Reviews Rotor Thickness Measuring Device

Digital Rotary Viscometer with Temp. Probe 10-6, 000,000 mPa.s Viscosity Meter Tester with Data Communication and Printing Software, ±3% 110V

  • [APPLICTIONS]: This viscometer is mainly used to measure the absolute viscosity of the Newtonian liquids and the apparent viscosity of the Non-Newtonian liquid. Such as inks, paints, coatings, adhesives, greases, juices, dairy products, cosmetics, pharmaceuticals, biological fluids, rubber, mud, pulp, etc..
  • [PARAMETERS]: Measuring range:10-6,000,000Mpa.s, model: NDJ-9S, accuracy: ±3%, rotor type: #1, #2, #3, #4, rotating speed: 0.3,0.6,1.5,3, 6, 12, 30, 60rpm/min, voltage: 110V. For low-viscosity liquid, please equip with #0 rotor..
  • [DIGTAL CONTROL]: This unit adopts backlight LED screen, which will display the data more clearly. Rotor, rotating speed, viscosity and temperature are all displayed on the screen. Micro computer control, easy to operate. Data transfer software is installed..
  • [AUTO SEARCH]: This viscometer is functioned with auto search. You can enter to get the right rotor according to the viscosity of your liquid sample liquid. It will effectively reduce the measuring errors in the experiment..
  • [INGENIOUS DESIGN]: Level bubble&spike screws on the base help you get the right angle. Stainless steel rotor fender bracket will also reduce the measuring error owe to rotor shaking..
Check Stock

ACDelco Silver 18A812A Front Disc Brake Rotor Medium

  • Manufactured with multiple alloys for improved heat dissipation and performance.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage.
  • Economical value with dependable quality. Rotor Diameter-10.94 inch. Rotor Height-2.1 inch. Nominal Thickness-1.27 inch. Minimum Thickness-1.21 inch. Bolt Circle-4.65 inch.
  • For General Motors vehicles as well as most makes and models.
Check Stock

ACDelco Silver 18A816A Front Disc Brake Rotor

  • Manufactured with multiple alloys for improved heat dissipation and performance.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Rounded radius for added strength. Rotor Diameter-10.94 inch. Rotor Height-1.925 inch. Nominal Thickness-1.025 inch. Minimum Thickness-0.972 inch.
  • Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage.
  • Economical value with dependable quality.
  • For General Motors vehicles as well as most makes and models.
  • VEHICLE COMPATIBILITY :2004-2005 Chevrolet Classic 2.2L, 1997-1999 Chevrolet Malibu 2.4L,1999-2001 Oldsmobile Alero 2.4L, 1997-1999 Oldsmobile Cutlass,1999-2001 Pontiac Grand Am 2.4L..
Check Stock

ACDelco Silver 18A2719A Front Disc Brake Rotor

  • GMC Terrain 2010-2017.Material:Cast Iron.
  • Manufactured with multiple alloys for improved heat dissipation and performance.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Rounded radius for added strength. Rotor Diameter-12.64 inch. Rotor Height-2.01 inch. Nominal Thickness-1.181 inch. Minimum Thickness-1.063 inch. Bolt Circle-4.724 inch. Center Hole Diameter-2.7 inch.
  • Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage.
  • Economical value with dependable quality.
  • For General Motors vehicles as well as most makes and models.
Check Stock

Fowler 74-150-020 EZ-Drum Electronic Brake Drum Gage

  • Central Tools-Brake Fforcee Rotor Gauge-Digital accuracy with Swiss electronics.-Drum gages have selectable depth stops to reduce measuring errors.-Pointed Aanvill measure scored or unscored surfaces.-Show customers why their rotors or drums need replacing or turning.-Rotor gages have depth rods to check pad and shoe wear.-Specifications:.
Check Stock

New Replacement PP204 HA3004 1/2 Rotor Kit for Desa Reddy Master Heater #70-022-0100

  • ⭐PP204 / HA3004 1/2" Rotor Kit,Includes Rotor, Vanes, and Insert Rotor Kit 1/2" Thick Dia= 2 1/8"..
  • ⭐This kit (includes the vanes and insert) is used on a variety of different heater models. The other part numbers are: Desa part# PP204, GHP....
  • ⭐Other Part Numbers: PP204 , HA3004 , M22456-1 , 70-022-0100 , 700220100 , 71-022-1300 , 710221300 , SP-KFA1000 , SPKFA1000 , KFA1000 , 68-3043,and....
  • ⭐This kit (includes the vanes and insert) is Suitable for a variety of different brands, including Reddy,DESA,Master, Remington, Knipco, Koehring,....
  • ⭐Please measure the thickness of the rotor or the rotor steel ring to insure that you order the correct part.[Installation instructions, as shown in....
Check Stock

Shlia 62.4-Inch Inflatable Boxing Column Vertical Adult Inflatable Boxing Punching Bags Inflatable Tumbler (Includes PU Leather Adult Boxing Gloves and 4-inch Foot Pump.) (Black)

