table. Be sure to measure the inner diameter of the cup area to purchase the correct glide..
  • IMPORTANT-Always scrape away any worn metal or remains of old cap- Before measuring and installing..
  • Protects your patio surface, patio chair feet and patio legs from damage. Provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio..
Check Stock

Frienda 4 Pieces Car Cup Holder, Bling Cup Rhinestone Car Accessories Non-Slip Crystal Rhinestone Diamonds Vehicle Cup Holder Suitable for Most Car Interior Accessories, White Leopard

  • ...diamond round cup holder pad measures about 2.64 inches in diameter, and the thickness is approx. 0.3 inches, suitable for most cars interior accessories, which is practical for preventing from the hot temperature and absorbing the water, but also a nice decor for your car.
  • Elegant and glittering style: the non-slip insert drink cup holder adopts a stylish and shining design, it is decorated with glittering rhinestones, available in withe and yellow leopard patterns, looking very elegant and eye-catching, which will light up your car in a different way.
  • Waterproof and absorbent features: the shining bling car cup holders can absorb moisture as the water drips down your cups, which will be convenient for people who drink water regularly.
  • The cup holders are waterproof and they are not easy to fade even after multiple washes, which is convenient for you to clean for a long-time usage.
Check Stock