  • Precise Measuring -- The power measuring equipment for boxing can track power between 10kgs/22lb and 700kgs/ 1543lb with error around 200g/7.1oz.
  • Super Soft Punching Pad -- With numbers of experiments, INNOLIFE adopts 7cm thickness of sponge for the punching pad, which will neither harm your hand nor affect the measuring.
  • All to go -- The set-up of the boxing tracker is a breeze. Just hang the device on a load bearing wall and turn on the switch. The boxing power measurement device is ready in 2 seconds.
  • Standby Time -- The euqipment is with a built-in rechargeable battery. The stand-by time is around 72hrs afer the deivce being fully charged. Please turn off the device when not use to extend the service life of battery.
  • 3 Units Selection -- The device provides 3 different units displaying (kg/ lb/ N) and the number will be automatically converted if different unit is selected.
Check Stock

Power Stop K200 Front & Rear Brake Kit with Drilled/Slotted Brake Rotors and Z23 Evolution Ceramic Brake Pads

  • Power Stop engineered carbon-fiber ceramic compound significantly enhances braking performance versus traditional ceramic brake pads.
  • Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE.
  • Rotors are zinc plated for maximum protection against rust. Rotor Height- Front-1.9 inch, Rear- 1.6 inch. Hub Hole Diameter- Front-2.8 inch, Rear-2.8 inch. Bolt-On Ready: No modifications needed to your vehicle.
  • Includes stainless steel installation hardware and high temperature ceramic brake lubricant. Minimum Rotor Thickness: Front- 0.9 inch, Rear-0.3 inch. Nominal Rotor Thickness-Front-1 inch, Rear-0.4 inch. Outside Diameter-Front-11.8 inch, Rear-11 inch.
  • CONFIRM FITMENT with the Product Description below!.
Check Stock

TARAZON 220mm Rear Brake Disc Rotor for Kawasaki ZZR250 ZX2R ZXR250 1991-1995 Ninja 250R EX250 2008-2013

  • Wave shape brake disc rotor 30% light wieght than OEM, and good heat dissipation.
  • High quality stainless steel 420 2Cr13 ensure durable braking power, Heat Treatment Harness HRC 36+-2 ensure brake area not warped.
  • Fit KAWASAKI ZZR250 ZXR250 1991-1995/ EX250 NINJA 250R 2008-2013.
  • Rotor Size: 8 5/8 in.(220 mm) outer diameter, thickness 4.0 mm.
  • Including 1 piece rear brake disc rotor , we also have matched front rotor.
Check Stock

TARAZON Gold Set Front Rear Brake Rotors & Pads for Kawasaki Ninja ZX6R ZX6RR ZX600 ZX636 05 06 ZX10R 04 05 06 07

  • Complete full Set Brake Rotors and Pads kit, Detail fitment please see Description.
  • Wave shape brake disc rotor 20% light wieght than OEM Rotor, and good heat dissipation.
  • High quality stainless steel 420 2Cr13 and aluminum 6061 T6 material ensure durable braking power, Heat Treatment Harness HRC 36+-2 ensure brake area not warped.
  • Fit for Kawasaki Ninja ZX10R 2004 2005 2006 2007/ ZX6R ZX6RR 600 636 2005 2006.
  • Rotor Size: 11.8″ (300 MM) Outer Diameter,Thickness 5.0MM.
  • 8.65″ (220 MM) Rear Outer Diameter, Thickness 4.0mm.
Check Stock

TARAZON Front Brake Disc Rotor for Kawasaki EX250 E F J Ninja 250R GPX 250R GPX 250 R Ninja 87-07 GPX600 R

  • Wave shape brake disc rotor 30% light wieght than OEM, and good heat dissipation.
  • High quality stainless steel 420 2Cr13 ensure durable braking power, Heat Treatment Harness HRC 36+-2 ensure brake area not warped.
  • Fit KAWASAKI EX250 Ninja 250R 1987-2007/ GPX600 R Warbird 1988-1996/GPX250 R 1988-2005.
  • Rotor Size : 10 1/4″ (260 mm)outer diameter,thickness 5.0 mm.
  • Including 1 piece front brake rotor, we also have matched rear rotor.
Check Stock

ACDelco Silver 18A1412A Rear Disc Brake Rotor

  • Manufactured with multiple alloys for improved heat dissipation and performance.Material:Carbon Fiber.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Rounded radius for added strength. Rotor Diameter- 13 inch. Rotor Height-3.8 inch.
  • Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage.
  • Economical value with dependable quality.
  • For General Motors vehicles as well as most makes and models.
  • Durability – ACDelco Silver Brakes are designed to help resist corrosion and premature wear.
Check Stock

Power Stop JBR1121EVC Front Evolution  Geomet Coated Brake Rotor

  • All QuietCast rotors are factory mill precision balanced, which disperses the weight evenly, and allows for smooth, safe stops with no pedal pulsation.
  • Superior performance ensured by OEM style vane configuration that provides more efficient heat dissipation, reduced vibration for quieter operation, and extended rotor life.
  • Aluminum/Zinc coating protection prevents rust and corrosion, extending the life of the rotor while providing a clean look for today's open wheels.
  • OEM style ABS tone ring (on required applications) provides trouble free operation of Antilock Brake and Traction Control systems.
  • Every Bosch QuietCast rotor features an engraved discard thickness, that lets you know when the rotor has reached its useful life, and an “on-the-part” Bosch brand name, so you can be confident you are receiving an authentic Bosch product.
  • FRONT: Compatible with select vehicles (verify specific vehicle fitment details with fit checker above): TOYOTA: 2001-05 RAV4.
Check Stock